Issue 62, 2014

High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization

Abstract

Thin polythiophene film prepared via electrochemical polymerization has been successfully used as the hole-transporting layer in CH3NH3PbI3 perovskite solar cells, affording a series of ITO/polythiophene/CH3NH3PbI3/C60/BCP/Ag devices. The highest occupied molecular orbit (HOMO) and lowest unoccupied molecular orbit (LUMO) of the polythiophene film are determined as −5.20 eV and −3.12 eV, respectively, which match well with that of CH3NH3PbI3 perovskite material. In addition, a promising power conversion efficiency of 11.8%, featuring a high fill factor of 0.707, good open voltage of 1.03 V and short current density of 16.2 mA cm−2, has been obtained, which renders polythiophene as an effective competitor to spiro-OMeTAD in perovskite solar cells. Furthermore, this work provides a simple, prompt, controllable and economic approach for the preparation of hole-transporting layer, which would undoubtedly yield new insight into the industrial production of perovskite solar cells.

Graphical abstract: High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization

Supplementary files

Article information

Article type
Paper
Submitted
11 Чер 2014
Accepted
11 Лип 2014
First published
14 Лип 2014

RSC Adv., 2014,4, 33039-33046

High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization

W. Yan, Y. Li, W. Sun, H. Peng, S. Ye, Z. Liu, Z. Bian and C. Huang, RSC Adv., 2014, 4, 33039 DOI: 10.1039/C4RA05578K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements