Issue 7, 2013

Elemental mapping of microstructures by scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS): extraordinary advances with the silicon drift detector (SDD)

Abstract

Elemental mapping at the microstructural level by scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS), while widely applied in science, engineering, and technology, has been limited in performance by the throughput of the lithium-drifted silicon detector [Si(Li)-EDS] which restricts the number of X-ray counts measured per image pixel. The emergence of the silicon drift detector (SDD-EDS) has greatly extended the X-ray throughput, by a factor of 25 to 70 for the same spectral resolution. This improved performance enables practical X-ray spectrum imaging (XSI), in which a complete X-ray spectrum is recorded at each image pixel. By performing complete quantitative corrections for background, peak overlap, and matrix effects to each pixel spectrum, full compositional mapping can be achieved. Various elemental mapping collection strategies are described, including quantitative mapping at the major (concentration C > 0.1 mass fraction), minor (0.01 ≤ C ≤ 0.1), and trace (C < 0.01) constituent levels, extreme pixel density (gigapixel) mapping, rapid mapping (in 10 seconds or less), and high spatial resolution mapping with the thermal field emission gun scanning electron microscope.

Graphical abstract: Elemental mapping of microstructures by scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS): extraordinary advances with the silicon drift detector (SDD)

Article information

Article type
Critical Review
Submitted
23 Січ 2013
Accepted
15 Кві 2013
First published
19 Кві 2013

J. Anal. At. Spectrom., 2013,28, 973-988

Elemental mapping of microstructures by scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS): extraordinary advances with the silicon drift detector (SDD)

D. E. Newbury and N. W. M. Ritchie, J. Anal. At. Spectrom., 2013, 28, 973 DOI: 10.1039/C3JA50026H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements