Issue 23, 2019

Constructing fully carbon-based fillers with a hierarchical structure to fabricate highly thermally conductive polyimide nanocomposites

Abstract

A novel kind of fully carbon-based filler (f-MWCNT-g-rGO) is constructed by a reaction between melted urea functionalized multi-walled carbon nanotubes (f-MWCNTs) and graphene oxide (GO) followed by chemical reduction. The corresponding highly thermally conductive polyimide (f-MWCNT-g-rGO/PI) nanocomposites are then fabricated through the combined method of in situ polymerization, electrospinning and hot pressing. An improved thermal conduction model is also proposed and established considering the filler/matrix interfaces, filler dispersion and alignment, etc. The f-MWCNT-g-rGO fillers have a hierarchical “line-plane” structure. The fabricated f-MWCNT-g-rGO/PI nanocomposites possess an outstanding thermal conductivity coefficient (λ), and excellent thermal stabilities and mechanical properties. Specifically, the f-MWCNT-g-rGO/PI nanocomposites reach the maximum λ of 1.60 W m−1 K−1 at a relatively low loading of f-MWCNT-g-rGO fillers (10 wt%, the mass ratio of rGO to f-MWCNT is 2 : 1). In addition, the theoretical λ value calculated by our established thermal conduction model is more in line with the experimental λ values compared with other traditional models. Owing to the high thermal conductivities while preserving good mechanical properties and thermal stabilities at a relatively low loading of f-MWCNT-g-rGO filler, the f-MWCNT-g-rGO/PI nanocomposites are expected to be used as thermal pads in light emitting diode (LED) substrates and liquid crystal displays.

Graphical abstract: Constructing fully carbon-based fillers with a hierarchical structure to fabricate highly thermally conductive polyimide nanocomposites

Supplementary files

Article information

Article type
Paper
Submitted
03 Кві 2019
Accepted
17 Кві 2019
First published
17 Кві 2019

J. Mater. Chem. C, 2019,7, 7035-7044

Constructing fully carbon-based fillers with a hierarchical structure to fabricate highly thermally conductive polyimide nanocomposites

Y. Guo, K. Ruan, X. Yang, T. Ma, J. Kong, N. Wu, J. Zhang, J. Gu and Z. Guo, J. Mater. Chem. C, 2019, 7, 7035 DOI: 10.1039/C9TC01804B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements