Issue 8, 2016

Studies on the epoxidation of methallyl chloride over TS-1 microsphere catalysts in a continuous slurry reactor

Abstract

The epoxidation of methallyl chloride (MAC) to 2-methyl epichlorohydrin (MECH) with H2O2 using TS-1 microsphere catalysts (TS-1-MS) in a continuous slurry reactor was investigated. The reaction parameters, which governed the effective conversion of hydrogen peroxide, selectivity to MECH epoxide and catalyst deactivation, were studied in detail by simulating the operating conditions of its industrial process. Under the most beneficial conditions, the process was successfully run for 257 h at a high MECH selectivity (>95%) as well as a high effective conversion of hydrogen peroxide (>97%). The microsphere morphology and particle size were highly maintained for the deactivated TS-1-MS catalyst, which was regenerated readily by a combination of hydrogen peroxide washing and calcination. This research verified that it was possible to develop a green, safe and efficient route for producing MECH by direct epoxidation of MAC with hydrogen peroxide in a slurry reactor. Employing TS-1 microsphere aggregates as a catalyst exhibits the advantage of easy solid–liquid separation.

Graphical abstract: Studies on the epoxidation of methallyl chloride over TS-1 microsphere catalysts in a continuous slurry reactor

Supplementary files

Article information

Article type
Paper
Submitted
21 Лис 2015
Accepted
05 Січ 2016
First published
05 Січ 2016

Catal. Sci. Technol., 2016,6, 2605-2615

Studies on the epoxidation of methallyl chloride over TS-1 microsphere catalysts in a continuous slurry reactor

Z. Deng, Y. Yang, X. Lu, J. Ding, M. He and P. Wu, Catal. Sci. Technol., 2016, 6, 2605 DOI: 10.1039/C5CY02002F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements