Issue 37, 2024

Designing thermoreversible gels for extended release of mosquito repellent

Abstract

Mosquito-borne diseases are responsible for 700 000 deaths annually. Current outdoor protective strategies primarily focus on direct skin application of commercial repellents (i.e., aerosol sprays or topical lotions) which are typically limited to efficacy times of ≤10 hours due to rapid evaporation and dermal absorption. Consequently, frequent reapplication for continuous protection can increase associated health hazards and cause noncompliance. This study utilizes Hansen solubility parameter modeling to design physical gels composed of insect-repelling N,N-diethyl-meta-toluamide (DEET) and modacrylic copolymer poly(acrylonitrile-co-vinyl chloride) (P(AN–VC)). The P(AN–VC)/DEET composites exhibit tunable and reversible sol–gel transition temperatures that can meet the thermomechanical stability demands of the intended application and permit facile transition to commercial melt processing techniques such as injection molding, filament spinning, or film casting. P(AN–VC)/DEET gel films demonstrate mosquito repellency for more than half a year—performing longer than any other known material to date—due to the high reservoir of repellent and its desorption hindrance from the polymer matrix. Therefore, P(AN–VC)/DEET gels hold significant potential for extended protection against mosquitos and other biting arthropods.

Graphical abstract: Designing thermoreversible gels for extended release of mosquito repellent

Supplementary files

Article information

Article type
Paper
Submitted
25 Kho 2024
Accepted
08 Mha 2024
First published
12 Mha 2024

J. Mater. Chem. B, 2024,12, 9249-9257

Designing thermoreversible gels for extended release of mosquito repellent

J. Jimenez, J. E. Cilek, S. M. Schluep and J. G. Lundin, J. Mater. Chem. B, 2024, 12, 9249 DOI: 10.1039/D4TB01384K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements