Issue 3, 2022

Strain engineering in the oxygen reduction reaction and oxygen evolution reaction catalyzed by Pt-doped Ti2CF2

Abstract

Strain engineering is an effective strategy to tune the catalytic performance of catalysts. Herein, the strain effects on the catalytic performance of Pt-doped Ti2CF2 (Pt-VF-Ti2CF2) for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) were systematically studied using first principles calculations. Firstly, Pt-VF-Ti2CF2 exhibits metallic conductivity and good stability under strain in a range of āˆ’14% to 14%. Moreover, Pt-VF-Ti2CF2 under a compressive strain of 14% and tensile strain of 4% shows the highest ORR and OER catalytic performance with an overpotential of 0.45 V and 0.43 V, respectively. The overpotential of the ORR and OER can be reduced by 0.28 V and 0.03 V when a specific strain was applied. Additionally, Pt-VF-Ti2CF2 under a specific strain shows a higher selectivity by significantly suppressing the hydrogen evolution reaction (HER). Furthermore, we analyzed the reasons behind this performance boost. The enhanced catalytic performance of Pt-VF-Ti2CF2 by strain engineering can be attributed to the shift of the d-band center and work function. Overall, our work demonstrated that strain engineering can effectively improve the catalytic efficiency and selectivity of Pt-VF-Ti2CF2 and may provide insightful guidance for the design and development of other high-performance two-dimensional catalysts.

Graphical abstract: Strain engineering in the oxygen reduction reaction and oxygen evolution reaction catalyzed by Pt-doped Ti2CF2

Supplementary files

Article information

Article type
Paper
Submitted
27 Mha 2021
Accepted
29 Huk 2021
First published
09 Nā€™w 2021

J. Mater. Chem. A, 2022,10, 1390-1401

Strain engineering in the oxygen reduction reaction and oxygen evolution reaction catalyzed by Pt-doped Ti2CF2

N. Ma, N. Li, T. Wang, X. Ma and J. Fan, J. Mater. Chem. A, 2022, 10, 1390 DOI: 10.1039/D1TA07349D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements