Issue 33, 2022

A novel simultaneous isotope dilution strategy as a powerful tool in the two-track certification process of trace metal mass fractions: a case study of mercury, cadmium and lead in soil and sediment materials

Abstract

An analytical methodology based on isotope dilution (ID) principles was developed to establish the reference procedure for the simultaneous assignation of aqua regia extractable and total mass fractions of Hg, Cd, and Pb in soil and sediment matrix samples. The ‘twin sample-spike blends’ were prepared under close to the exact matching conditions, resulting in almost identical mass ratios of the spike to the sample in the blends, which followed either the aqua regia extraction method or total digestion procedure. The isotope ratios in ‘twin-blends’ were measured by inductively coupled plasma mass spectrometry (ICP-MS). The two-track IDMS strategy proposed in this work was successfully applied to three certified reference materials (CRMs): ERM-CC141 loam soil, EnvCRM 03 soil, and MODAS-2 bottom sediment. This ensured an adequate method validation. For two CRMs (EnvCRM 03 and MODAS-2) it was found that the isotope ratio values in ‘twin-blends’ for Hg, Cd, and Pb were almost identical with a variability of less than 2.4%. This confirmed that there is no measurable difference between the aqua regia extractable and the total mass fractions within the uncertainty ranges. Therefore, aqua regia mass fractions assigned in this study were found to be equal to certified element contents. For ERM-CC141 loam soil, the Hg isotope ratio values measured in the ‘twin-blends’ were found to be identical within their measurement uncertainties, and thus, it was concluded that the aqua regia extractable Hg content is identical to the total Hg content. However, in the case of Cd and Pb isotope ratio values in ‘twin-blends’ varied around 24% or 16%, respectively and because this significant difference was noticed, for both elements it is necessary to calculate the aqua regia content and the total content separately. Because this significant difference was noticed for both elements, it is necessary to calculate the aqua regia content and the total content separately. A detailed comparison of the isotope ratio values between the ‘twin-blends’ provided unambiguous information about aqua regia extractability of metals and it is a strong indicator for making decisions related to the assignment of either a single mass fraction valid for both procedures or two separate element mass fraction values. To our knowledge and based on the relevant literature survey, this is a novel strategy based on IDMS, and such studies have not been undertaken and presented so far.

Graphical abstract: A novel simultaneous isotope dilution strategy as a powerful tool in the two-track certification process of trace metal mass fractions: a case study of mercury, cadmium and lead in soil and sediment materials

Article information

Article type
Paper
Submitted
16 Mud 2022
Accepted
16 Maw 2022
First published
18 Maw 2022

Anal. Methods, 2022,14, 3160-3170

A novel simultaneous isotope dilution strategy as a powerful tool in the two-track certification process of trace metal mass fractions: a case study of mercury, cadmium and lead in soil and sediment materials

A. A. Krata and I. A. Wysocka, Anal. Methods, 2022, 14, 3160 DOI: 10.1039/D2AY00797E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements