Issue 31, 2021

Complementary effect of co-doping aliovalent elements Bi and Sb in self-compensated SnTe-based thermoelectric materials

Abstract

Research on Pb-free thermoelectric materials as a potential eco-friendly and solid-state source of energy has continuously advanced over time, with SnTe-based materials having shown utmost promising properties owing to their tunable electronic structure and scalable thermal conductivity. In this study, we self-compensate Sn to reduce inherent Sn vacancies, and further tune the carrier concentration by doping with Bi. Sb is further alloyed to incorporate nanostructures that significantly reduce the thermal conductivity. Multiple aliovalent dopants result in a continually decreased carrier concentration and subsequent significantly decreased electrical conductivity. The Seebeck values are seen to increase with temperature, where a maximum value of ∼171 μV K−1 is reported with a maximum power factor of ∼22.7 μW cm−1 K−2. We show through first principles DFT calculations the synergistic effect of Bi and Sb to introduce resonance states and an additional valence band convergence effect with increasing Sb that contribute to improved electronic properties. A decreased phonon frequency with co-doping is also reported. A maximum ZT of ∼0.8 at 823 K is reported in the Sn0.90Bi0.03Sb0.10Te composition, showing good potential in Sb co-doped SnTe-based materials.

Graphical abstract: Complementary effect of co-doping aliovalent elements Bi and Sb in self-compensated SnTe-based thermoelectric materials

Supplementary files

Article information

Article type
Paper
Submitted
11 Dzi 2021
Accepted
05 Maw 2021
First published
05 Maw 2021

J. Mater. Chem. C, 2021,9, 9922-9931

Complementary effect of co-doping aliovalent elements Bi and Sb in self-compensated SnTe-based thermoelectric materials

S. K. Kihoi, U. S. Shenoy, D. K. Bhat and H. S. Lee, J. Mater. Chem. C, 2021, 9, 9922 DOI: 10.1039/D1TC01676H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements