Issue 2, 2021

Photoresponse improvement of mixed-dimensional 1D–2D GaAs photodetectors by incorporating constructive interface states

Abstract

Mixed-dimensional optoelectronic devices bring new challenges and opportunities over the design of conventional low-dimensional devices. In this work, we develop unreported mixed-dimensional GaAs photodetectors by utilizing 1D GaAs nanowires (NWs) and 2D GaAs non-layered sheets (2DNLSs) as active device materials. The fabricated photodetector exhibits a responsivity of 677 A W−1 and a detectivity of 8.69 × 1012 cm Hz0.5 W−1 under 532 nm irradiation, which are already much better than those of state-of-the-art low-dimensional GaAs photodetectors. It is found that this unique device structure is capable of converting the notoriously harmful surface states of NWs and 2DNLSs into their constructive interface states, which contribute to the formation of quasi-type-II band structures and electron wells in the device channel for the substantial performance enhancement. More importantly, these interface states are demonstrated to be insensitive to ambient environments, indicating the superior stability of the device. All these results evidently illustrate a simple but effective way to utilize the surface states of nanomaterials to achieve the high-performance photodetectors.

Graphical abstract: Photoresponse improvement of mixed-dimensional 1D–2D GaAs photodetectors by incorporating constructive interface states

Supplementary files

Article information

Article type
Paper
Submitted
21 Ndz 2020
Accepted
11 N’w 2020
First published
11 N’w 2020

Nanoscale, 2021,13, 1086-1092

Photoresponse improvement of mixed-dimensional 1D–2D GaAs photodetectors by incorporating constructive interface states

D. Wang, X. Chen, X. Fang, J. Tang, F. Lin, X. Wang, G. Liu, L. Liao, J. C. Ho and Z. Wei, Nanoscale, 2021, 13, 1086 DOI: 10.1039/D0NR06788A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements