Issue 18, 2019

Thulium doped LaF3 for nanothermometry operating over 1000 nm

Abstract

The use and applications of infrared emitting rare-earth luminescent nanoparticles as nanothermometers have attracted a great deal of attention during the last few years. Researchers have regarded rare-earth doped luminescent nanoparticles as appealing systems due to their reliability, sensitivity and versatility for minimally invasive thermal sensing in nanomedicine. The challenge of developing nanothermometers operating over 1000 nm with outstanding brightness and enhanced sensitivity is being constantly addressed. In this sense, this work explores the potential of Tm3+ emissions at around 1.23 and 1.47 μm, under excitation at 690 nm, for ratiometric thermometry in Tm3+ doped LaF3 nanoparticles. The temperature dependence of the 1.23 μm emission band, which cannot be observed in systems such as NaNbO3:Tm, was demonstrated to be very effective and presented a relative thermal sensitivity as high as 1.9% °C−1. The physical mechanisms behind the strong thermal dependences were explained in terms of multiphonon decays and cross-relaxations. As a proof of concept, the nanothermometers presented were capable of accessing the basic properties of tissues in an ex vivo experiment using thermal relaxation dynamics.

Graphical abstract: Thulium doped LaF3 for nanothermometry operating over 1000 nm

Supplementary files

Article information

Article type
Paper
Submitted
03 Sun 2019
Accepted
04 Dzi 2019
First published
23 Dzi 2019

Nanoscale, 2019,11, 8864-8869

Thulium doped LaF3 for nanothermometry operating over 1000 nm

E. C. Ximendes, A. F. Pereira, U. Rocha, W. F. Silva, D. Jaque and C. Jacinto, Nanoscale, 2019, 11, 8864 DOI: 10.1039/C9NR00082H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements