Issue 5, 2019

Aluminum-doped NiO nanofibers as chemical sensors for selective and sensitive methanol detection

Abstract

One-dimensional nanomaterials with controlled morphology have received considerable attention as chemical sensors. Herein, we report a low-cost and facile method for manufacturing chemical sensors based on Al-doped NiO nanofibers. The structures and morphologies of the samples were characterized by SEM, TEM, SAED and XRD. Chemical sensors with 3 mol% Al-doped NiO nanofibers showed a response of 10.4 to 200 ppm methanol. The transient, dynamic, repeatability, selectivity, and long-term stability characteristics of the obtained sensors were tested, which indicated that these chemical sensors were promising for detecting methanol vapor in air.

Graphical abstract: Aluminum-doped NiO nanofibers as chemical sensors for selective and sensitive methanol detection

Article information

Article type
Paper
Submitted
12 Huk 2018
Accepted
14 N’w 2018
First published
17 N’w 2018

Anal. Methods, 2019,11, 575-581

Aluminum-doped NiO nanofibers as chemical sensors for selective and sensitive methanol detection

C. Feng, Z. Jiang, B. Chen, P. Cheng, Y. Wang and C. Huang, Anal. Methods, 2019, 11, 575 DOI: 10.1039/C8AY02460J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements