Issue 7, 2018

Ternary nanocomposites of Au/CuS/TiO2 for an ultrasensitive photoelectrochemical non-enzymatic glucose sensor

Abstract

A novel and highly sensitive photoelectrochemical biosensor for the detection of glucose based on ternary nanocomposites of Au/CuS/TiO2 (Au/CuS/TiO2) has been fabricated. Highly ordered TiO2 nanotube arrays (TiO2 NTs) were prepared by anodization of Ti foils, and CuS nanoparticles (NPs) and Au NPs were deposited on TiO2 NTs by the successive ionic layer adsorption and reaction (SILAR) method. The resultant Au/CuS/TiO2 exhibited excellent photoelectrochemical behavior as a glucose sensor under white light illumination due to the remarkable photocatalytic capabilities of TiO2 and CuS, and the surface plasmonic resonance (SPR) effect of Au NPs. The fabricated Au/CuS/TiO2 non-enzymatic photoelectrochemical sensor showed brilliant catalytic activity, favourable selectivity, good reproducibility and long-term stability for glucose detection under optimized conditions. The linear range was 0.1–3 μM (R = 0.9942) with a detection limit of 0.03 μM (S/N = 3). Moreover, the proposed sensor detected glucose in human serum samples. Thus, Au/CuS/TiO2 appears to be a promising photocatalyst for a non-enzymatic glucose sensor.

Graphical abstract: Ternary nanocomposites of Au/CuS/TiO2 for an ultrasensitive photoelectrochemical non-enzymatic glucose sensor

Article information

Article type
Paper
Submitted
31 Sun 2018
Accepted
21 Yan 2018
First published
27 Yan 2018

Analyst, 2018,143, 1699-1704

Ternary nanocomposites of Au/CuS/TiO2 for an ultrasensitive photoelectrochemical non-enzymatic glucose sensor

Y. Wang, L. Bai, Y. Wang, D. Qin, D. Shan and X. Lu, Analyst, 2018, 143, 1699 DOI: 10.1039/C8AN00187A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements