Issue 20, 2017

Thermal decomposition and recovery properties of ZnAl–CO3 layered double hydroxide for anionic dye adsorption: insight into the aggregative nucleation and growth mechanism of the LDH memory effect.

Abstract

The thermal decomposition of carbonate-intercalated layered double hydroxide (ZnAl–CO3-LDH) and recovery induced by water and dye solution addition were studied in situ by time-resolved wide angle X-ray scattering (WAXS) and time-resolved X-ray absorption spectroscopy (XAS), providing insights into the mechanisms of these structural transformations. LDH nanostructure recovery was driven by an aggregative nucleation and growth mechanism, which is limited by the steric hindrance caused by the adsorption of the Acid Blue 113 azo dye (AB) on the external surface of both the nanocrystalline tactoids and the exfoliated layers. The recovery behaviour in dye solution is consistent with the hypothesis of the LDH-recovery by a direct synthesis process, generating nanosized LDH particles with thickness about four times lower than those induced by water addition. These findings explain the higher AB adsorption capacity (1587 mg g−1) of calcined LDH, compared to pristine ZnAl–CO3-LDH (261.8 mg g−1) and also the efficient recycling of the spent adsorbent.

Graphical abstract: Thermal decomposition and recovery properties of ZnAl–CO3 layered double hydroxide for anionic dye adsorption: insight into the aggregative nucleation and growth mechanism of the LDH memory effect.

Supplementary files

Article information

Article type
Paper
Submitted
24 Sun 2017
Accepted
20 Dzi 2017
First published
20 Dzi 2017

J. Mater. Chem. A, 2017,5, 9998-10009

Thermal decomposition and recovery properties of ZnAl–CO3 layered double hydroxide for anionic dye adsorption: insight into the aggregative nucleation and growth mechanism of the LDH memory effect.

R. M. M. Santos, J. Tronto, V. Briois and C. V. Santilli, J. Mater. Chem. A, 2017, 5, 9998 DOI: 10.1039/C7TA00834A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements