Issue 4, 2017

Graphene hydrogel-based counter electrode for high efficiency quantum dot-sensitized solar cells

Abstract

Although copper sulfide and/or carbon materials have been utilized in counter electrodes (CEs) due to their good catalytic activity and conductivity, the efficiency of the assembled quantum dot-sensitized solar cells (QDSCs) is still unsatisfactory because of the relatively low photovoltage (Voc), which is commonly less than 0.7 V. In this study, graphene hydrogels (GHs) compressed onto titanium mesh served as the CE and the assembled CdSeTe QDSCs exhibited a photovoltaic conversion efficiency (PCE) of 9.85% and a Voc as high as 0.756 V, which increased by 19.0% and 14.9%, respectively, and are higher than those of the conventional CuS on FTO. By incorporating CuS nanoparticles into GH during gelation, the as-prepared GH–CuS CEs show further improved performance and the maximum PCE and Voc obtained were 10.71% and 0.786 V, respectively. The fill factor of the cells was also continuously increased. The excellent performance of the devices could be attributed to the synergistic effects of the water-rich GH (having a 3D porous structure accompanied by good conductivity) and highly catalytic CuS, reflected from the small series resistance, high catalytic activity, small electron transfer resistance, and stability, which have been confirmed by EIS, Tafel polarization, and CV curves.

Graphical abstract: Graphene hydrogel-based counter electrode for high efficiency quantum dot-sensitized solar cells

Supplementary files

Article information

Article type
Paper
Submitted
29 Ndz 2016
Accepted
11 N’w 2016
First published
12 N’w 2016

J. Mater. Chem. A, 2017,5, 1614-1622

Graphene hydrogel-based counter electrode for high efficiency quantum dot-sensitized solar cells

H. Zhang, C. Yang, Z. Du, D. Pan and X. Zhong, J. Mater. Chem. A, 2017, 5, 1614 DOI: 10.1039/C6TA08443E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements