Issue 41, 2019

Lattice strain and texture analysis of superhard Mo0.9W1.1BC and ReWC0.8via diamond anvil cell deformation

Abstract

Mo0.9W1.1BC and ReWC0.8 compositions have recently been identified to have exceptional hardness and incompressibility. In this work, these compositions are analyzed via in situ radial X-ray diffraction experiments to comparatively assess lattice strain and texture development. Traditionally, Earth scientists have employed these experiments to enhance understanding of dynamic activity within the deep Earth. However, nonhydrostatic compression experiments provide insight into materials with exceptional mechanical properties, as they help elucidate correlations between structural, elastic, and mechanical properties. Here, analysis of differential strain (t/G) and lattice preferred orientation in Mo0.9W1.1BC suggests that dislocation glide occurs along the (010) plane in orthorhombic Mo0.9W1.1BC. The (200) and (002) planes support the highest differential strain, while planes which bisect two or three axes, such as the (110) or (191), exhibit relatively lower differential strain. In ReWC0.8, which crystallizes in a cubic NaCl-type structure, planar density is correlated to orientation-dependent lattice strain as the low-density (311) plane elastically supports more differential strain than the denser (111), (200), and (220) planes. Furthermore, results indicate that ReWC0.8 likely supports a higher differential stress t than Mo0.9W1.1BC and, based on a lack of texture development, bulk plastic yielding is not observed in ReWC0.8 upon compression to ∼60 GPa.

Graphical abstract: Lattice strain and texture analysis of superhard Mo0.9W1.1BC and ReWC0.8via diamond anvil cell deformation

Supplementary files

Article information

Article type
Paper
Submitted
16 มิ.ย. 2562
Accepted
30 ส.ค. 2562
First published
30 ส.ค. 2562

J. Mater. Chem. A, 2019,7, 24012-24018

Author version available

Lattice strain and texture analysis of superhard Mo0.9W1.1BC and ReWC0.8via diamond anvil cell deformation

M. Parry, S. Couper, A. Mansouri Tehrani, A. O. Oliynyk, J. Brgoch, L. Miyagi and T. D. Sparks, J. Mater. Chem. A, 2019, 7, 24012 DOI: 10.1039/C9TA06431A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements