Issue 30, 2012

Optimizing Li+ conductivity in a garnet framework

Abstract

The garnet-related oxides with the general formula Li7−xLa3Zr2−xTaxO12 (0 ≤ x ≤ 1) were prepared by conventional solid-state reaction. X-ray diffraction (XRD), neutron diffraction and AC impedance were used to determine phase formation and the lithium-ion conductivity. The lattice parameter of Li7−xLa3Zr2−xTaxO12 decreased linearly with increasing x. Optimum Li-ion conductivity in the Li-ion garnets Li7−xLa3Zr2−xTaxO12 is found in the range 0.4 ≤ x ≤ 0.6 for samples fired at 1140 °C in an alumina crucible. A room-temperature σLi ≈ 1.0 × 10−3 S cm−1 for x = 0.6 with an activation energy of 0.35 eV in the temperature range of 298–430 K makes this Li-ion solid electrolyte attractive for a new family of Li-ion rechargeable batteries.

Graphical abstract: Optimizing Li+ conductivity in a garnet framework

Article information

Article type
Paper
Submitted
07 มี.ค. 2555
Accepted
03 มิ.ย. 2555
First published
07 มิ.ย. 2555

J. Mater. Chem., 2012,22, 15357-15361

Optimizing Li+ conductivity in a garnet framework

Y. Li, J. T. Han, C. A. Wang, H. Xie and J. B. Goodenough, J. Mater. Chem., 2012, 22, 15357 DOI: 10.1039/C2JM31413D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements