Issue 27, 2018

Antimicrobial and optical properties of PET chemically modified and grafted with borane compounds

Abstract

Polyethylene terephthalate (PET) foils were activated with piranha solution and grafted with selected amino compounds (cysteamine, ethylenediamine or chitosan) and then with borane compounds. Changes in their surface properties after particular modification steps were examined using electrokinetic analysis, X-ray photoelectron spectroscopy (XPS), goniometry and UV-vis spectroscopy. Several tests showed that the presence of some amino compounds and one borane cluster significantly improved the antimicrobial properties of the composites investigated. In particular, they exhibited strong antibacterial activity against Staphylococcus epidermidis but only weak activity against Escherichia coli. The samples modified with amino compounds and subsequently with borane clusters were luminescent under UV lamp irradiation. Therefore, the nanocomposites consisting of (cheap) polymer and (more expensive) borane could be used in luminophore development, medicine or environmental protection.

Graphical abstract: Antimicrobial and optical properties of PET chemically modified and grafted with borane compounds

Article information

Article type
Paper
Submitted
20 ธ.ค. 2560
Accepted
02 เม.ย. 2561
First published
20 เม.ย. 2561
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 15001-15008

Antimicrobial and optical properties of PET chemically modified and grafted with borane compounds

M. Benkocká, S. Lupínková, J. Matoušek, K. Kolářová and Z. Kolská, RSC Adv., 2018, 8, 15001 DOI: 10.1039/C7RA13502E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements