Issue 1, 2016

Tubular optical microcavities of indefinite medium for sensitive liquid refractometers

Abstract

Optical microcavities enable circulated light to intensively interact with a detecting liquid, thus promising high sensitivity in fluidic refractometers. Based on Mie scattering theory, we propose a tubular metamaterial device for liquid sensing, which utilizes anisotropic metamaterials with hyperbolic dispersion called indefinite media (IM). Besides traditional whispering gallery modes (WGMs), such tubular cavities can support surface plasmon polariton (SPP) WGMs, enabling high sensitivity liquid detection. Three configurations of such metamaterial tubes for sensing are discussed: tube-in-liquid, hollow-tube-in-liquid and liquid-in-tube; these are analyzed using numerical formulas and compared with dielectric and metal materials. Compared with traditional dielectric media (DM), the IM tubular cavity exhibits a higher sensitivity (S), which is close to that of a metal tubular cavity. However, compared with metal media, such an IM cavity can achieve higher quality (Q) factors similar to the DM tubular cavity. Therefore, the IM tubular cavity can offer the highest figures of merit (QS) for the sensing performance among the three types of materials. Our results suggest a novel tubular optofluidic device based on metamaterials, which could be useful for liquid refractometers.

Graphical abstract: Tubular optical microcavities of indefinite medium for sensitive liquid refractometers

  • This article is part of the themed collection: Optofluidics

Article information

Article type
Paper
Submitted
13 ต.ค. 2558
Accepted
09 พ.ย. 2558
First published
09 พ.ย. 2558

Lab Chip, 2016,16, 182-187

Tubular optical microcavities of indefinite medium for sensitive liquid refractometers

S. Tang, Y. Fang, Z. Liu, L. Zhou and Y. Mei, Lab Chip, 2016, 16, 182 DOI: 10.1039/C5LC01266J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements