Issue 5, 2022

Enhancing the lifetime of inverted perovskite solar cells using a new hydrophobic hole transport material

Abstract

Conjugated polymers are a family of materials that are widely used as Hole Transport Layers (HTL) in perovskite solar cells (PSCs). Specifically, PEDOT:PSS is a widely used conjugated polymer in inverted PSCs that suffers from poor stability. Here, the lifetime of inverted PSCs is extended by employing for the first time the hydrophobic conjugated polymer PIDTTDQ. The performance of the optimized PIDTTDQ device reaches a maximum PCE of 14.70%, compared to the reference device with PEDOT:PSS at 12.16%. The enhanced PCE is due to the improved HTL/Perovskite interface, confirmed by Transient measurements. Finally, the ISOS D1 and L2 protocols revealed an enhanced moisture, light and thermal stability of the PSCs.

Graphical abstract: Enhancing the lifetime of inverted perovskite solar cells using a new hydrophobic hole transport material

Supplementary files

Article information

Article type
Paper
Submitted
29 มี.ค. 2565
Accepted
07 เม.ย. 2565
First published
08 เม.ย. 2565
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2022,1, 312-320

Enhancing the lifetime of inverted perovskite solar cells using a new hydrophobic hole transport material

M. Loizos, M. Tountas, N. Tzoganakis, C. L. Chochos, A. Nega, A. Schiza, C. Polyzoidis, V. G. Gregoriou and E. Kymakis, Energy Adv., 2022, 1, 312 DOI: 10.1039/D2YA00067A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements