Issue 3, 2021

Plasmonic foam platforms for air quality monitoring

Abstract

Plasmonic reversible gas sensors are of paramount importance for the monitoring of indoor environments. Herein, we design and engineer a plasmonic foam, with a high surface area, confined inside a capillary glass tube for the live monitoring of carbon monoxide (CO) in closed environments using surface-enhanced resonance Raman scattering. The illumination of the sensor with light during the flow of air allows the live monitoring of the concentration of atmospheric CO through surface-enhanced resonance Raman scattering. The sensor was prepared with a detection range from 10 to 40 ppm, due to health needs. The results show a sensitive, selective, reversible and robust sensor applicable to the monitoring of CO levels but also to other gas species upon appropriate functionalization.

Graphical abstract: Plasmonic foam platforms for air quality monitoring

Article information

Article type
Paper
Submitted
27 ต.ค. 2563
Accepted
16 ธ.ค. 2563
First published
17 ธ.ค. 2563

Nanoscale, 2021,13, 1738-1744

Plasmonic foam platforms for air quality monitoring

I. B. Becerril-Castro, F. Munoz-Munoz, A. B. Castro-Ceseña, A. L. González, R. A. Alvarez-Puebla and J. M. Romo-Herrera, Nanoscale, 2021, 13, 1738 DOI: 10.1039/D0NR07686D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements