Issue 47, 2019

Buckled AgNW/MXene hybrid hierarchical sponges for high-performance electromagnetic interference shielding

Abstract

The development of electromagnetic interference (EMI) shielding materials is moving forward towards being lightweight and showing high-performance. Here, we report on lightweight silver nanowire (AgNW)/MXene hybrid sponges featuring hierarchical structures that are fabricated by a combination of dip-coating and unidirectional freeze-drying methods. The commercial melamine formaldehyde sponges (MF), designed with a buckled structure, are chosen as the template for coating with the AgNW layer (BMF/AgNW). Furthermore, the additional irregular honeycomb architecture composed of MXene assembled cell walls is introduced inside the BMF cell–matrix through unidirectional freeze-drying of MXene aqueous suspensions. Consequently, the BMF/AgNW presents a better EMI shielding effectiveness of 40.0 dB contributed by the conductive network and multiple reflections and scattering compared with the MF/AgNW. Eventually, the resulting AgNW/MXene hybrid sponge exhibits a higher EMI shielding effectiveness of 52.6 dB with a low density of 49.5 mg cm−3 compared with the BMF/AgNW due to synergetic effects of the AgNW and MXene both in conductivity and hierarchical structure. These results also provide a novel way to fabricate lightweight and conductive sponges as high-performance EMI shielding materials.

Graphical abstract: Buckled AgNW/MXene hybrid hierarchical sponges for high-performance electromagnetic interference shielding

Supplementary files

Article information

Article type
Paper
Submitted
17 ก.ย. 2562
Accepted
28 ต.ค. 2562
First published
29 ต.ค. 2562

Nanoscale, 2019,11, 22804-22812

Buckled AgNW/MXene hybrid hierarchical sponges for high-performance electromagnetic interference shielding

C. Weng, G. Wang, Z. Dai, Y. Pei, L. Liu and Z. Zhang, Nanoscale, 2019, 11, 22804 DOI: 10.1039/C9NR07988B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements