Issue 24, 2015

Very fast catalytic reduction of 4-nitrophenol, methylene blue and eosin Y in natural waters using green chemistry: p(tannic acid)–Cu ionic liquid composites

Abstract

Using tannic acid (TA) as a biopolymer, poly(tannic Acid) (p(TA)) microgels were obtained by cross-linking TA with trimethylolpropane triglycidyl ether (TMPGDE) as cross-linker in a water-in-oil micro emulsion system. Ionic liquid forms of p(TA) micro particles were prepared as Ionic Liquid Colloids (ILC) by post chemical modification of p(TA) particles using quaternization agents such as 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CHPACl) and ammonia (NH3) in aqueous solution to generate positively-charged ammonium salts on the network. Then the modified p(TA) micro particles were used as template for Co, Ni, and Cu metal nanoparticle preparation in situ after loading of metal salts such as CoCl2, NiCl2, and CuCl2 from ethyl alcohol solution into the p(TA) network, and consequent reduction with sodium borohydride (NaBH4). The prepared metal nanoparticle-containing ILCs of p(TA) microgel composites were used as catalysts in the reduction of toxic organic compounds such as 4-nitrophenol (4-NP), eosin Y (EY), and methylene blue (MB). Various parameters affecting the 4-NP and MB reduction were investigated. The activation energy, enthalpy, and entropy for the reduction of 4-NP to 4-AP catalyzed by ILC p(TA)-co composite catalyst system were calculated as 26.19 kJ mol−1, 23.12 kJ mol−1, and −182.35 J mol−1 K−1, respectively.

Graphical abstract: Very fast catalytic reduction of 4-nitrophenol, methylene blue and eosin Y in natural waters using green chemistry: p(tannic acid)–Cu ionic liquid composites

Article information

Article type
Paper
Submitted
04 ม.ค. 2558
Accepted
02 ก.พ. 2558
First published
03 ก.พ. 2558

RSC Adv., 2015,5, 18183-18195

Author version available

Very fast catalytic reduction of 4-nitrophenol, methylene blue and eosin Y in natural waters using green chemistry: p(tannic acid)–Cu ionic liquid composites

N. Sahiner, S. Sagbas and N. Aktas, RSC Adv., 2015, 5, 18183 DOI: 10.1039/C5RA00126A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements