Issue 5, 2023

Rheology of 3D printable ceramic suspensions: effects of non-adsorbing polymer on discontinuous shear thickening

Abstract

Concentrated suspensions of particles at volume fractions (ϕ) ≥ 0.5 often exhibit complex rheological behavior, transitioning from shear thinning to shear thickening as the shear stress or shear rate is increased. These suspensions can be extruded to form 3D structures, with non-adsorbing polymers often added as rheology modifiers to improve printability. Understanding how non-adsorbing polymers affect the suspension rheology, particularly the onset of shear thickening, is critical to the design of particle inks that will extrude uniformly. In this work, we examine the rheology of concentrated aqueous suspensions of colloidal alumina particles and the effects of adding non-adsorbing polyvinylpyrrolidone (PVP). First, we show that suspensions with ϕalumina = 0.560–0.575 exhibited discontinuous shear thickening (DST), where the viscosity increased by up to two orders of magnitude above an onset stress (τmin). Increasing ϕalumina from 0.550 to 0.575 increased the viscosity and yield stress in the shear thinning regime and decreased τmin. Next, PVP was added at concentrations within the dilute and semi-dilute non-entangled regimes of polymer conformation (ϕPVP = 0.005–0.050) to suspensions with constant ϕalumina = 0.550. DST was observed in all cases and increasing ϕPVP increased the viscosity and yield stress. Interestingly, increasing ϕPVP also increased τmin. We posit that the free PVP chains act as lubricants between alumina particles, increasing the stress needed to induce thickening. Finally, we demonstrate through direct comparisons of suspensions with and without PVP how non-adsorbing polymer addition can extend the extrusion processing window due to the increase in τmin.

Graphical abstract: Rheology of 3D printable ceramic suspensions: effects of non-adsorbing polymer on discontinuous shear thickening

Supplementary files

Article information

Article type
Paper
Submitted
22 ต.ค. 2565
Accepted
09 ม.ค. 2566
First published
09 ม.ค. 2566

Soft Matter, 2023,19, 882-891

Author version available

Rheology of 3D printable ceramic suspensions: effects of non-adsorbing polymer on discontinuous shear thickening

R. D. Corder, Y. Chen, P. Pibulchinda, J. P. Youngblood, A. M. Ardekani and K. A. Erk, Soft Matter, 2023, 19, 882 DOI: 10.1039/D2SM01396G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements