Effect of surfactant concentration on the evaporation-driven deposition of carbon nanotubes: from coffee-ring effect to strain sensing

Mohammad Jalal Inanlu, Jafar Farhadi, Ehsan Ansari, Saina Charkas and Vahid Bazargan

RSC Adv., 2022, 12, 31688
DOI: 10.1039/D2RA03833A

Inkjet printing for scalable and patterned fabrication of halide perovskite-based optoelectronic devices

Yongqing Duan, Guannan Zhang, Rui Yu, Hanyuan Zhang, Guangda Niu, YongAn Huang and Zhouping Yin

J. Mater. Chem. C, 2022, 10, 14379
DOI: 10.1039/D2TC02553A

Additive electronics manufacturing via droplet jetting technologies: materials, methods, applications, and opportunities

Ethan B. Secor, Daniel Yeboah and Livio Gamba

Nanoscale, 2025, 17, 18997
DOI: 10.1039/D5NR02110C

Design and fabrication of a flexible glucose sensing platform toward rapid battery-free detection of hyperglycaemia

Hajime Fujita, Kento Yamagishi, Wenshen Zhou, Yu Tahara, Shao Ying Huang, Michinao Hashimoto and Toshinori Fujie

J. Mater. Chem. C, 2021, 9, 7336
DOI: 10.1039/D1TC00667C

Room temperature sonochemically-initiated dehydrogenative coupling of silanes on silicon nanoparticle surfaces

Jonathan Trach, Cole Butler, Mia Dolanjski, Alkiviathes Meldrum and Jonathan G. C. Veinot

Nanoscale, 2026, 18, 5544
DOI: 10.1039/D5NR04768D

Applications, fluid mechanics, and colloidal science of carbon-nanotube-based 3D printable inks

Beihan Zhao, Vishal Sankar Sivasankar, Swarup Kumar Subudhi, Shayandev Sinha, Abhijit Dasgupta and Siddhartha Das

Nanoscale, 2022, 14, 14858
DOI: 10.1039/D1NR04912G

Unveiling the recent advances in micro-electrode materials and configurations for sodium-ion micro-batteries

Mina Moghadami, Abouzar Massoudi and Mahya Nangir

J. Mater. Chem. A, 2024, 12, 17923
DOI: 10.1039/D4TA02096K

All-solution-processed mid-infrared electrochromics (ASPIRE) for thermoregulation with arbitrary curvatures

Pei-Jan Hung, Qizhang Li, Ting-Hsuan Chen, Xubing Wu, Ching-Tai Fu, Yu Han, Ronghui Wu, Gangbin Yan, Qingsong Fan, Yunhao Zhao, Jiadong Liu, Pin-Ruei Huang, Yuanke Chen, Chenxi Sui, Genesis Higueros, Alex Flores, Fengyuan Shi and Po-Chun Hsu

Mater. Horiz., 2026
DOI: 10.1039/D5MH02110C

Advancement in functionalized luminescent frameworks and their prospective applications as inkjet-printed sensors and anti-counterfeit materials

Abhijit Hazra, Udayan Mondal, Sukdeb Mandal and Priyabrata Banerjee

Dalton Trans., 2021, 50, 8657
DOI: 10.1039/D1DT00705J

Inkjet assisted fabrication of planar biocompatible memristors

Georgii A. Illarionov, Denis S. Kolchanov, Oleg A. Kuchur, Mikhail V. Zhukov, Ekaterina Sergeeva, Vladimir V. Krishtop, Alexandr V. Vinogradov and Maxim I. Morozov

RSC Adv., 2019, 9, 35998
DOI: 10.1039/C9RA08114C

Metal oxide heterojunctions using a printable nickel oxide ink

Hari Ramachandran, Mohammad Mahaboob Jahanara, Nitheesh M. Nair and P. Swaminathan

RSC Adv., 2020, 10, 3951
DOI: 10.1039/C9RA08466E

Recent advances and prospects of inkjet printing in heterogeneous catalysis

Hesam Maleki and Volfango Bertola

Catal. Sci. Technol., 2020, 10, 3140
DOI: 10.1039/D0CY00040J

Design and synthesis of low temperature printed metal oxide memristors

Emanuel Carlos, Jonas Deuermeier, Rita Branquinho, Cristina Gaspar, Rodrigo Martins, Asal Kiazadeh and Elvira Fortunato

J. Mater. Chem. C, 2021, 9, 3911
DOI: 10.1039/D0TC05368F

Micro-to-nanometer patterning of solution-based materials for electronics and optoelectronics

Yo-Han Suh, Dong-Wook Shin and Young Tea Chun

RSC Adv., 2019, 9, 38085
DOI: 10.1039/C9RA07514C

Fabricating flexible conductive structures by printing techniques and printable conductive materials

Jiazhen Sun, Rui Sun, Peng Jia, Mengdi Ma and Yanlin Song

J. Mater. Chem. C, 2022, 10, 9441
DOI: 10.1039/D2TC01168A

A binder jet 3D printed MXene composite for strain sensing and energy storage application

Terek Li, Tianhao Chen, Xuechen Shen, HaoTian Harvey Shi, Elahe Jabari and Hani E. Naguib

Nanoscale Adv., 2022, 4, 916
DOI: 10.1039/D1NA00698C

Toward flexible memory application: high-performance phase-change magnetic material Fe:GeTe films realized via quasi-van der Waals epitaxy

Jindong Liu

J. Mater. Chem. C, 2022, 10, 9891
DOI: 10.1039/D2TC01989B

Sacrificial ligand route to hybrid polythiophene–silver nanoparticles for sinter-free conductive inks

Juraj Drzic, Alberto Escudero, Lola González-García and Tobias Kraus

Inorg. Chem. Front., 2023, 10, 1552
DOI: 10.1039/D2QI02722D

Emerging strategies for inkjet-printed perovskite quantum dots in high-performance LED displays

Loan Thi Ngo, Yen-Huei Lin and Ru-Shi Liu

Mater. Horiz., 2025, 12, 7683
DOI: 10.1039/D5MH00395D

Copper inks for printed electronics: a review

Xianghui Zeng, Pei He, Minglu Hu, Weikai Zhao, Huitong Chen, Longhui Liu, Jia Sun and Junliang Yang

Nanoscale, 2022, 14, 16003
DOI: 10.1039/D2NR03990G

Direct ink writing of energy materials

S. Tagliaferri, A. Panagiotopoulos and C. Mattevi

Mater. Adv., 2021, 2, 540
DOI: 10.1039/D0MA00753F

Mode-tunable, micro/nanoscale electrohydrodynamic deposition techniques for optoelectronic device fabrication

Yongqing Duan, Huayang Li, Weili Yang, Zhilong Shao, Qilu Wang, YongAn Huang and Zhouping Yin

Nanoscale, 2022, 14, 13452
DOI: 10.1039/D2NR03049G

A novel CuFe2O4 ink for the fabrication of low-temperature ceramic fuel cell cathodes through inkjet printing

Sanaz Zarabi Golkhatmi, Peter D. Lund and Muhammad Imran Asghar

Mater. Adv., 2024, 5, 143
DOI: 10.1039/D3MA00352C

High performance multi-purpose nanostructured thin films by inkjet printing: Au micro-electrodes and SERS substrates

Simona Ricci, Marco Buonomo, Stefano Casalini, Sara Bonacchi, Moreno Meneghetti and Lucio Litti

Nanoscale Adv., 2023, 5, 1970
DOI: 10.1039/D2NA00917J

Evolution of low-dimensional material-based field-effect transistors

Waqas Ahmad, Youning Gong, Ghulam Abbas, Karim Khan, Maaz Khan, Ghafar Ali, Ahmed Shuja, Ayesha Khan Tareen, Qasim Khan and Delong Li

Nanoscale, 2021, 13, 5162
DOI: 10.1039/D0NR07548E

Surface and Interface Designs in Copper-Based Conductive Inks for Printed/Flexible Electronics

Daisuke Tomotoshi and Hideya Kawasaki

Nanomaterials, 2020, 10, 1689
DOI: 10.3390/nano10091689

Characterization of self-assembled silver nanoparticle ink based on nanoemulsion method

Donghao Hu, Kazuyoshi Ogawa, Mikio Kajiyama and Toshiharu Enomae

R. Soc. open sci., 2020, 7, 200296
DOI: 10.1098/rsos.200296

Use of graphene-based fabric sensors for monitoring human activities

Qinhua Hu, Anindya Nag, Yongzhao Xu, Tao Han and Lijuan Zhang

Sensors and Actuators A: Physical, 2021, 332, 113172
DOI: 10.1016/j.sna.2021.113172

Recent Progress in Electrohydrodynamic Jet Printing for Printed Electronics: From 0D to 3D Materials

Sheng Bi, Rongyi Wang, Xu Han, Yao Wang, Dongchen Tan, Baiou Shi, Chengming Jiang, Zhengran He and Kyeiwaa Asare-Yeboah

Coatings, 2023, 13, 1150
DOI: 10.3390/coatings13071150

An Inkjet-Printable Fluorescent Thermal Sensor Based on Cdse/Zns Quantum Dots Immobilised in a Silicone Matrix

Liesbeth Birchall, Aleksandra Foerster, Graham A. Rance, Anna Terry, Christopher J. Tuck and Ricky D. Wildman

SSRN Journal, 2022
DOI: 10.2139/ssrn.4125828

Droplet‐Based Techniques for Printing of Functional Inks for Flexible Physical Sensors

Hamed Abdolmaleki, Preben Kidmose and Shweta Agarwala

Advanced Materials, 2021, 33
DOI: 10.1002/adma.202006792

Experimental Study of the Jetting Behavior of High-Viscosity Nanosilver Inks in Inkjet-Based 3D Printing

Xingzhi Xiao, Gang Li, Tingting Liu and Mingfei Gu

Nanomaterials, 2022, 12, 3076
DOI: 10.3390/nano12173076

RETRACTED: Structure, substructure and chemical composition of ZnO nanocrystals and films deposited onto flexible substrates

О. Dobrozhan, І. Shelest, А. Stepanenko, D. Kurbatov, M. Yermakov, A. Čerškus, S. Plotnikov and А. Opanasyuk

Materials Science in Semiconductor Processing, 2020, 108, 104879
DOI: 10.1016/j.mssp.2019.104879

Solution processed organic thermoelectric generators as energy harvesters for the Internet of Things

Nathan Pataki, Pietro Rossi and Mario Caironi

Applied Physics Letters, 2022, 121
DOI: 10.1063/5.0129861

The mechanism study of laser peeling of ultra-thin polyimide film from the transparent substrate

Jinhua Hong, Peng Cheng, Jinhong Guo, Wei Chen, Yulong Li, Jizhong Liu, Qinmiao Zhu and Jiankui Chen

Surfaces and Interfaces, 2023, 36, 102561
DOI: 10.1016/j.surfin.2022.102561

Inkjet-printed strain sensors for monitoring cylindrical pressure vessels

Youri Nouchokgwe, Torsten Granzow, Stephanie Girod, Sebastien Gergen, Olivier Bouton, Emmanuel Defay, Veronika Kovacova and Sebastjan Glinsek

APL Electronic Devices, 2025, 1
DOI: 10.1063/5.0279607

Fully Printed Inverters using Metal‐Oxide Semiconductor and Graphene Passives on Flexible Substrates

Surya Abhishek Singaraju, Gabriel Cadilha Marques, Patric Gruber, Robert Kruk, Horst Hahn, Ben Breitung and Jasmin Aghassi-Hagmann

Physica Rapid Research Ltrs, 2020, 14
DOI: 10.1002/pssr.202000252

Printed Strain Sensors for On‐Skin Electronics

Yizong Li, Yuxuan Liu, Shah Rifat Alam Bhuiyan, Yong Zhu and Shanshan Yao

Small Structures, 2022, 3
DOI: 10.1002/sstr.202100131

A flexible triboelectric sensor based on P(VDF-co-HFP)/MXene for breath and posture monitoring in basketball motion

Yang Li and Dongyuan Xu

Materials Technology, 2023, 38
DOI: 10.1080/10667857.2023.2262131

Advances in carbon-based flexible temperature sensors: Materials, mechanism, fabrication, and applications

Waseem Ahmad, Muhammad Tarique, Rimsha Abbas, Ijaz Ahmad, Fizzah Qayyum, Suzhu Yu and Jun Wei

Journal of Alloys and Compounds, 2026, 1060, 187125
DOI: 10.1016/j.jallcom.2026.187125

Electrochemical Detection of Glucose Molecules Using Laser-Induced Graphene Sensors: A Review

Jingrong Gao, Shan He and Anindya Nag

Sensors, 2021, 21, 2818
DOI: 10.3390/s21082818

Printable Smart Materials and Devices: Strategies and Applications

Meng Su and Yanlin Song

Chem. Rev., 2022, 122, 5144
DOI: 10.1021/acs.chemrev.1c00303

Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents

Geoffrey Rivers, Jonathan S. Austin, Yinfeng He, Adam Thompson, Negar Gilani, Nathan Roberts, Peng Zhao, Christopher J. Tuck, Richard J.M. Hague, Ricky D. Wildman and Lyudmila Turyanska

Additive Manufacturing, 2023, 66, 103452
DOI: 10.1016/j.addma.2023.103452

Functional Nanomaterials for Advanced Bioelectrode Interfaces: Recent Advances in Disease Detection and Metabolic Monitoring

Junlong Ma, Siyi Yang, Zhihao Yang, Ziliang He and Zhanhong Du

Sensors, 2025, 25, 4412
DOI: 10.3390/s25144412

Slot-Die Coating Operability Window for Nanoparticle Bed Deposition in a Microscale Selective Laser Sintering Tool

Dipankar Behera, Daniel Liao and Michael A. Cullinan

Journal of Micro and Nano-Manufacturing, 2020, 8
DOI: 10.1115/1.4049668

Fabrication of Conductive and Gas-Sensing Microstructures Using Focused Deposition of Copper Nanoparticles Synthesized by Spark Discharge

Alexey A. Efimov, Denis V. Kornyushin, Arseny I. Buchnev, Ekaterina I. Kameneva, Anna A. Lizunova, Pavel V. Arsenov, Andrey E. Varfolomeev, Nikita B. Pavzderin, Alexey V. Nikonov and Victor V. Ivanov

Applied Sciences, 2021, 11, 5791
DOI: 10.3390/app11135791

Aerosol Jet Printing and Interconnection Technologies on Additive Manufactured Substrates

Kai Werum, Ernst Mueller, Juergen Keck, Jonas Jaeger, Tim Horter, Kerstin Glaeser, Sascha Buschkamp, Maximilian Barth, Wolfgang Eberhardt and André Zimmermann

JMMP, 2022, 6, 119
DOI: 10.3390/jmmp6050119

Oblique drop impact: can one infer the angle of impact?

Vanessa R. Kern, Cathy Jin, J. B. Bostwick and P. H. Steen

J. Fluid Mech., 2022, 948
DOI: 10.1017/jfm.2022.736

Binder-free electrodes for advanced potassium-ion batteries: A review

Wencong Liu, Wenyi Liu, Yuqi Jiang, Qiuyue Gui, Deliang Ba, Yuanyuan Li and Jinping Liu

Chinese Chemical Letters, 2021, 32, 1299
DOI: 10.1016/j.cclet.2020.08.032

Fashioning all binary 3d transition metal oxides in the construction of dye-sensitized solar cells (DSSC) devices

Tahta Amrillah, Lalu Jihad Al Jazeera, Viona Maria Djojo, Dewi Sintawati Try Sutrisno, Natalia Imelda Wulan, Yusuf Akmal Agam, Muhammad Farhan Afif Mauludin, Albert Rafael and Yuliar Firdaus

Materials Science in Semiconductor Processing, 2025, 194, 109550
DOI: 10.1016/j.mssp.2025.109550

Microfluidic opportunities in printed electrolyte-gated transistor biosensors

Kevin D. Dorfman, Demetra Z. Adrahtas, Mathew S. Thomas and C. Daniel Frisbie

Biomicrofluidics, 2020, 14
DOI: 10.1063/1.5131365

Additive Manufacturing of 3D Aerogels and Porous Scaffolds: A Review

Halil Tetik, Ying Wang, Xiao Sun, Daxian Cao, Nasrullah Shah, Hongli Zhu, Fang Qian and Dong Lin

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202103410

Stable Gold Nanoparticle Colloids for Inkjet Printing Conductive Films

Md Tawabur Rahman, Jillian Cramer, Md Imran Noor, Paul F. Rottmann and Aron J. Huckaba

Surface & Interface Analysis, 2025, 57, 729
DOI: 10.1002/sia.70006

Printed Platinum Nanoparticle Thin-Film Structures for Use in Biology and Catalysis: Synthesis, Printing, and Application Demonstration

Annelies Sels and Vivek Subramanian

ACS Omega, 2023, 8, 1929
DOI: 10.1021/acsomega.2c04687

Surfactant-Tunable Nanoparticle Assembly via a Template-Directed Strategy

Xin Wang, Jimei Wu, Zhiguang Zhang and Guirong Xiong

Langmuir, 2023, 39, 5825
DOI: 10.1021/acs.langmuir.3c00116

Intelligent waveform estimation in piezoelectric inkjet printing for target droplet characteristics

Muhammad Ahsan Saleem, Xingzhi Xiao, Adeel Shehzad, Saqib Mamoon, Kianoush Haghsefat and Tingting Liu

Int J Interact Des Manuf, 2026
DOI: 10.1007/s12008-026-02503-x

Approaching the Practical Conductivity Limits of Aerosol Jet Printed Silver

Eva S. Rosker, Michael T. Barako, Evan Nguyen, Don DiMarzio, Kim Kisslinger, Dah-Weih Duan, Rajinder Sandhu, Mark S. Goorsky and Jesse Tice

ACS Appl. Mater. Interfaces, 2020
DOI: 10.1021/acsami.0c06959

Optimizing nanoparticles from the gas phase for dispersions and inks for printed electronics

Viktor Mackert, Julia S. Gebauer, Dimiter Tzolov, Jeldrik Schulte, Alice Sandmann and Markus Winterer

Powder Technology, 2026, 478, 122518
DOI: 10.1016/j.powtec.2026.122518

Effect of Oxalic Acid Treatment on Conductive Coatings Formed by Ni@Ag Core–Shell Nanoparticles

Anna Pajor-Świerzy, Radosław Pawłowski, Piotr Sobik, Alexander Kamyshny and Krzysztof Szczepanowicz

Materials, 2022, 15, 305
DOI: 10.3390/ma15010305

Electrofluidic displays based on inkjet printing and phase change filling

Yuanyuan Guo, Junfeng Yan, Zhenpeng Shen, Hongwei Jiang, Biao Tang, Yong Deng, Alex Henzen, Rui Zhou and Guofu Zhou

J. Micromech. Microeng., 2020, 30, 105001
DOI: 10.1088/1361-6439/ab9e50

Bubble‐pen lithography: Fundamentals and applications

Pavana Siddhartha Kollipara, Ritvik Mahendra, Jingang Li and Yuebing Zheng

Aggregate, 2022, 3
DOI: 10.1002/agt2.189

Inkjet-printed CMUT humidity sensors with high sensitivity and low hysteresis

Zhou Zheng, Naeun Kim, William S. Wong and John T.W. Yeow

Sensors and Actuators B: Chemical, 2021, 327, 128920
DOI: 10.1016/j.snb.2020.128920

Resistive Sensors for Smart Objects: Analysis on Printing Techniques

Paolo Bellitti, Michela Borghetti, Edoardo Cantu, Emilio Sardini and Mauro Serpelloni

IEEE Trans. Instrum. Meas., 2022, 71, 1
DOI: 10.1109/TIM.2022.3181941

Wearable Sweat Biosensors on Sports Analysis

Shilun Feng and Shengtai Bian

MatLab, 2022, 1
DOI: 10.54227/mlab.20220028

3D printing technologies for metasurface fabrication and applications of metasurfaces manufactured by 3D printing processes

Chunye Jiang, Manna Gu, Huizhen Feng, Ying Tian and Xufeng Jing

Journal of Applied Physics, 2026, 139
DOI: 10.1063/5.0302526

Preparation and Characterization of Ag2Se-based Ink Used for Inkjet Printing

Keyi ZHANG, Qi ZHENG, Lianjun WANG and Wan JIANG

Journal of Inorganic Materials, 2022, 37, 1109
DOI: 10.15541/jim20220030

Conductive Polymer‐Based Electronics in Additive Manufacturing: Materials, Processing, and Applications

Moyeen Khan, Md Faysal Ahamed Dewan Refati, Md Mostafizur Rahman Arup, Md. Aminul Islam, Md Hosne Mobarak and Chenggao Li

Advances in Polymer Technology, 2025, 2025
DOI: 10.1155/adv/4234491

Structural, microstructural, chemical, and optical properties of NiO nanocrystals and films obtained by 3D printing

S. Kakherskyi, R. Pshenychnyi, O. Dobrozhan, Ja. G. Vaziev, A. P. Bukivskii, P. M. Bukivskij, Yu. P. Gnatenko and A. Opanasyuk

Appl. Phys. A, 2021, 127
DOI: 10.1007/s00339-021-04847-5

Multisensors based on electrolyte-gated organic field-effect transistors (EGOFETs) with aptamers as recognition elements: current state of research

B. S. Kuleshov, E. G. Zavyalova, E. Yu. Poymanova, A. A. Abramov, S. A. Ponomarenko and E. V. Agina

RUSS CHEM REV, 2024, 93, RCR5116
DOI: 10.59761/RCR5116

Ultrashort laser sintering of metal nanoparticles: A review

Ayesha Sharif, Nazar Farid and Gerard M. O'Connor

Results in Engineering, 2022, 16, 100731
DOI: 10.1016/j.rineng.2022.100731

Hydrodynamic effects in maximum bubble pressure tensiometry

H. Salvador, H. Wijshoff, E.H. van Brummelen and A.A. Darhuber

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2026, 740, 140140
DOI: 10.1016/j.colsurfa.2026.140140

Solution-Processable and Eco-Friendly Functionalization of Conductive Silver Nanoparticles Inks for Printable Electronics

Sonia Ceron, David Barba and Miguel A. Dominguez

Electronic Materials, 2024, 5, 45
DOI: 10.3390/electronicmat5020004

Surface tailoring enables colloidal quantum dot: Metal-oxide nanocrystal hybrid ink for broadband photon energy conversion

Jae-Hwan Choi, Min-Jae Si, Sol-Hee Kim, Nipuni Maniyamgama, Dongeon Kim, Seungin Jee, Yun Hoo Kim, Hoon-Seok Jeong, Beomkwan Kim, Changjo Kim, Jung-Yong Lee and Se-Woong Baek

Applied Surface Science, 2023, 612, 155804
DOI: 10.1016/j.apsusc.2022.155804

Tuning hydroxyl-functionalized ligands in silver MOD inks for high-conductivity films and aerosol-jet-printed flexible UWB antennas

Wendong Yang, Lei Mei, Xiangyu Yan and Yufei Ma

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2026, 738, 140016
DOI: 10.1016/j.colsurfa.2026.140016

A Simple Three-Step Method for the Synthesis of Submicron Gold Particles: The Influence of Laser Irradiation Duration, Pulse Energy, Laser Pulse Duration, and Initial Concentration of Nanoparticles in the Colloid

Ilya V. Baimler, Ivan A. Popov, Alexander V. Simakin and Sergey V. Gudkov

Nanomaterials, 2026, 16, 79
DOI: 10.3390/nano16020079

Photoinduced Flexible Graphene/Polymer Nanocomposites: Design, Formation Mechanism, and Properties Engineering

Anna Lipovka, Ilia Petrov, Maxim Fatkullin, Gennadiy Murastov, Alexey Ivanov, Nelson E. Villa, Sergey Schadenko, Andrey Averkiev, Anna Chernova, Fedor Gubarev, Muhammad Saqib, Wenbo Sheng, Jin-Ju Chen, Olfa Kanoun, Ihsan Amin, Raul D. D. Rodriguez and Evgeniya Sheremet

SSRN Journal, 2021
DOI: 10.2139/ssrn.3986215

Electrically Conductive 2D Material Coatings for Flexible and Stretchable Electronics: A Comparative Review of Graphenes and MXenes

Vicente Orts Mercadillo, Kai Chio Chan, Mario Caironi, Athanassia Athanassiou, Ian A. Kinloch, Mark Bissett and Pietro Cataldi

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202204772

Systematic assessment of the biocompatibility of materials for inkjet-printed ozone sensors for medical therapy

Lisa Petani, Valerie Wehrheim, Liane Koker, Markus Reischl, Martin Ungerer, Ulrich Gengenbach and Christian Pylatiuk

Flex. Print. Electron., 2021, 6, 043003
DOI: 10.1088/2058-8585/ac32ab

Inkjet-printed MoS2-based field-effect transistors with graphene and hexagonal boron nitride inks

Ridwan F. Hossain and Anupama B. Kaul

Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 2020, 38
DOI: 10.1116/6.0000082

Atmospheric Pressure Plasma Jet Printing for Printed and Flexible Electronics

M. Meyyappan

IEEE Electron Devices Rev., 2025, 2, 98
DOI: 10.1109/EDR.2025.3566007

Challenges, Prospects, and Emerging Applications of Inkjet‐Printed Electronics: A Chemist's Point of View

Justin Lemarchand, Nathalie Bridonneau, Nicolas Battaglini, Florent Carn, Giorgio Mattana, Benoit Piro, Samia Zrig and Vincent Noël

Angew Chem Int Ed, 2022, 61
DOI: 10.1002/anie.202200166

Flexible organic field-effect transistors-based biosensors: progress and perspectives

Xingguo Zhang, Zhihua Pu, Xiao Su, Chengcheng Li, Hao Zheng and Dachao Li

Anal Bioanal Chem, 2023, 415, 1607
DOI: 10.1007/s00216-023-04553-6

RETRACTED: Structural properties and chemical composition of ZnO films deposited onto flexible substrates by spraying polyol mediated nanoinks

О. Dobrozhan, S. Vorobiov, D. Kurbatov, М. Baláž, М. Kolesnyk, О. Diachenko, V. Komanicky and А. Opanasyuk

Superlattices and Microstructures, 2020, 140, 106455
DOI: 10.1016/j.spmi.2020.106455

Low-Temperature Self-Stacking Ink for Electrohydrodynamic Direct Writing

Xianruo Du, Yisheng Zhong, Guoyi Kang, Jiaxin Jiang, Xiang Wang, Wenwang Li and Gaofeng Zheng

ACS Appl. Polym. Mater., 2023, 5, 5314
DOI: 10.1021/acsapm.3c00723

Printed Memristors: An Overview of Ink, Materials, Deposition Techniques, and Applications

Miguel Franco, Asal Kiazadeh, Rodrigo Martins, Senentxu Lanceros‐Méndez and Emanuel Carlos

Adv Elect Materials, 2024, 10
DOI: 10.1002/aelm.202400212

Evolution of 2D materials conducive to the wearable physical sensors for structural health assessment

Suresh Kumar Chittibabu and Krishnamoorthi Chintagumpala

Microelectronic Engineering, 2023, 276, 112013
DOI: 10.1016/j.mee.2023.112013

Nanosilver Inkjet-Printed CPW-Fed Flexible Antenna Sensor for Contactless Liquid Acetone/Water Detection

Kabir Hossain, Yu Dang and Michael Cheffena

IEEE Sensors J., 2024, 24, 9933
DOI: 10.1109/JSEN.2024.3361911

Nanoparticles in printed photovoltaics: Materials, methods and potential

Haoran Zhang, Lukas Mielke, Dmitrii Sychev, Ningwei Sun, Ilka Hermes, Hendrik Schlicke and Franziska S.-C. Lissel

Materials Today Energy, 2025, 54, 102054
DOI: 10.1016/j.mtener.2025.102054

A precise method of color space conversion in the digital printing process based on PSO-DBN

Zebin Su, Jinkai Yang, Pengfei Li, Junfeng Jing and Huanhuan Zhang

Textile Research Journal, 2022, 92, 1673
DOI: 10.1177/00405175211067287

Additive Manufacturable Materials for Electrochemical Biosensor Electrodes

Moe Elbadawi, Jun Jie Ong, Thomas D. Pollard, Simon Gaisford and Abdul W. Basit

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202006407

Inkjet printing P(VDF-TrFE-CTFE) actuators for large bending strains

S A Sekar and A Hunt

Smart Mater. Struct., 2024, 33, 025036
DOI: 10.1088/1361-665X/ad1df0

Inkjet printing of triethylene glycol monomethyl ether (TEGMME)-based ink droplet on oxygen plasma treated PDMS substrate for flexible circuit

Yunfan Zhang, Beikang Gu, Wuyang Tang, Zifan Xue, Shengnan Shen and Hui Li

Surfaces and Interfaces, 2024, 48, 104356
DOI: 10.1016/j.surfin.2024.104356

Donor-acceptor polymeric inks with transition-metal dichalcogenide nanosheet suspensions for inkjet-printed thin-film transistors

Hyunwoo Choi, Wontae Park and William Wong

Organic Electronics, 2024, 125, 106980
DOI: 10.1016/j.orgel.2023.106980

Formulation of Nickel Oxide–Graphene Composite Ink and the Fabrication of Thin-Film Electrodes Using Direct Ink Writing

Neha Thakur, Neethu Thomas, Aarju Mathew Koshy, Parasuraman Swaminathan and Hari Murthy

J. Electron. Mater., 2024, 53, 2573
DOI: 10.1007/s11664-024-10984-3

Porous MgCo2O4 nanoflakes serve as electrode materials for hybrid supercapacitors with excellent performance

Enhui Bao, Xianglin Ren, Runze Wu, Xiaohong Liu, Huiyu Chen, Yi Li and Chunju Xu

Journal of Colloid and Interface Science, 2022, 625, 925
DOI: 10.1016/j.jcis.2022.06.098

Printed hybrid capacitive Kirigami sensor: enhancing flexibility and conformability for improved motion artifacts

Laura Morelli, Arjun Wadhwa, Sylvain Cloutier, Martin Bolduc, Ghyslain Gagnon and Ricardo J Zednik

Flex. Print. Electron., 2024, 9, 045012
DOI: 10.1088/2058-8585/ad9ec0

THE PREPARATION OF NANOPARTICLE FILMS BASED ON LIGHT WELDING TECHNOLOGY

Ming Sun, Yanyun Li, Shu Qian and Xin Chen

Nano Sci Technol Int J, 2024, 15, 79
DOI: 10.1615/NanoSciTechnolIntJ.2024049728

Towards mass-production of ion-selective electrodes by spotting: Optimization of membrane composition and real-time tracking of membrane drying

Sara Krivačić, Ayian Speck, Petar Kassal and Eric Bakker

Sensors and Actuators B: Chemical, 2025, 423, 136759
DOI: 10.1016/j.snb.2024.136759

Electrostatically Driven Vertical Combinatorial Patterning of Colloidal Nano-Objects

Gaëtan Petit, Romain Hernandez, Simon Raffy, Aurélien Cuche, Lorena Soria Marina, Michele D’Amico, Etienne Palleau and Laurence Ressier

Colloids and Interfaces, 2023, 7, 6
DOI: 10.3390/colloids7010006

An overview of fused filament fabrication technology and the advancement in PLA-biocomposites

Mahendran Samykano, Rajan Kumaresan, Jeevendran Kananathan, Kumaran Kadirgama and Adarsh Kumar Pandey

Int J Adv Manuf Technol, 2024, 132, 27
DOI: 10.1007/s00170-024-13394-1

Advancements and challenges in printed thermoelectrics

Huangshui Ma, Ting Lu, Xiao-Lei Shi, Meng Li, Siqi Huo, Pingan Song, Zhi-Gang Chen and Min Hong

Progress in Materials Science, 2026, 158, 101619
DOI: 10.1016/j.pmatsci.2025.101619

Large-Scale Synthesis of Hybrid Conductive Polymer–Gold Nanoparticles Using “Sacrificial” Weakly Binding Ligands for Printing Electronics

Alberto Escudero, Lola González-García, Robert Strahl, Dong Jin Kang, Juraj Drzic and Tobias Kraus

Inorg. Chem., 2021, 60, 17103
DOI: 10.1021/acs.inorgchem.1c02350

Inkjet printing of Pd/SO3H-modified graphene on different polymeric substrates to construct flexible electrochemical sensors

Merve Dilsen, Hasan H. Ipekci and Aytekin Uzunoglu

Journal of Materials Research, 2023, 38, 3572
DOI: 10.1557/s43578-023-01086-7

Magnesium Nanoparticle Synthesis from Powders via Pulsed Laser Ablation in Liquid for Nanocolloid Production

Anesu Nyabadza, Mercedes Vázquez, Shirley Coyle, Brian Fitzpatrick and Dermot Brabazon

Applied Sciences, 2021, 11, 10974
DOI: 10.3390/app112210974

Printable Single‐Ion Polymer Nanoparticle Electrolytes for Lithium Batteries

Antonela Gallastegui, Rafael Del Olmo, Miryam Criado‐Gonzalez, Jose Ramon Leiza, Maria Forsyth and David Mecerreyes

Small Science, 2024, 4
DOI: 10.1002/smsc.202300235

Comparing low-temperature thermal and plasma sintering processes of a tailored silver particle-free ink

Wendong Yang, Felix Hermerschmidt, Florian Mathies and Emil J. W. List-Kratochvil

J Mater Sci: Mater Electron, 2021, 32, 6312
DOI: 10.1007/s10854-021-05347-1

Fused deposition modeling: process, materials, parameters, properties, and applications

Kumaresan Rajan, Mahendran Samykano, Kumaran Kadirgama, Wan Sharuzi Wan Harun and Md. Mustafizur Rahman

Int J Adv Manuf Technol, 2022, 120, 1531
DOI: 10.1007/s00170-022-08860-7

Organic Transistor Integrated Circuits by Digital Printing

Hiroyuki MATSUI

Journal of The Surface Finishing Society of Japan, 2024, 75, 372
DOI: 10.4139/sfj.75.372

Printed Stretchable Single-Nanofiber Interconnections for Individually-Addressable Highly-Integrated Transparent Stretchable Field Effect Transistor Array

Dong Wook Kim, Jihye Kwon, Hyoung Seop Kim and Unyong Jeong

Nano Lett., 2021, 21, 5819
DOI: 10.1021/acs.nanolett.1c01744

Transitions in intra-droplet flow and wetting governing nanoparticle deposition patterns in inkjet-printed nanofluids

Eita Shoji, Taiga Saito, Tetsushi Biwa, Masaki Kubo, Takao Tsukada, Takaaki Tomai and Tadafumi Adschiri

Journal of Colloid and Interface Science, 2025, 699, 138246
DOI: 10.1016/j.jcis.2025.138246

Inkjet printed acrylate-urethane modified poly(3,4-ethylenedioxythiophene) flexible conductive films

Lucija Fiket, Marin Božičević, Patricia Žagar, Dražan Jozić and Zvonimir Katančić

Pure and Applied Chemistry, 2024, 96, 533
DOI: 10.1515/pac-2023-1020

Challenges, Prospects, and Emerging Applications of Inkjet‐Printed Electronics: A Chemist's Point of View

Justin Lemarchand, Nathalie Bridonneau, Nicolas Battaglini, Florent Carn, Giorgio Mattana, Benoit Piro, Samia Zrig and Vincent Noël

Angewandte Chemie, 2022, 134
DOI: 10.1002/ange.202200166

Smart biosensors and intelligent devices for salivary biomarker detection

Xufeng Zheng, Fanrou Zhang, Kun Wang, Wei Zhang, Yige Li, Yue Sun, Xiaolin Sun, Chunyan Li, Biao Dong, Lin Wang and Lin Xu

TrAC Trends in Analytical Chemistry, 2021, 140, 116281
DOI: 10.1016/j.trac.2021.116281

Fabricating of double layered flexible pressure sensor with a high-sensitivity based on inkjet printed micro-concave structure

Mengdi Ma, Rui Sun, Sen Li, Haiting Kang, Shuo Wang, Fuqiang Chu and Jiazhen Sun

Sensors and Actuators A: Physical, 2023, 351, 114161
DOI: 10.1016/j.sna.2023.114161

Controlling post-impact dynamics of ferrofluid droplets with magnetic field

Jin-Xiang Zhou, Hong-Wei Xiao, Ya-Ping Wang, Adnan Khan, Xiao-Dong Niu, Ming-Fu Wen, Mu-Feng Chen, De-Cai Li and Hiroshi Yamaguchi

Physics of Fluids, 2022, 34
DOI: 10.1063/5.0128207

Electrohydrodynamic printing for high resolution patterning of flexible electronics toward industrial applications

Zhouping Yin, Dazhi Wang, Yunlong Guo, Zhiyuan Zhao, Liqiang Li, Wei Chen and Yongqing Duan

InfoMat, 2024, 6
DOI: 10.1002/inf2.12505

Simple Controlling Ecofriendly Synthesis of Silver Nanoparticles at Room Temperature Using Lemon Juice Extract and Commercial Rice Vinegar

T. Lan Anh Luu, X. Truong Cao, V. Thai Nguyen, N. Linh Pham, H. Lam Nguyen and C. Tu Nguyen

Journal of Nanotechnology, 2020, 2020, 1
DOI: 10.1155/2020/3539701

Dendrimer stabilized nanoalloys for inkjet printing of surface-enhanced Raman scattering substrates

Tiago Fernandes, Natércia C.T. Martins, Sara Fateixa, Helena I.S. Nogueira, Ana L. Daniel-da-Silva and Tito Trindade

Journal of Colloid and Interface Science, 2022, 612, 342
DOI: 10.1016/j.jcis.2021.12.167

Biocompatible organic electrochemical transistor on polymeric scaffold for wound healing monitoring

Aida Cavallo, Paola Losi, Marianna Buscemi, Tamer Al Kayal, Matteo Beccatelli, Giorgio Soldani and Nicola Coppedè

Flex. Print. Electron., 2022, 7, 035009
DOI: 10.1088/2058-8585/ac84ec

Heterometallic Seed‐Mediated Zinc Deposition on Inkjet Printed Silver Nanoparticles Toward Foldable and Heat‐Resistant Zinc Batteries

Tao Chen, Yinan Wang, Yi Yang, Fei Huang, Mingke Zhu, Barbara Ting Wei Ang and Jun Min Xue

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202101607

Enhancing the Surface Hydrophilicity of an Aluminum Alloy Using Two-Step Anodizing and the Effect on Inkjet Printing Characteristics

Youngyoon Kim and Wook-Bae Kim

Coatings, 2023, 13, 232
DOI: 10.3390/coatings13020232

Silver Nanoparticles for Conductive Inks: From Synthesis and Ink Formulation to Their Use in Printing Technologies

Junhui Zhang, Maziar Ahmadi, Gemma Fargas, Nikola Perinka, Javier Reguera, Senentxu Lanceros-Méndez, Luis Llanes and Emilio Jiménez-Piqué

Metals, 2022, 12, 234
DOI: 10.3390/met12020234

Paper-based thermoelectric generators for viable waste heat harvesting

Surajit Das, Bhargab Prasad Mondal and Anuja Datta

J. Phys. D: Appl. Phys., 2025, 58, 043002
DOI: 10.1088/1361-6463/ad8660

Drug-Loaded Lipid-Core Micelles in Mucoadhesive Films as a Novel Dosage Form for Buccal Administration of Poorly Water-Soluble and Biological Drugs

Wai-Houng Chou, Ariel Galaz, Miguel O. Jara, Alexander Gamboa and Javier O. Morales

Pharmaceutics, 2020, 12, 1168
DOI: 10.3390/pharmaceutics12121168

A Comprehensive Guide to Fully Inkjet‐Printed IGZO Transistors

Lorenzo Magnarin, Ben Breitung and Jasmin Aghassi‐Hagmann

Adv Elect Materials, 2025, 11
DOI: 10.1002/aelm.202400478

Photo-responsive anticounterfeiting inks switching between colorless and cyan/magenta/yellow for flexible, full-color, and large-area printing

Fan Zhou, Hao Zong, Yujie Xie, Zhanglang Zhou, Zeying Guo and Gang Zhou

Chemical Engineering Journal, 2024, 496, 153834
DOI: 10.1016/j.cej.2024.153834

Fluid drawing printing 3D conductive structures for flexible circuit manufacturing

Yikang Li, Dazhi Wang, Yiwen Feng, Xiangji Chen, Xu Chen, Chang Liu, Yanteng Li, Liujia Suo, Ran Zhang, Xiaopeng Zhang, Ben Liu, Fengshu Wang, Shiwen Liang, Lingjie Kong, Qiang Fu, Tongqun Ren and Tiesheng Wang

Microsyst Nanoeng, 2025, 11
DOI: 10.1038/s41378-025-00936-0

Processes and materials used for direct writing technologies: A review

Shahriar Bakrani Balani, Seyed Hamidreza Ghaffar, Mehdi Chougan, Eujin Pei and Erdem Şahin

Results in Engineering, 2021, 11, 100257
DOI: 10.1016/j.rineng.2021.100257

Sintering mechanism of size-controllable Cu-Ag core–shell nanoparticles for flexible conductive film with high conductivity, antioxidation, and electrochemical migration resistance

Wenwu Zhang, Yanhong Zhou, Yiping Ding, Linlin Song, Qunhui Yuan, Weiwei Zhao, Chengyan Xu, Jun Wei, Mingyu Li and Hongjun Ji

Applied Surface Science, 2022, 586, 152691
DOI: 10.1016/j.apsusc.2022.152691

Electrohydrodynamic Direct‐Writing Fabrication of Microstructure‐Enhanced Microelectrode Arrays for Customized and Curved Physiological Electronics

Wuhao Zou, Haibo Yu, Xiaofeng Lv, Peilin Zhou, Hongji Guo, Ya Zhong and Lianqing Liu

Adv Materials Inter, 2022, 9
DOI: 10.1002/admi.202201197

Multiscale Transfer Printing via Shape Memory Polymer with High Adhesion and Modulus Switchability

Fu Fan, Lei Chen, Yu Zhou and Huigao Duan

ACS Appl. Mater. Interfaces, 2024, 16, 26824
DOI: 10.1021/acsami.4c05828

Infinite Approaching Superlubricity by Three-Dimensional Printed Structures

Yu Zhao, Hui Mei, Peng Chang, Chao Chen, Laifei Cheng and Konstantinos G. Dassios

ACS Nano, 2021, 15, 240
DOI: 10.1021/acsnano.0c08713

Nanostructural engineering of porous perovskite cathodes for high-performance protonic ceramic fuel-cells using piezoelectric inkjet-printing

Wanhyuk Chang, Kyung Ho Oh, Sung Min Kang, Jun Sung Hwang, Kyung Chan Min and Joon Hyung Shim

Additive Manufacturing, 2025, 97, 104606
DOI: 10.1016/j.addma.2024.104606

Highly conductive porous coatings based on gold organosols stabilized with the non-ionic biodegradable surfactant Ecosurf SA4

Pavel S. Popovetskiy, Victoria S. Chubar and Veronica S. Sulyaeva

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2025, 726, 138109
DOI: 10.1016/j.colsurfa.2025.138109

3D inkjet-printing of photo-crosslinkable resins for microlens fabrication

Rishabh Magazine, Bas van Bochove, Sedigheh Borandeh and Jukka Seppälä

Additive Manufacturing, 2022, 50, 102534
DOI: 10.1016/j.addma.2021.102534

Fabrication Technologies of Flexible Transparent Electrodes for Supercapacitors: Recent Advances and Perspectives

Feifei Lin, Pin Yang, Qixiang Wang, Yijie Zhang, Weikang Wang, Shujuan Liu, Weiwei Zhao and Qiang Zhao

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300972

Recent advances in printed devices for next-generation sensing

Md. Omarsany Bappy, Kaidong Song and Yanliang Zhang

APL Electronic Devices, 2025, 1
DOI: 10.1063/5.0264012

A review on nanomaterial-based additive manufacturing: dynamics in properties, prospects, and challenges

Mustafijur Rahman, Kazi Sirajul Islam, Tanvir Mahady Dip, Mohammed Farhad Mahmud Chowdhury, Smita Rani Debnath, Shah Md. Maruf Hasan, Md. Sadman Sakib, Tanushree Saha, Rajiv Padhye and Shadi Houshyar

Prog Addit Manuf, 2024, 9, 1197
DOI: 10.1007/s40964-023-00514-8

Advances on Emerging Materials for Flexible Supercapacitors: Current Trends and Beyond

Mercy R. Benzigar, Venkata D. B. C. Dasireddy, Xinwei Guan, Tom Wu and Guozhen Liu

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.202002993

Water-Based Additive-Free Chromic Inks for Printing of Flexible Photochromics and Electrochromics

Fan Zhou, Dingli Liang, Si Liu, Zeying Guo, Min Wang and Gang Zhou

ACS Appl. Mater. Interfaces, 2023, 15, 49418
DOI: 10.1021/acsami.3c09595

Flexible inkjet-printed lithium-ion batteries with Ti3C2T current collector

Prisca Viviani, Eugenio Gibertini, Paolo Fontana, Federico Lissandrello, Yury Gogotsi and Luca Magagnin

Journal of Power Sources, 2024, 601, 234287
DOI: 10.1016/j.jpowsour.2024.234287

Direct visualization of nanoparticle morphology in thermally sintered nanoparticle ink traces and the relationship among nanoparticle morphology, incomplete polymer removal, and trace conductivity

Ghansham Rajendrasingh Chandel, Jiayue Sun, Sai Ankit Etha, Beihan Zhao, Vishal Sankar Sivasankar, Shakiba Nikfarjam, Mei Wang, Daniel R Hines, Abhijit Dasgupta, Taylor Woehl and Siddhartha Das

Nanotechnology, 2023, 34, 365705
DOI: 10.1088/1361-6528/acd9d2

An inkjet-printable fluorescent thermal sensor based on CdSe/ZnS quantum dots immobilised in a silicone matrix

L. Birchall, A. Foerster, G.A. Rance, A. Terry, R.D. Wildman and C.J. Tuck

Sensors and Actuators A: Physical, 2022, 347, 113977
DOI: 10.1016/j.sna.2022.113977

Engineering Aggregation‐Resistant MXene Nanosheets As Highly Conductive and Stable Inks for All‐Printed Electronics

Xiaowu Tang, G. Murali, Hyungjin Lee, Seongmin Park, Seongeun Lee, Sun Moo Oh, Jihoon Lee, Tae Yun Ko, Chong Min Koo, Yong Jin Jeong, Tae Kyu An, Insik In and Se Hyun Kim

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202010897

All-redox solid-state supercapacitor with cobalt manganese oxide@bimetallic hydroxides and vanadium nitride@nitrogen-doped carbon electrodes

Pragati A. Shinde, Nilesh R. Chodankar, Suchan Lee, Euigeol Jung, Sikandar Aftab, Young-Kyu Han and Seong Chan Jun

Chemical Engineering Journal, 2021, 405, 127029
DOI: 10.1016/j.cej.2020.127029

Facile method for printing reliable sliver patterns on polymer film

Shaowei Hu, Wenbo Zhu, Wanchun Yang, Hongjun Ji and Mingyu Li

Materials Letters, 2022, 314, 131551
DOI: 10.1016/j.matlet.2021.131551

Ink synthesis and inkjet printing of manganese electrodes on laser textured aluminium foil: The effect of laser texturing parameters on surface roughness and printability

Anesu Nyabadza, Suman Chatterjee, Suganya Pitchai Muthusamy, Sean Ryan, Jesus Inocente Medina Santos, Valeria Nicolosi, Dermot Brabazon and Mercedes Vazquez

Journal of Materials Research and Technology, 2025, 37, 4514
DOI: 10.1016/j.jmrt.2025.07.120

Integration of Surface-Mount Devices in Microsystems Using Tracks Consisting of Nanoparticles

Tina Mitteramskogler, Andreas Fuchsluger, Rafael Ecker, Sebastian Lang, Thomas Wilfinger, Robert Wille and Bernhard Jakoby

IEEE Sens. Lett., 2024, 8, 1
DOI: 10.1109/LSENS.2024.3460969

Promising New Horizons in Medicine: Medical Advancements with Nanocomposite Manufacturing via 3D Printing

Nan Li, Sadaf Bashir Khan, Shenggui Chen, Wurikaixi Aiyiti, Jianping Zhou and Bingheng Lu

Polymers, 2023, 15, 4122
DOI: 10.3390/polym15204122

Cost-effective and self-reducible Cu-Ni composite ink for low temperature fabrication of highly conductive and anti-oxidative electrodes

Yun Mou, Yang Peng, Jiuzhou Zhao, Qing Wang and Mingxiang Chen

Materials Letters, 2022, 328, 133134
DOI: 10.1016/j.matlet.2022.133134

Redshift phenomenon in the electroluminescence spectrum of nanodot matrix OLEDs

Wei Zhao, Jian-wu Zhang, Yin You, Jin-hui Song, Ao Zhang, Xu Li and Bo Song

Polymer, 2026, 347, 129686
DOI: 10.1016/j.polymer.2026.129686

Printability and electrical conductivity of silver nanoparticle-based conductive inks for inkjet printing

Y. H. Wang, D. X. Du, H. Xie, X. B. Zhang, K. W. Lin, K. Wang and E. Fu

J Mater Sci: Mater Electron, 2021, 32, 496
DOI: 10.1007/s10854-020-04828-z

Laser fabrication of fully printed graphene oxide microsensor

Xingsheng Wang, Jian Zhang, Xinliang Mei, Bin Xu and Jieliang Miao

Optics and Lasers in Engineering, 2021, 140, 106520
DOI: 10.1016/j.optlaseng.2020.106520

Ohmic contact formation for inkjet-printed nanoparticle copper inks on highly doped GaAs

Nastaran Hayati-Roodbari, Alexander Wheeldon, Carina Hendler, Alexander Fian and Roman Trattnig

Nanotechnology, 2021, 32, 225205
DOI: 10.1088/1361-6528/abe902

On-Substrate Joule Effect Heating by Printed Micro-Heater for the Preparation of ZnO Semiconductor Thin Film

Van-Thai Tran, Yuefan Wei and Hejun Du

Micromachines, 2020, 11, 490
DOI: 10.3390/mi11050490

Developing pressure sensors from impregnated textile sandwiched in inkjet-printed electrodes

Saleem Khan, Shawkat Ali, Arshad Khan and Amine Bermak

J Mater Sci: Mater Electron, 2022, 33, 541
DOI: 10.1007/s10854-021-07325-z

Inkjet printing of silver conductive ink on textiles for wearable electronic applications

A. Boumegnane, A. Nadi, O. Cherkaoui and M. Tahiri

Materials Today: Proceedings, 2022, 58, 1235
DOI: 10.1016/j.matpr.2022.01.469

3D printing of microwave materials, components and their applications – A review

Ravina R. Holkar, Govind G. Umarji, Manish D. Shinde and Sunit B. Rane

Journal of Manufacturing Processes, 2025, 137, 280
DOI: 10.1016/j.jmapro.2025.02.006

Hierarchical ZnCo2O4-ZnO/ZnCo2O4 core-shell microarchitecture as pseudocapacitive material with ultra-high rate capability and enhanced cyclic stability for asymmetric supercapacitors

Baole Li, Ke Zhang, Shaopeng Qi, Yanmei Guo, Jinxi Chen and Yongbing Lou

Applied Surface Science, 2022, 592, 153202
DOI: 10.1016/j.apsusc.2022.153202

Gold Inks for Inkjet Printing on Photo Paper: Complementary Characterisation

Hanuma Reddy Tiyyagura, Peter Majerič, Matej Bračič, Ivan Anžel and Rebeka Rudolf

Nanomaterials, 2021, 11, 599
DOI: 10.3390/nano11030599

Layout-to-Bitmap Conversion and Design Rules for Inkjet-Printed Large-Scale Integrated Circuits

Jimin Kwon, Sanghoon Baek, Yongwoo Lee, Shizuo Tokito and Sungjune Jung

Langmuir, 2021, 37, 10692
DOI: 10.1021/acs.langmuir.1c01296

2D materials inks toward smart flexible electronics

Oyawale Adetunji Moses, Libo Gao, Haitao Zhao, Zhuo Wang, Mukhtar Lawan Adam, Zhehao Sun, Kaili Liu, Jiahong Wang, Yang Lu, Zongyou Yin and Xuefeng Yu

Materials Today, 2021, 50, 116
DOI: 10.1016/j.mattod.2021.08.010

Scalable Fabrication of Black Phosphorous Films for Infrared Photodetector Arrays

Alexander Corletto, Purevlkham Myagmarsereejid, Shifan Wang, Wei Yan, Sivacarendran Balendhran, Huan Liu, Yu Lin Zhong, Kenneth B. Crozier, Munkhbayar Batmunkh and James Bullock

Advanced Science, 2024, 11
DOI: 10.1002/advs.202403182

Electrohydrodynamic Jet-Printed MAPbBr3 Perovskite/Polyacrylonitrile Nanostructures for Water-Stable, Flexible, and Transparent Displays

Giho Kang, Hyungdong Lee, Joonkyeong Moon, Hyung-Seok Jang, Dae-Hyun Cho and Doyoung Byun

ACS Appl. Nano Mater., 2022, 5, 6726
DOI: 10.1021/acsanm.2c00753

Planar Microwave Sensors: State of the Art and Applications

Carlos G. Juan, Katia Grenier, Mohammad H. Zarifi, Amir Ebrahimi and Ferran Martin

IEEE Access, 2025, 13, 143985
DOI: 10.1109/ACCESS.2025.3599112

Inkjet assisted manufacturing of untethered magnetic devices: A comparison between three routes to pattern artificial water striders

Karolina Kołczyk-Siedlecka, Roberto Bernasconi, Piotr R. Zabinski and Luca Magagnin

J Solid State Electrochem, 2025, 29, 1477
DOI: 10.1007/s10008-024-06093-0

Ink-based disposable electrodes: Versatile analytical platforms for point-of-need applications

Gilberto José Silva Junior, Rodrigo Marcelo Ramos, William Barros Veloso, Lauro Antonio Pradela Filho and Thiago Regis Longo Cesar da Paixão

Euchembioj Rev., 2025, 2, e26002
DOI: 10.62063/rev-28

Fabrication of Extremely Concentrated Silver Hydrosols without Additional Stabilizers

Sergey A. Vorobyev, Maxim N. Likhatski, Alexander S. Romanchenko, Olga Y. Fetisova, Alexander S. Kazachenko, Mikhail N. Volochaev and Yuri L. Mikhlin

ACS Sustainable Chem. Eng., 2020, 8, 17225
DOI: 10.1021/acssuschemeng.0c06006

Aerosol‐Jet Printed Sensors for Environmental, Safety, and Health Monitoring: A Review

Christine Fisher, Lydia N. Skolrood, Kai Li, Pooran C. Joshi and Tolga Aytug

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300030

Inkjet printing of highly dispersed, shortened, and defect-rich MWCNTs to construct flexible electrochemical sensors for the detection of bisphenol A in milk samples

Sumeyye Sarıkaya, Hasan Huseyin Ipekci, Hasan Kotan and Aytekin Uzunoglu

Carbon, 2023, 214, 118362
DOI: 10.1016/j.carbon.2023.118362

Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications

Shuyue Wang, Xiaoli Wu, Jiaxin Lu, Zhengwu Luo, Hui Xie, Xiaobin Zhang, Kaiwen Lin and Yuehui Wang

Nanomaterials, 2022, 12, 842
DOI: 10.3390/nano12050842

Bubble Printing of Anisotropic Clay Nanotubes

Claire Hotton, Erwan Paineau and Eric H. Hill

Advanced Optical Materials, 2025, 13
DOI: 10.1002/adom.202500373

Intrinsic Field-Induced Nanoparticle Assembly in Three-Dimensional (3D) Printing Polymeric Composites

Dharneedar Ravichandran, Weiheng Xu, Sayli Jambhulkar, Yuxiang Zhu, Mounika Kakarla, Mohammed Bawareth and Kenan Song

ACS Appl. Mater. Interfaces, 2021, 13, 52274
DOI: 10.1021/acsami.1c12763

Advancements in 2D transition metal dichalcogenides (TMDs) inks for printed optoelectronics: A comprehensive review

Iqra Shahbaz, Muhammad Tahir, Lihong Li and Yanlin Song

Materials Today, 2024, 77, 142
DOI: 10.1016/j.mattod.2024.06.008

Unveiling the deposition mechanism of ultra-thin graphene oxide flakes in an aqueous colloidal phase

Jeonghan Kim, Seonha Park, Mingi Choi, Habeom Lee and Songkil Kim

Applied Surface Science, 2025, 713, 164307
DOI: 10.1016/j.apsusc.2025.164307

Instant Postsynthesis Aqueous Dispersion of Sb-Doped SnO2 Nanocrystals: The Synergy between Small-Molecule Amine and Sb Dopant Ratio

Zhangxian Chen, Qiannan Xie, Juxuan Ding, Zeheng Yang, Weixin Zhang and Hansong Cheng

ACS Appl. Mater. Interfaces, 2020
DOI: 10.1021/acsami.0c04494

Low-cost inkjet-printed t-type coplanar waveguide sensor for high-dielectric liquid sensing applications

Arshad Hassan, Shawkat Ali, Arshad Khan and Amine Bermak

Analog Integr Circ Sig Process, 2026, 126
DOI: 10.1007/s10470-026-02559-5

3D Assembly of Graphene Nanomaterials for Advanced Electronics

Hortense Le Ferrand, Sakineh Chabi and Shweta Agarwala

Advanced Intelligent Systems, 2020, 2
DOI: 10.1002/aisy.201900151

Photon‐Pen Writing for Metal Oxide‐Based Versatile Nanosensors

Garam Bae, Minji Kim, Moonjeong Jang, Yeong Min Kwon, Soonmin Yim, Wooseok Song, Sung Myung, Sun Sook Lee, Tawfique Hasan and Ki‐Seok An

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202204821

Inkjet printing of perovskite ceramics for high-performance proton ceramic fuel cells

Wanhyuk Chang, Eun Heui Kang, Heon Jun Jeong, Wonjoon Choi and Joon Hyung Shim

Energy, 2023, 268, 126489
DOI: 10.1016/j.energy.2022.126489

Recent Progresses in Direct Photolithographic Patterning of Quantum Dots

Yifei Liu, Jiayuan Li, Siting Cai, Tingzhu Wu, Zhong Chen, Yue Lin and Shuli Wang

ACS Photonics, 2025, 12, 5849
DOI: 10.1021/acsphotonics.5c01692

High‐Performance Direct Ink Writing of PEDOT:PSS‐Based Conductive Inks for Flexible Electronics

Yazhou Sun, Ruixuan Wang, Mingxuan Xu, Lu Yang, Haitao Liu and Xiaoquan Shi

Polymers for Advanced Techs, 2026, 37
DOI: 10.1002/pat.70583

Inkjet-printed electronics for rapid and low-cost prototyping of digital microfluidic devices using an off-the-shelf printer

Babak Kamali Doust Azad, Amirhossein Roozbahani, Seyed Mohammad Tabatabaei, Amirali Valinejad, Alireza Fazelian, Kimia Shahmoradi, Fatemeh Khatami, Seyed Mohammad Kazem Aghamir and Mohammadreza Kolahdouz

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-89343-z

Reversible Conductive Inkjet Printing of Healable and Recyclable Electrodes on Cardboard and Paper

Dong Jin Kang, Yvonne Jüttke, Lola González‐García, Alberto Escudero, Marcel Haft and Tobias Kraus

Small, 2020, 16
DOI: 10.1002/smll.202000928

Recent progress in non-photolithographic patterning of polymer thin films

Mingjun Qiu, Weiwei Du, Shangyu Zhou, Pengzhe Cai, Yingwu Luo, Xiaoxue Wang, Rong Yang and Junjie Zhao

Progress in Polymer Science, 2023, 142, 101688
DOI: 10.1016/j.progpolymsci.2023.101688

From colloidal nanoparticles in non-polar solvents to 3D microstructures: a new paradigm in Convective Self-Assembly

Giuseppe Boniello, Priyanka Tyagi, Shagun Maurya and Laurence Ressier

Journal of Colloid and Interface Science, 2026, 704, 139300
DOI: 10.1016/j.jcis.2025.139300

Ligand‐Engineered Cu@Ni Core‐Shell Nanoparticles with Excellent Performance for Printed Electronics

Xiuqi Wang, Dashi Lu, Zikang Luo, Zheng Lian, Yifan Li, Hao Pan, Xuan Miao, Meiling Xin, Jie Xu, Linlin Song, Mingyu Li and Hongjun Ji

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500585

Recent advances in implantable sensors and electronics using printable materials for advanced healthcare

Seunghyeb Ban, Haran Lee, Jiehao Chen, Hee-Seok Kim, Yuhang Hu, Seong J. Cho and Woon-Hong Yeo

Biosensors and Bioelectronics, 2024, 257, 116302
DOI: 10.1016/j.bios.2024.116302

Mechanisms of coffee-ring suppression in Picoliter silver nanoparticle ink droplets: Implications for printed electronics

Yahya Rharbi, Vincent Faure, Anne Blayo, Albert Magnin and Aurore Denneulin

Journal of Colloid and Interface Science, 2026, 707, 139703
DOI: 10.1016/j.jcis.2025.139703

Fabrication and modulation of flexible electromagnetic metamaterials

Yanshuo Feng, Misheng Liang, Xiaoguang Zhao and Rui You

Microsyst Nanoeng, 2025, 11
DOI: 10.1038/s41378-024-00806-1

Two-Photon-Assisted Polymerization and Reduction: Emerging Formulations and Applications

Chee Leng Lay, Charlynn Sher Lin Koh, Yih Hong Lee, Gia Chuong Phan-Quang, Howard Yi Fan Sim, Shi Xuan Leong, Xuemei Han, In Yee Phang and Xing Yi Ling

ACS Appl. Mater. Interfaces, 2020, 12, 10061
DOI: 10.1021/acsami.9b20911

Wireless power transfer topology analysis for inkjet-printed coil

Pradeep Kumar Sahu, Satyaranjan Jena, Subrat Behera, Madan Mohan Sahu, Soubhagya Ranjan Prusty and Ritesh Dash

Open Engineering, 2022, 12, 373
DOI: 10.1515/eng-2022-0040

Inkjet printing of epitaxially connected nanocrystal superlattices

Daniel M. Balazs, N. Deniz Erkan, Michelle Quien and Tobias Hanrath

Nano Res., 2022, 15, 4536
DOI: 10.1007/s12274-021-4022-7

Fully Inkjet Printed Carbon Nanotube Thin-Film Transistors for Large-Area Flexible Backplanes

Paramita Kar Choudhury, Manoranjan and Y. N. Mohapatra

IEEE Flex. Electron., 2026, 5, 65
DOI: 10.1109/JFLEX.2026.3659090

Optical vortex laser drawing of silver nano-ink paste

Muneaki Iwata, Akihiko Kaneko, Ken-Ichi Yuyama and Takashige Omatsu

Opt. Continuum, 2026, 5, 118
DOI: 10.1364/OPTCON.579626

InkFiltration: Using Inkjet Printers for Acoustic Data Exfiltration from Air-Gapped Networks

Julian de Gortari Briseno, Akash Deep Singh and Mani Srivastava

ACM Trans. Priv. Secur., 2022, 25, 1
DOI: 10.1145/3510583

Inkjet-printed flexible piezoelectric sensor for self-powered biomedical monitoring

Hamed Abdolmaleki, Astri Bjørnetun Haugen, Youssif Merhi, Jens Vinge Nygaard and Shweta Agarwala

Materials Today Electronics, 2023, 5, 100056
DOI: 10.1016/j.mtelec.2023.100056

Accelerated deep-learning-based process monitoring of microfluidic inkjet printing

Seong Jae Kim, Eunsik Choi, Dong Yeon Won, Gyuhyeon Han, Kunsik An, Kyung-Tae Kang and Sanha Kim

CIRP Journal of Manufacturing Science and Technology, 2023, 46, 65
DOI: 10.1016/j.cirpj.2023.07.010

Jettability and printability of customized gold nanoparticles-based ink on flexible substrate through inkjet printing process

Mohammed Shariq, Rebeka Rudolf, Peter Majerič, Somnath Chattopadhyaya, Rupert Kargl, Bernd Friedrich, Andrews Nirmala Grace and Amit Rai Dixit

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, 682, 132837
DOI: 10.1016/j.colsurfa.2023.132837

Synthesis of a magnetic NiFe 2 O 4 @graphene oxide nanocomposite for efficient and rapid lead(II) ion removal from water

Abdolreza Abri and Alireza Maleki

Main Group Chemistry, 2026
DOI: 10.1177/10241221261416292

A review of recent progress in flexible capacitance pressure sensors: materials design, printing methods, and applications

Soly Mathew and Krishnamoorthi Chintagumpala

Adv Compos Hybrid Mater, 2025, 8
DOI: 10.1007/s42114-025-01304-2

3D printing for polymer/particle-based processing: A review

Weiheng Xu, Sayli Jambhulkar, Yuxiang Zhu, Dharneedar Ravichandran, Mounika Kakarla, Brent Vernon, David G. Lott, Jeffrey L. Cornella, Orit Shefi, Guillaume Miquelard-Garnier, Yang Yang and Kenan Song

Composites Part B: Engineering, 2021, 223, 109102
DOI: 10.1016/j.compositesb.2021.109102

Epidermal Bioelectronics for Management of Chronic Diseases: Materials, Devices and Systems

Zheng Qiao, Shuwen Chen, Shicheng Fan, Ze Xiong and Chwee Teck Lim

Advanced Sensor Research, 2023, 2
DOI: 10.1002/adsr.202200068

Inkjet-printed flexible sensors: From function materials, manufacture process, and applications perspective

Xuepei Wang, Mengjie Zhang, Luwei Zhang, Jinchao Xu, Xinqing Xiao and Xiaoshuan Zhang

Materials Today Communications, 2022, 31, 103263
DOI: 10.1016/j.mtcomm.2022.103263

Unobtrusive, Cuffless Blood Pressure Monitoring Using a Soft Polymer Sensor Array With Flexible Hybrid Electronics

Vega Pradana Rachim, Sehong Kang, Jin-Hyeok Baek and Sung-Min Park

IEEE Sensors J., 2021, 21, 10132
DOI: 10.1109/JSEN.2021.3059864

High-precision silver electrode based on PEN substrate with robust mechanical performance

Mingyue Hou, Xiaoqin Wei, Rihui Yao, Yucheng Huang, Rui Zhou, Kangping Zhang, Bocheng Jiang, Zihan Zhang, Honglong Ning and Junbiao Peng

Surfaces and Interfaces, 2024, 54, 105158
DOI: 10.1016/j.surfin.2024.105158

Nonlinear Waveform Optimization for Enhanced Ink Droplet Formation in Material Jetting

Qintao Shen, Li Zhang, Renquan Ji, Viboon Saetang and Huan Qi

Micromachines, 2025, 16, 445
DOI: 10.3390/mi16040445

Recent progress in carbon-based nanomaterials: critical review

Olushola Sunday Ayanda, Augusta Oluchi Mmuoegbulam, Onyemaechi Okezie, Naseer Inuwa Durumin Iya, Sa’adatu Eri Mohammed, Philip Hegarty James, Abba Bashir Muhammad, Augustine Agorye Unimke, Sabur Ajibola Alim, Sharhabil Musa Yahaya, Ayomipo Ojo, Toyin Olanike Adaramoye, Stella Kemilola Ekundayo, Aminu Abdullahi and Hamza Badamasi

J Nanopart Res, 2024, 26
DOI: 10.1007/s11051-024-06006-2

CNTs-based biosensors for enzyme detection

Nongawendé S.Gloria Saguin, Granthana Maulik, Xuejiao Cao, Xuan Luo, Anindya Nag, Jingrong Gao, Shanggui Deng and Jonathan W.C. Wong

Sensors and Actuators A: Physical, 2024, 377, 115753
DOI: 10.1016/j.sna.2024.115753

Polyaniline/poly (2-acrylamido-2-methyl-1-propanesulfonic acid) modified cellulose as promising material for sensors design

I. Ragazzini, I. Gualandi, G. D'Altri, V. Di Matteo, L. Yeasmin, M.C. Cassani, E. Scavetta, E. Bernardi and B. Ballarin

Carbohydrate Polymers, 2023, 316, 121079
DOI: 10.1016/j.carbpol.2023.121079

Inkjet-Printed Three-Electrode System on Flexible Substrate for Low-Cost Electrochemical Analysis

Jiena Lynne R. Pauco and Erwin P. Enriquez

KEM, 2022, 913, 45
DOI: 10.4028/p-426ih2

On-Substrate Preparation of a Poly(triphenylamino azomethine) for Electrochromic Devices

Heather L. Filiatrault, Kacper Muras, Monika Wałęsa-Chorab and W. G. Skene

Polymers, 2024, 16, 2440
DOI: 10.3390/polym16172440

Recent progress in printing flexible electronics: A review

Sheng Bi, BuHan Gao, Xu Han, ZhengRan He, Jacob Metts, ChengMing Jiang and Kyeiwaa Asare-Yeboah

Sci. China Technol. Sci., 2024, 67, 2363
DOI: 10.1007/s11431-021-2093-4

Guiding Cell Growth: Graphene-Patterned Polymeric Substrates for Enhanced Tissue Proliferation

Weronika Sosnowicz, Jakub Krzeminski, Jan Dominiczak, Dominik Baraniecki, Paulina Trzaskowska, Marta Corvo, Zuzanna Żołek-Tryznowska, Arkadiusz Jeznach, Malgorzata Jakubowska and Lucja Dybowska-Sarapuk

NSA, 2025, Volume 18, 531
DOI: 10.2147/NSA.S530959

Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics

Wenzheng Heng, Samuel Solomon and Wei Gao

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202107902

Micro-interdigitated electrodes genosensor based on Au-deposited nanoparticles for early detection of cervical cancer

F. Nadhirah Jaapar, N.A. Parmin, N. Hamidah A. Halim, Uda Hashim, Subash C.B. Gopinath, F. Syakirah Halim, M.N.A. Uda, Amilia Afzan, N. Mohamad Nor and Khairunisak Abdul Razak

International Journal of Biological Macromolecules, 2023, 253, 126745
DOI: 10.1016/j.ijbiomac.2023.126745

Direct-write printed controllable concave surface for fabricating flexible metal electrode

Kun Wang, Haiting Kang, Shuo Wang, Chenxi Li and Jiazhen Sun

Surfaces and Interfaces, 2024, 51, 104573
DOI: 10.1016/j.surfin.2024.104573

РАЗРАБОТКА ЧЕРНИЛ НА ОСНОВЕ INGAZNO ДЛЯ ПЕЧАТНОЙ МИКРОЭЛЕКТРОНИКИ

Э.М. Филалова, Е.В. Пикулина, А.А. Лошкарев, Е.И. Лошкарев, Е.И. Каменева, А.А. Лизунова and В.В. Иванов

Nanoindustry Russia, 2025, 18, 700
DOI: 10.22184/1993-8578.2025.18.11s.700.704

Fatigue behaviour of inkjet-printed silver interconnects on silica-coated mesoporous flexible PET substrate

Gurvinder Singh Khinda, Maan Z Kokash, Mohammed Alhendi, Behnam Garakani, Nancy C Stoffel, Peter Borgesen and Mark D Poliks

Flex. Print. Electron., 2022, 7, 015011
DOI: 10.1088/2058-8585/ac5e0e

Formulation of functional materials for inkjet printing: A pathway towards fully 3D printed electronics

Anil Bastola, Yinfeng He, Jisun Im, Geoffrey Rivers, Feiran Wang, Robyn Worsley, Jonathan S. Austin, Oliver Nelson-Dummett, Ricky D. Wildman, Richard Hague, Christopher J. Tuck and Lyudmila Turyanska

Materials Today Electronics, 2023, 6, 100058
DOI: 10.1016/j.mtelec.2023.100058

Implementation of hybrid PDMS-graphite/Ag conductive material for flexible electronic devices and microfluidic applications

Yanfang Guan, Fengqian Xu, Xiaoliang Wang, Yanbo Hui, Jie Sha, Yong Tian, Zhongying Wang, Shixiong Zhang, Dali Chen and Liyan Yang

Microelectronic Engineering, 2021, 235, 111455
DOI: 10.1016/j.mee.2020.111455

Materials, Electrical Performance, Mechanisms, Applications, and Manufacturing Approaches for Flexible Strain Sensors

Fei Han, Min Li, Huaiyu Ye and Guoqi Zhang

Nanomaterials, 2021, 11, 1220
DOI: 10.3390/nano11051220

Ultra‐Durable Information‐Encoded Anti‐Counterfeiting Self‐Assembled Nanocrystal Labels

Taha Haddadifam, Farzan Shabani, Mustafa Kalay, Aisan Khaligh, Evren Mutlugun, Mustafa Serdar Onses and Hilmi Volkan Demir

Advanced Optical Materials, 2026, 14
DOI: 10.1002/adom.202502884

Chemistry, Properties, and Patterning of Transparent and Conductive Materials

Keidy L. Matos, Anthony J. Russo and Adam B. Braunschweig

J. Phys. Chem. C, 2025, 129, 19207
DOI: 10.1021/acs.jpcc.5c05925

Laser-based three-dimensional manufacturing technologies for rechargeable batteries

Dan Moldovan, Jaeyoo Choi, Youngwoo Choo, Won-Sik Kim and Yoon Hwa

Nano Convergence, 2021, 8
DOI: 10.1186/s40580-021-00271-w

All‐Printed Green Micro‐Supercapacitors Based on a Natural‐derived Ionic Liquid for Flexible Transient Electronics

Lorenzo Migliorini, Claudio Piazzoni, Kaija Pohako‐Esko, Marta Di Girolamo, Andrea Vitaloni, Francesca Borghi, Tommaso Santaniello, Alvo Aabloo and Paolo Milani

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202102180

Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications

Karina Zub, Stephanie Hoeppener and Ulrich S. Schubert

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202105015

Recent advances in sustainable strategies for the integration of nanostructured sensing surfaces in electroanalytical devices

Filippo Silveri, Flavio Della Pelle and Dario Compagnone

TrAC Trends in Analytical Chemistry, 2025, 185, 118175
DOI: 10.1016/j.trac.2025.118175

Applications of Nanomaterials in RFID Wireless Sensor Components

Sojeong Roh, Trong Danh Nguyen and Jun Seop Lee

Applied Sciences, 2024, 14, 1216
DOI: 10.3390/app14031216

A Review on Three-Dimensional Printing for Energy Conversion and Storage: Recent Advances and Future Prospects

Yasmine I. Mesbah, Rufaydah A. Hassan and Nageh K. Allam

Energy Fuels, 2025, 39, 20084
DOI: 10.1021/acs.energyfuels.5c03606

Inkjet‐printed flexible MXetronics: Present status and future prospects

Rajavel Krishnamoorthy and Suprem R. Das

Applied Research, 2024, 3
DOI: 10.1002/appl.202300085

A novel data driven formulation for predicting jetting states and printing zone of high-viscosity nanosilver ink in inkjet-based 3D printing

Muhammad Ahsan Saleem, Xingzhi Xiao, Saqib Mamoon, Gang Li and Tingting Liu

Precision Engineering, 2025, 92, 63
DOI: 10.1016/j.precisioneng.2024.11.012

Formulation of conductive inks printable on textiles for electronic applications: a review

Abdelkrim Boumegnane, Ayoub Nadi, Cedric Cochrane, François Boussu, Omar Cherkaoui and Mohamed Tahiri

Textile Progress, 2022, 54, 103
DOI: 10.1080/00405167.2021.2094135

Laser writing of graphene on cellulose paper and analogous material for green and sustainable electronic: a concise review

Zulhelmi Ismail

Carbon Lett., 2022, 32, 1227
DOI: 10.1007/s42823-022-00365-3

Characterizations and Inkjet Printing of Carbon Black Electrodes for Dielectric Elastomer Actuators

Jianan Yi, Frank Babick, Carsten Strobel, Samuel Rosset, Luca Ciarella, Dmitry Borin, Katherine Wilson, Iain Anderson, Andreas Richter and E.-F. Markus Henke

ACS Appl. Mater. Interfaces, 2023, 15, 41992
DOI: 10.1021/acsami.3c05444

Machine learning-guided inkjet printing of tin oxide nanoparticle inks on laser-textured copper foils for high-performance sodium-ion battery anodes

Anesu Nyabadza, Suman Chatterjee, Sean Ryan, Jesus Inocente Medina Santos, Valeria Nicolosi, Dermot Brabazon and Mercedes Vazquez

Results in Engineering, 2025, 27, 106338
DOI: 10.1016/j.rineng.2025.106338

Laser-patterned Kirigami on conductive composites as multimodal sensors

H. Harija, Artem Prokopchuk, Enrico Langer, Aniket Chakaraborthy, B. Saran, Payel Majumdar, Anindya Nag, Andreas Richter and Mehmet E. Altinsoy

Sensors and Actuators A: Physical, 2025, 395, 117039
DOI: 10.1016/j.sna.2025.117039

Additive manufacturing: New paradigm for developing water splitting systems

S. Mojabi, N. Afsahi and N. Naseri

International Journal of Hydrogen Energy, 2024, 49, 116
DOI: 10.1016/j.ijhydene.2023.07.023

Nonlinear stress relaxation and failure of time‒strain separability of aqueous poly(ethylene oxide)/silica nanoparticle mixtures

Saki Kusakabe, Takuya Katashima, Ichiro Sakuma and Yuki Akagi

Polym J, 2025, 57, 163
DOI: 10.1038/s41428-024-00974-x

3D inkjet printing of hybrid electroactive ink based on molecularly imprinted polymers for lipopolysaccharides detection

Ana-Lorena Neagu, Ana-Mihaela Gavrila, Andreea Miron, Iulia Elena Neblea, Catalin Zaharia, Petru Epure, Hugues Brisset, Horia Iovu, Andrei Sarbu and Tanta-Verona Iordache

Electrochimica Acta, 2024, 506, 145044
DOI: 10.1016/j.electacta.2024.145044

The design of an inkjet drive waveform using machine learning

Seongju Kim, Minsu Cho and Sungjune Jung

Sci Rep, 2022, 12
DOI: 10.1038/s41598-022-08784-y

Inkless Multimaterial Printing Flexible Electronics by Directed Laser Deposition at Nano- and Microscale

Zabihollah Ahmadi, Aarsh Patel, Adib Taba, Suman Jaiswal, Seungjong Lee, Nima Shamsaei and Masoud Mahjouri-Samani

ACS Appl. Nano Mater., 2023, 6, 13965
DOI: 10.1021/acsanm.3c01814

Evaporation-induced self-assembled ultrathin AgNW networks for highly conformable wearable electronics

Chu Qin, Qingyin Sun, Yu Chen, Shah Fahad, Jiaxin Wu, Yuxuan Dong, Hongyu Yu and Min Wang

npj Flex Electron, 2024, 8
DOI: 10.1038/s41528-024-00314-2

Cold spray-based rapid and scalable production of printed flexible electronics

Semih Akin, Seungjun Lee, Seunghwan Jo, Duygu Gazioglu Ruzgar, Karthick Subramaniam, Jung-Ting Tsai and Martin Byung-Guk Jun

Additive Manufacturing, 2022, 60, 103244
DOI: 10.1016/j.addma.2022.103244

Recent Advances in High-Throughput Nanomaterial Manufacturing for Hybrid Flexible Bioelectronics

Nathan Zavanelli, Jihoon Kim and Woon-Hong Yeo

Materials, 2021, 14, 2973
DOI: 10.3390/ma14112973

On‐Demand Picoliter‐Level‐Droplet Inkjet Printing for Micro Fabrication and Functional Applications

Kejia You, Zhen Wang, Jiasong Lin, Xuan Guo, Liangxu Lin, Yang Liu, Fushan Li and Wei Huang

Small, 2024, 20
DOI: 10.1002/smll.202402638

Inkjet-Printed Flexible Transparent Conductive Electrodes Based on Water-Soluble Sacrificial Layer Transfer Printing Technology

Chen Chen, Chuang Liu, Haoran Quan, Yangliu Shi, Yue Han, Yuan Chai, He Dong and Jin Wang

J. Electron. Mater., 2025, 54, 5511
DOI: 10.1007/s11664-025-11924-5

Inkjet‐Printed p‐NiO/n‐ZnO Heterojunction Diodes for Photodetection Applications

Sergio González, Giovanni Vescio, Juan Luis Frieiro, Alina Hauser, Flavio Linardi, Julian López‐Vidrier, Marek Oszajca, Sergi Hernández, Albert Cirera and Blas Garrido

Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202300035

Metal-Based Inks for Printed Electronics. Comparison of the Main Approaches to Production

P. S. Popovetskiy

Colloid J, 2025, 87, 663
DOI: 10.1134/S1061933X25600435

Advancements in printed components for proton exchange membrane fuel cells: A comprehensive review

Guilherme Paixão da Costa, Diogo M.E. Garcia, Thi Hai Van Nguyen, Paul Lacharmoise and Claudia D. Simão

International Journal of Hydrogen Energy, 2024, 69, 710
DOI: 10.1016/j.ijhydene.2024.05.072

Recent developments in nanotechnology-based printing electrode systems for electrochemical sensors

Abera Demeke Ambaye, Kebede Keterew Kefeni, Shivani Bhardwaj Mishra, Edward Ndumiso Nxumalo and Bulelwa Ntsendwana

Talanta, 2021, 225, 121951
DOI: 10.1016/j.talanta.2020.121951

Solution processing for colloidal nanoparticle thin film: From fundamentals to applications

Wooseok Jeong, Hyeonseok Lee, Yun Jae Hwang, Boeun An, Yeongbin Lee, Heesoo Jeong, Gyuhyeon Kim, Yoonsu Park, Minyoung Kim and Don-Hyung Ha

Advances in Colloid and Interface Science, 2025, 342, 103538
DOI: 10.1016/j.cis.2025.103538

Inkjet Printing Humidity Sensing Pattern Based on Self-Organizing Polystyrene Spheres

Valeriia O. Neterebskaia, Anna O. Goncharenko, Sofia M. Morozova, Denis S. Kolchanov and Alexandr V. Vinogradov

Nanomaterials, 2020, 10, 1538
DOI: 10.3390/nano10081538

Printed Electronics in Radiofrequency Energy Harvesters and Wireless Power Transfer Rectennas for IoT Applications

Kacper Skarżyński and Marcin Słoma

Adv Elect Materials, 2023, 9
DOI: 10.1002/aelm.202300238

Inkjet Printing of a Benzocyclobutene-Based Polymer as a Low-k Material for Electronic Applications

Filippo Iervolino, Raffaella Suriano, Martina Scolari, Ilaria Gelmi, Laura Castoldi and Marinella Levi

ACS Omega, 2021, 6, 15892
DOI: 10.1021/acsomega.1c01488

1,8‐Octanedithiol as an Effective Intermediate Layer for Deposition of Cu Electrodes via Inkjet Printing and Laser Sintering on III–V Triple‐Junction Solar Cells

Nastaran Hayati-Roodbari, Alexander Wheeldon, Alexander Fian and Roman Trattnig

Physica Status Solidi (a), 2022, 219
DOI: 10.1002/pssa.202200089

In situ decoration of Ag@exfoliated graphite composite catalyst for Fenton-like oxidation of methylene blue dye: kinetic and thermodynamic studies

Somia M. Abbas and Khadiga M. Abas

BMC Chemistry, 2025, 19
DOI: 10.1186/s13065-025-01584-1

Precise Control of Lead Halide and Ammonium Salt Stoichiometric Ratios for Efficient Perovskite Solar Cells

Hengyi Jiang, Rui Yang, Ziqi Zhu, Chao Sun, Yongbin Jin, Lingfang Zheng, Lina Shen, Chengbo Tian, Liqiang Xie, Jinxin Yang and Zhanhua Wei

Advanced Science, 2025, 12
DOI: 10.1002/advs.202416634

Synthesis of a silver nanoparticle ink for fabrication of reference electrodes

Ana Elisa Ferreira Oliveira, Arnaldo César Pereira, Mayra Asevedo Campos de Resende and Lucas Franco Ferreira

Talanta Open, 2022, 5, 100085
DOI: 10.1016/j.talo.2022.100085

Adhesion nanoarchitectonics of inkjet-printed silver nanoparticles on various substrates after furnace sintering

Taepyo Lim, Hee-Lak Lee, Kyongtae Ryu, Yoon-Jae Moon, Jun Young Hwang and Seung Jae Moon

Appl. Phys. A, 2024, 130
DOI: 10.1007/s00339-024-07352-7

Fabrication of Highly Conductive Inkjet Printing Silver Nanoparticle Ink via a Synergistic Strategy Combining Centrifugal Classification and Dispersant Optimization

Guo-Xiang Zhou, Yan Wang, Xing-Ping Zhou, Kuang Zhang, Zhi-Hua Yang, De-Chang Jia and Yu Zhou

Materials, 2026, 19, 628
DOI: 10.3390/ma19030628

Wearable Printed Temperature Sensors: Short Review on Latest Advances for Biomedical Applications

Saleem Khan, Shaukat Ali, Arshad Khan and Amine Bermak

IEEE Rev. Biomed. Eng., 2023, 16, 152
DOI: 10.1109/RBME.2021.3121480

Novel Approaches in 3D Printing Techniques for the Development of High-Performance Micro-Batteries

Anupama Shaju, Rehana P Ummer, Sabu Thomas and Balasubramanian Kandasubramanian

J. Electron. Mater., 2025, 54, 1531
DOI: 10.1007/s11664-024-11659-9

Recent Progress in Wearable Biosensors: From Healthcare Monitoring to Sports Analytics

Shun Ye, Shilun Feng, Liang Huang and Shengtai Bian

Biosensors, 2020, 10, 205
DOI: 10.3390/bios10120205

2D Material‐Based Wearable Energy Harvesting Textiles: A Review

Iftikhar Ali, Marzia Dulal, Nazmul Karim and Shaila Afroj

Small Structures, 2024, 5
DOI: 10.1002/sstr.202300282

Importance of the Heat Treatment Scheme on Self-Reducing Reactive Silver Inks

Steven J. DiGregorio, Subbarao Raikar and Owen J. Hildreth

ACS Appl. Electron. Mater., 2024, 6, 203
DOI: 10.1021/acsaelm.3c01082

Fabrication and inkjet printing of manganese oxide electrodes for energy storage

Anesu Nyabadza, Achu Titus, Éanna McCarthy, Lola Azoulay-Younes, Sean Ryan, Sithara Sreenilayam, Valeria Nicolosi, Mercedes Vazquez and Dermot Brabazon

Chemical Engineering Journal Advances, 2025, 22, 100761
DOI: 10.1016/j.ceja.2025.100761

Electromigration and electrical sintering in printed silver from high current at room temperature

Uidam Jung and Ryan Wagner

Flex. Print. Electron., 2024, 9, 025020
DOI: 10.1088/2058-8585/ad5454

Low‐Temperature Sintering Copper Inks: In‐Situ X‐Ray Diffraction of Decomposition, Enhanced Conductivity and Morphology, and Nickel‐Improved Weather Resistance

Yi Zheng, Hiroki Tsukamoto and Tetsu Yonezawa

ChemNanoMat, 2026, 12
DOI: 10.1002/cnma.202500768

Fabrication of Silver Mesh/Grid and Its Applications in Electronics

Haihua Zhou and Yanlin Song

ACS Appl. Mater. Interfaces, 2021, 13, 3493
DOI: 10.1021/acsami.0c18518

Hybrid Fabrication of an Electrochemical Electrode via Inkjet Printing on 3D-Printed Substrates

Md Tawabur Rahman, Jessica Bone, Thomas J. Roussel, Judith L. Jenkins and Aron J. Huckaba

ACS Omega, 2026
DOI: 10.1021/acsomega.5c12154

Inkjet-Printed Electronics on Paper for RF Identification (RFID) and Sensing

Sangkil Kim

Electronics, 2020, 9, 1636
DOI: 10.3390/electronics9101636

Printed Strain Sensors for Motion Recognition: A Review of Materials, Fabrication Methods, and Machine Learning Algorithms

Nathan Zavanelli, Kangkyu Kwon and Woon-Hong Yeo

IEEE Open J. Eng. Med. Biol., 2025, 6, 353
DOI: 10.1109/OJEMB.2023.3330290

Patterns from dried drops as a characterisation and healthcare diagnosis technique, potential and challenges: A review

K. Sefiane, G. Duursma and A. Arif

Advances in Colloid and Interface Science, 2021, 298, 102546
DOI: 10.1016/j.cis.2021.102546

Multi‐Jet Fusion 3D Voxel Printing of Conductive Elastomers

Jiayao Chen, Lihua Zhao and Kun Zhou

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202205909

Off the Grid: A new strategy for material-jet 3D printing with enhanced sub-droplet resolution

Oliver Nelson-Dummett, Geoffrey Rivers, Negar Gilani, Marco Simonelli, Christopher J. Tuck, Ricky D. Wildman, Richard J.M. Hague and Lyudmila Turyanska

Additive Manufacturing Letters, 2024, 8, 100185
DOI: 10.1016/j.addlet.2023.100185

Conformal Metasurfaces: A Novel Solution for Vehicular Communications

Marouan Mizmizi, Reza Aghazadeh Ayoubi, Dario Tagliaferri, Kai Dong, Gian Guido Gentili and Umberto Spagnolini

IEEE Trans. Wireless Commun., 2023, 22, 2804
DOI: 10.1109/TWC.2022.3213901

High‐Resolution and High‐Conductivity Electrodes via Two‐Step Annealing‐Enhanced Solvent‐Free Patterning of Silver Nanoparticles

Sangmok Kim, Dong‐Joon Won, Dongwoo Yoo and Joonwon Kim

Small, 2025, 21
DOI: 10.1002/smll.202506786

Direct Modular Printing of Plasmonic Chemosensors

I. Brian Becerril-Castro, Irene Calderon, Jana Ockova, Matz Liebel, Niek F. van Hulst, Vincenzo Giannini and Ramon A. Alvarez-Puebla

ACS Appl. Mater. Interfaces, 2022, 14, 57165
DOI: 10.1021/acsami.2c17202

Rational design, synthesis, and characterization of facilitated transport membranes exhibiting enhanced permeability, selectivity and stability

Matthew T. Webb, Lucas C. Condes, Harold G. Ly, Michele Galizia and Sepideh Razavi

Journal of Membrane Science, 2023, 685, 121910
DOI: 10.1016/j.memsci.2023.121910

A novel pre-deposition assisted strategy for inkjet printing graphene-based flexible pressure sensor with enhanced performance

Jiawei Sun, Yunfei Sun, Haiyang Jia, Hengchang Bi, Lixiang Chen, Miaoling Que, Yuwei Xiong, Longxiang Han and Litao Sun

Carbon, 2022, 196, 85
DOI: 10.1016/j.carbon.2022.04.021

Understanding the formation of particle bands and fingering patterns during evaporation of a sessile droplet containing colloids

Appurva Tiwari, Sehyun Shin, Seong Jae Lee and Ashish Kumar Thokchom

Colloid and Interface Science Communications, 2023, 56, 100740
DOI: 10.1016/j.colcom.2023.100740

Advancements in transfer printing techniques for flexible electronics: adjusting interfaces and promoting versatility

Zijian Chen, Chi Zhang and Zijian Zheng

Int. J. Extrem. Manuf., 2024, 6, 052005
DOI: 10.1088/2631-7990/ad5391

Multi-Parameter Prediction of Inkjet Droplet Characteristics Based on Dual-Pulse Waveform and Ensemble Learning

Shaojie Tang, Hongwu Zhan, Yankang Zhang, Yinwei Zhang and Yunyun Shen

IEEE Access, 2025, 13, 147925
DOI: 10.1109/ACCESS.2025.3594274

Nanoscale Patterning of Carbon Nanotubes: Techniques, Applications, and Future

Alexander Corletto and Joseph G. Shapter

Advanced Science, 2021, 8
DOI: 10.1002/advs.202001778

Reverse Micelle Synthesis of Metal Oxides

A. S. Chernukha, G. M. Zirnik, K. V. Matveev, Y. V. Boleiko, T. A. Markin, E. S. Anannikov, A. A. Loshkarev, S. A. Gudkova and D. A. Vinnik

J Struct Chem, 2025, 66, 569
DOI: 10.1134/S0022476625030138

Next‐generation anti‐counterfeit security using carbon nanodots: Tunable luminescence and sustainable ink design—A review

Angelica Rachel E. Carpio, Lyn Marie De Juan‐Corpuz and Ryan D. Corpuz

J Chinese Chemical Soc, 2026, 73, 257
DOI: 10.1002/jccs.70133

3D freeze-printed cellulose-based aerogels: Obtaining truly 3D shapes, and functionalization with cross-linking and conductive additives

Halil Tetik, Keren Zhao, Nasrullah Shah and Dong Lin

Journal of Manufacturing Processes, 2021, 68, 445
DOI: 10.1016/j.jmapro.2021.05.051

Inkjet-Printed Bio-Based Melanin Composite Humidity Sensor for Sustainable Electronics

Peter Krebsbach, Mikel Rincón-Iglesias, Manuel Pietsch, Carmen Henel, Senentxu Lanceros-Mendez, Jun Wei Phua, Marianna Ambrico and Gerardo Hernandez-Sosa

ACS Appl. Mater. Interfaces, 2024, 16, 42555
DOI: 10.1021/acsami.4c06596

Memristive TiO2: Synthesis, Technologies, and Applications

Georgii A. Illarionov, Sofia M. Morozova, Vladimir V. Chrishtop, Mari-Ann Einarsrud and Maxim I. Morozov

Front. Chem., 2020, 8
DOI: 10.3389/fchem.2020.00724

3D Printing of Customizable Transient Bioelectronics and Sensors

Nicolas Fumeaux and Danick Briand

Adv Elect Materials, 2024, 10
DOI: 10.1002/aelm.202400058

A cold spray-based novel manufacturing route for flexible electronics

Semih Akin, Seunghwan Jo and Martin Byung-Guk Jun

Journal of Manufacturing Processes, 2023, 86, 98
DOI: 10.1016/j.jmapro.2022.12.035

Inkjet printed 3D architectures: from silver micropillar arrays and lattices to multimaterial metamaterials

Oliver Nelson-Dummett, Thomas Whittaker, William Whittow, Jacek Wojcik, Juan Francisco Reyes Luna, Caitlin McCall, Ahmet Koca, Christopher J. Tuck, Richard J.M. Hague and Lyudmila Turyanska

Materials Today Advances, 2025, 26, 100584
DOI: 10.1016/j.mtadv.2025.100584

Boron Nitride Nanotube Coatings for Thermal Management of Printed Silver Inks on Temperature Sensitive Substrates

Kaitlin Wagner, Chantal Paquet, Yadienka Martinez‐Rubi, Marc Genest, Jingwen Guan, Kathleen L. Sampson, Keun Su Kim, Arnold J. Kell, Patrick R. L. Malenfant and Benoît H. Lessard

Adv Elect Materials, 2021, 7
DOI: 10.1002/aelm.202001035

Impact of Nanoparticle Size and Loading on Printability of Composite Inks for Direct Ink Writing

Yun Li, Aidan Flynn, Christopher Masternick, Brandon Kolanovic, Bin Li and Bo Li

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401443

Spatial control of the conductivity in SrTiO3-based heterointerfaces using inkjet printing

T Hvid-Olsen, C Gadea, F B Holde, K M Hoffmann, T S Jespersen, K Grove-Rasmussen, F Trier and D V Christensen

J. Phys. Energy, 2022, 4, 044005
DOI: 10.1088/2515-7655/ac9084

Piezoelectric Drop‐On‐Demand Inkjet Printing of High‐Viscosity Inks

Roberto Bernasconi, Stefano Brovelli, Prisca Viviani, Marco Soldo, Domenico Giusti and Luca Magagnin

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202100733

Enhanced Performance of Inkjet Printed Red Quantum Dot Light‐Emitting Diodes Influenced by ETL Uniformity with Solvent Systems

Seong Woo Jeong, Jin Ho Park, Collins Kiguye, Jaebum Jeong, Jun Young Park, Dae Yun Kim, Byeong Guk Jeong, Dong Ryeol Whang and Jun Young Kim

Advanced Optical Materials, 2025, 13
DOI: 10.1002/adom.202500413

Evaluation of Cocrystallization Outcomes of Multicomponent Adducts: Rapid Fabrication to Achieve Uniform Particle Size Distribution Using Thermal Inkjet Printing

Raviteja Seera and Tayur N. Guru Row

Crystal Growth & Design, 2020, 20, 4667
DOI: 10.1021/acs.cgd.0c00469

Flexible Electronics: Status, Challenges and Opportunities

Daniel Corzo, Guillermo Tostado-Blázquez and Derya Baran

Front.Electron., 2020, 1
DOI: 10.3389/felec.2020.594003

New fabrication method for producing reduced graphene oxide flexible electrodes by using a low-power visible laser diode engraving system

A Chuquitarqui, L C Cotet, M Baia, E György, K Magyari, L Barbu-Tudoran, L Baia, M Díaz-González, C Fernández-Sánchez and A Pérez Del Pino

Nanotechnology, 2020, 31, 325402
DOI: 10.1088/1361-6528/ab8d67

Additive Nanomanufacturing of Multifunctional Materials and Patterned Structures: A Novel Laser‐Based Dry Printing Process

Zabihollah Ahmadi, Seungjong Lee, Raymond R. Unocic, Nima Shamsaei and Masoud Mahjouri‐Samani

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202001260

Nickel-Based Inks for Flexible Electronics — A Review on Recent Trends

Hari Murthy, Neha Thakur and Nisha Shankhwar

J. Adv. Manuf. Syst., 2022, 21, 591
DOI: 10.1142/S0219686722500214

Reliable transfer enabled by UV-curable stamp with tunable rigidity

Lei Chen, Yuan Niu, Cuihong Liu, Runhong Fan, Peng Liu, Dongxu Ma, Xiaoqing Zhang, Chengzhi Liu and Huigao Duan

Surfaces and Interfaces, 2024, 55, 105348
DOI: 10.1016/j.surfin.2024.105348

Nanoassembly of gold nanoparticles: An active substrate for size-dependent surface-enhanced Raman scattering

Mohammad Kamal Hossain

Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2020, 242, 118759
DOI: 10.1016/j.saa.2020.118759

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications

Shane Lawson, Xin Li, Harshul Thakkar, Ali A. Rownaghi and Fateme Rezaei

Chem. Rev., 2021, 121, 6246
DOI: 10.1021/acs.chemrev.1c00060

Design and development of conductive nanomaterials for electrochemical sensors: a modern approach

T. Kant, K. Shrivas, K. Dewangan, A. Kumar, N.K. Jaiswal, M.K. Deb and S. Pervez

Materials Today Chemistry, 2022, 24, 100769
DOI: 10.1016/j.mtchem.2021.100769

Ink Formulation and Printing Parameters for Inkjet Printing of Two Dimensional Materials: A Mini Review

Ho-Young Jun, Se-Jung Kim and Chang-Ho Choi

Nanomaterials, 2021, 11, 3441
DOI: 10.3390/nano11123441

Development of Nanosuspension Formulations Compatible with Inkjet Printing for the Convenient and Precise Dispensing of Poorly Soluble Drugs

Dennis H. Leung

Pharmaceutics, 2022, 14, 449
DOI: 10.3390/pharmaceutics14020449

Towards robust flexible electronics: Fabrication approaches and ongoing research challenges

Babatunde Olamide Omiyale, Akinola Ogbeyemi, Muhammad Awais Ashraf, Ki-Young Song and Wenjun Chris Zhang

Sensors and Actuators A: Physical, 2025, 395, 117053
DOI: 10.1016/j.sna.2025.117053

Printable conductive inks used for the fabrication of electronics: an overview

Evgenia Dimitriou and Nikolaos Michailidis

Nanotechnology, 2021, 32, 502009
DOI: 10.1088/1361-6528/abefff

A Novel Pre-Deposition Assisted Strategy for Inkjet Printing Graphene-Based Flexible Pressure Sensor with Enhanced Performance

Jiawei Sun, Yunfei Sun, Haiyang Jia, Hengchang Bi, Lixiang Chen, Miaoling Que, Yuwei Xiong, Longxiang Han and Litao Sun

SSRN Journal, 2022
DOI: 10.2139/ssrn.4049507

Multifunctional flexible and stretchable electrochromic energy storage devices

Libu Manjakkal, Luis Pereira, Eric Kumi Barimah, Paul Grey, Fabiane F. Franco, Zhengyu Lin, Gin Jose and Richard A. Hogg

Progress in Materials Science, 2024, 142, 101244
DOI: 10.1016/j.pmatsci.2024.101244

A review on recent advancements in electrochemical detection of dopamine using carbonaceous nanomaterials

Georgia Balkourani, Angeliki Brouzgou and Panagiotis Tsiakaras

Carbon, 2023, 213, 118281
DOI: 10.1016/j.carbon.2023.118281

Influence of the thermal annealing on the morphological and structural properties of ZnO films deposited onto polyimide substrates by ink-jet printing

O. Dobrozhan, R. Pshenychnyi, S. Vorobiov, D. Kurbatov, V. Komanicky and A. Opanasyuk

SN Appl. Sci., 2020, 2
DOI: 10.1007/s42452-020-2145-1

Monitoring Symptoms of Infectious Diseases: Perspectives for Printed Wearable Sensors

Ala’aldeen Al-Halhouli, Ahmed Albagdady, Ja’far Alawadi and Mahmoud Abu Abeeleh

Micromachines, 2021, 12, 620
DOI: 10.3390/mi12060620

Facile one-pot synthesis of bimodal-sized nickel nanoparticles in a solvent-directed reaction system

Shengnan Liu, Sze Kee Tam and Ka Ming Ng

J Nanopart Res, 2022, 24
DOI: 10.1007/s11051-022-05520-5

Challenges in carbon ink formulation and strategies for fabrication of flexible supercapacitors

Mohammad Saquib, Shilpa Shetty, Lakshmikanth M, Akshatha Rathod, Kavya Naik, Ramakrishna Nayak and M. Selvakumar

Carbon Trends, 2025, 19, 100458
DOI: 10.1016/j.cartre.2025.100458

Comparison of different experimental methods for measuring droplet size in inkjet printing

Yuehua Hu, Dong Yeol Shin, Yoon Jae Moon, Jaekyun Kim and Kyung-Tae Kang

J. meas. eng., 2025, 13, 888
DOI: 10.21595/jme.2025.24880

Optimization of Hybrid Ink Formulation and IPL Sintering Process for Ink-Jet 3D Printing

Jae-Young Lee, Cheong-Soo Choi, Kwang-Taek Hwang, Kyu-Sung Han, Jin-Ho Kim, Sahn Nahm and Bum-Seok Kim

Nanomaterials, 2021, 11, 1295
DOI: 10.3390/nano11051295

In-situ tension investigation of additively manufactured silver lines on flexible substrates

Seungjong Lee, Zabihollah Ahmadi, Mikyle Paul, Masoud Mahjouri-Samani, Shuai Shao and Nima Shamsaei

Additive Manufacturing Letters, 2023, 7, 100171
DOI: 10.1016/j.addlet.2023.100171

Closed-loop direct ink extruder system with multi-part materials mixing

Markellos Ntagios, Habib Nassar and Ravinder Dahiya

Additive Manufacturing, 2023, 64, 103437
DOI: 10.1016/j.addma.2023.103437

Conductive Inks Based on Melamine Intercalated Graphene Nanosheets for Inkjet Printed Flexible Electronics

Magdalena Kralj, Sara Krivačić, Irena Ivanišević, Marko Zubak, Antonio Supina, Marijan Marciuš, Ivan Halasz and Petar Kassal

Nanomaterials, 2022, 12, 2936
DOI: 10.3390/nano12172936

The Recent Progress on Silver Nanoparticles: Synthesis and Electronic Applications

Abderrhmane Bouafia, Salah Eddine Laouini, Abdelaal S. A. Ahmed, Alexander V. Soldatov, Hamed Algarni, Kwok Feng Chong and Gomaa A. M. Ali

Nanomaterials, 2021, 11, 2318
DOI: 10.3390/nano11092318

Effect of ink formulation on the inkjet printing process of Al–ZnO nanoparticles

Olga Shavdina, Céline Grillot, Arnaud Stolz, Fabien Giovannelli, Valêrie Bertagna, Jimmy Nicolle, Christine Vautrin-Ul, Chantal Boulmer-Leborgne and Nadjib Semmar

J Coat Technol Res, 2021, 18, 591
DOI: 10.1007/s11998-020-00427-z

Versatile Selective Soldering via Molten Metal Printing for Heat‐Sensitive 3D Electronics and Smart Wearables

Dániel Straubinger, Peter Koltay, Roland Zengerle, Sabrina Kartmann and Zhe Shu

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202419653

A Precursor‐Derived Ultramicroporous Carbon for Printing Iontronic Logic Gates and Super‐Varactors

Christin Gellrich, Leonid Shupletsov, Przemyslaw Galek, Ahmed Bahrawy, Julia Grothe and Stefan Kaskel

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202401336

Inkjet printing of a polymeric vibration damper for MEMS application adopting a step-reticulation process

Prisca Viviani, Maria Teresa Caporaso, Martina Scolari, Ilaria Gelmi, Laura Castoldi and Luca Magagnin

Journal of Manufacturing Processes, 2024, 120, 966
DOI: 10.1016/j.jmapro.2024.04.079

Fast and Massive Pixel-Level Morphology Detection by Imaging Processing for Inkjet Printing

Haoyang Zhang, Da Xu, Shanrong Ke, Meicong Huang, Yaling Chai, Yi Lin, Ziquan Guo and Zhong Chen

Micromachines, 2024, 15, 606
DOI: 10.3390/mi15050606

Inkjet Printing of Perovskite Ceramics for High-Performance Proton Ceramic Fuel Cells

Wanhyuk Chang, Eun Heui Kang, Heon Jun Jeong, Wonjoon Choi and Joon Hyung Shim

SSRN Journal, 2022
DOI: 10.2139/ssrn.4124412

Preparation of highly loaded copper(II) oxide nanoparticle suspensions for LIFT-printing of electronics

Evgenia Dimitriou and Nikolaos Michailidis

European Journal of Materials, 2024, 4
DOI: 10.1080/26889277.2024.2316918

Highly Stretchable and Sensitive Strain Sensor based on Ionogel/Ag Synergistic Conductive Network

Jingxian Sun, Yixin Yuan, Guoqiang Lu, Tanlong Xue, Jun Nie and Yan Lu

Adv Materials Inter, 2022, 9
DOI: 10.1002/admi.202102245

Smart polymers and nanocomposites for 3D and 4D printing

Mojtaba Falahati, Parvaneh Ahmadvand, Shahriar Safaee, Yu-Chung Chang, Zhaoyuan Lyu, Roland Chen, Lei Li and Yuehe Lin

Materials Today, 2020, 40, 215
DOI: 10.1016/j.mattod.2020.06.001

Inkjet printing on hydrophobic surfaces: Controlled pattern formation using sequential drying

Paria Naderi, Benjamin Raskin Sheuten, Alidad Amirfazli and Gerd Grau

The Journal of Chemical Physics, 2023, 159
DOI: 10.1063/5.0149663

Cost-Effective and Self-Reducible Cu-Ni Composite Ink for Low Temperature Fabricating Highly Conductive and Anti-Oxidative Electrode

Yun Mou, Jiaxin Liu, Qing Wang, Zhenyu Lei, Fengshun Wu and Mingxiang Chen

SSRN Journal, 2022
DOI: 10.2139/ssrn.4073331

Pressure-constrained sonication activation of flexible printed metal circuit

Lingxiao Cao, Zhonghao Wang, Daiwei Hu, Haoxuan Dong, Chunchun Qu, Yi Zheng, Chao Yang, Rui Zhang, Chunxiao Xing, Zhen Li, Zhe Xin, Du Chen, Zhenghe Song and Zhizhu He

Nat Commun, 2024, 15
DOI: 10.1038/s41467-024-52873-7

Ultrasound-assisted facile and green preparation of Ag nanoparticle conductive ink for printing electronics

Junyan Feng, Bo Xing and Kaifeng Li

mat express, 2024, 14, 416
DOI: 10.1166/mex.2024.2683

Amphiphilic Silver Nanoparticles for Inkjet-Printable Conductive Inks

Irena Ivanišević, Marin Kovačić, Marko Zubak, Antonia Ressler, Sara Krivačić, Zvonimir Katančić, Iva Gudan Pavlović and Petar Kassal

Nanomaterials, 2022, 12, 4252
DOI: 10.3390/nano12234252

Statistically Representative Metrology of Nanoparticles via Unsupervised Machine Learning of TEM Images

Haotian Wen, José María Luna-Romera, José C. Riquelme, Christian Dwyer and Shery L. Y. Chang

Nanomaterials, 2021, 11, 2706
DOI: 10.3390/nano11102706

Inkjet printing of multi-stripes based deflection monitoring sensor on flexible substrate

Saleem Khan, Shawkat Ali, Arshad Khan, Moaaz Ahmed, Bo Wang and A. Bermak

Sensors and Actuators A: Physical, 2021, 323, 112638
DOI: 10.1016/j.sna.2021.112638

Photoluminescent and Chromic Nanomaterials for Anticounterfeiting Technologies: Recent Advances and Future Challenges

Amin Abdollahi, Hossein Roghani-Mamaqani, Bahareh Razavi and Mehdi Salami-Kalajahi

ACS Nano, 2020, 14, 14417
DOI: 10.1021/acsnano.0c07289

Insights into the Electrical Characterization of Graphene-like Materials from Carbon Black

Raffaella Ferraiuolo, Michela Alfe, Valentina Gargiulo, Giovanni Piero Pepe, Francesco Tafuri, Alessandro Pezzella, Giovanni Ausanio and Domenico Montemurro

Coatings, 2022, 12, 1788
DOI: 10.3390/coatings12111788

High Speed In-situ X-ray Imaging of 3D Freeze Printing of Aerogels

Halil Tetik, Guang Yang, Wenda Tan, Anthony Fong, Shuting Lei, Johanna Nelson Weker and Dong Lin

Additive Manufacturing, 2020, 36, 101513
DOI: 10.1016/j.addma.2020.101513

3D printed electronics: Processes, materials and future trends

Hong Wei Tan, Yu Ying Clarrisa Choong, Che Nan Kuo, Hong Yee Low and Chee Kai Chua

Progress in Materials Science, 2022, 127, 100945
DOI: 10.1016/j.pmatsci.2022.100945

Recent Notable Approaches to Study Self‐Assembly of Nanoparticles with X‐Ray Scattering and Electron Microscopy

Florian Schulz, Irina Lokteva, Wolfgang J. Parak and Felix Lehmkühler

Part & Part Syst Charact, 2021, 38
DOI: 10.1002/ppsc.202100087

Fully inkjet printed flexible SWCNT based TFT: Impact of traps on characteristics

Manoranjan, Paramita Kar Choudhury and Y. N. Mohapatra

APL Electronic Devices, 2025, 1
DOI: 10.1063/5.0297245

Additively Manufactured, Flexible 5G Electronics for MIMO, IoT, Digital Twins, and Smart Cities Applications

Theodore W. Callis, Kexin Hu, Hani Al Jamal and Manos M. Tentzeris

Int. J. Hi. Spe. Ele. Syst., 2024, 33
DOI: 10.1142/S0129156424400664

Fabrication of manganese-tin electrodes for sodium-ion battery and supercapacitor applications via laser ablation, laser texturing, and inkjet printing

Anesu Nyabadza, Sean Ryan, Suman Chatterjee, Danielle Douglas Henry, Suganya Pitchai Muthusamy, Jesus Inocente Medina Santos, Tina Sadat Hashemi, Valeria Nicolosi, Dermot Brabazon and Mercedes Vazquez

Chemical Engineering Journal Advances, 2025, 23, 100799
DOI: 10.1016/j.ceja.2025.100799

Inkjet Printing Transparent and Conductive MXene (Ti3C2Tx) Films: A Strategy for Flexible Energy Storage Devices

Dong Wen, Xiang Wang, Lu Liu, Cong Hu, Cheng Sun, Yiran Wu, Yinlong Zhao, Jianxin Zhang, Xudong Liu and Guobing Ying

ACS Appl. Mater. Interfaces, 2021, 13, 17766
DOI: 10.1021/acsami.1c00724

Microstructure engineering and conductivity optimization in silver films via Mixed Amine-MOD Ink

Yue Dong, Yuxin Dong, Xuan Tang, Zhimei Xu, Xiang Ke and Xuchun Wang

Synthetic Metals, 2025, 315, 117951
DOI: 10.1016/j.synthmet.2025.117951

Highly Conductive, Flexible, and Oxidation-Resistant Cu-Ni Electrodes Produced from Hybrid Inks at Low Temperatures

Daisuke Tomotoshi, Rika Oogami and Hideya Kawasaki

ACS Appl. Mater. Interfaces, 2021, 13, 20906
DOI: 10.1021/acsami.1c04235

Preparation and Characterization of Polypropylene/Carbon Nanotubes (PP/CNTs) Nanocomposites as Potential Strain Gauges for Structural Health Monitoring

Bartolomeo Coppola, Luciano Di Maio, Loredana Incarnato and Jean-Marc Tulliani

Nanomaterials, 2020, 10, 814
DOI: 10.3390/nano10040814

Flexible and Stretchable Electrically Conductive Polymer Materials for Physical Sensing Applications

Jui-Chi Lin, Panos Liatsis and Paschalis Alexandridis

Polymer Reviews, 2023, 63, 67
DOI: 10.1080/15583724.2022.2059673

Reviews on Machine Learning Approaches for Process Optimization in Noncontact Direct Ink Writing

Haining Zhang and Seung Ki Moon

ACS Appl. Mater. Interfaces, 2021, 13, 53323
DOI: 10.1021/acsami.1c04544

Recent Advances in Printing Technologies of Nanomaterials for Implantable Wireless Systems in Health Monitoring and Diagnosis

Robert Herbert, Hyo‐Ryoung Lim, Sehyun Park, Jong‐Hoon Kim and Woon‐Hong Yeo

Adv Healthcare Materials, 2021, 10
DOI: 10.1002/adhm.202100158

Photoinduced flexible graphene/polymer nanocomposites: Design, formation mechanism, and properties engineering

Anna Lipovka, Ilia Petrov, Maxim Fatkullin, Gennadiy Murastov, Alexey Ivanov, Nelson E. Villa, Sergey Shchadenko, Andrey Averkiev, Anna Chernova, Fedor Gubarev, Muhammad Saqib, Wenbo Sheng, Jin-Ju Chen, Olfa Kanoun, Ihsan Amin, Raul D. Rodriguez and Evgeniya Sheremet

Carbon, 2022, 194, 154
DOI: 10.1016/j.carbon.2022.03.039

Effectiveness of Oxygen during Sintering of Silver Thin Films Derived by Nanoparticle Ink

Feng Feng, Haofeng Hong, Xing Gao, Tian Ren, Yuan Ma and Pingfa Feng

Nanomaterials, 2022, 12, 1908
DOI: 10.3390/nano12111908

One-step fabrication of functionalized electrodes on 3D-printed polymers for triboelectric nanogenerators

Semih Akin, Taehoo Chang, Sk Shamim Hasan Abir, Young Won Kim, Shujia Xu, Jongcheon Lim, Yuseop Sim, Jiho Lee, Jung-Ting Tsai, Chandra Nath, Hyowon Lee, Wenzhuo Wu, Johnson Samuel, Chi Hwan Lee and Martin Byung-Guk Jun

Nano Energy, 2024, 129, 110082
DOI: 10.1016/j.nanoen.2024.110082

A green approach to water‐based graphene ink with reverse coffee ring effect

Laxmidhar Nayak, Smita Mohanty and Ananthakumar Ramadoss

J Mater Sci: Mater Electron, 2021, 32, 7431
DOI: 10.1007/s10854-021-05456-x

Flexible MXene‐Based Composite Films: Synthesis, Modification, and Applications as Electrodes of Supercapacitors

Yijia Luo, Wenxiu Que, Xiaoqing Bin, Chenji Xia, Bingshan Kong, Bowen Gao and Ling Bing Kong

Small, 2022, 18
DOI: 10.1002/smll.202201290

Prediction of Tool Shape in Electrical Discharge Machining of EN31 Steel Using Machine Learning Techniques

Arminder Singh Walia, Vineet Srivastava, Prashant S Rana, Nalin Somani, Nitin Kumar Gupta, Gurminder Singh, Danil Yurievich Pimenov, Tadeusz Mikolajczyk and Navneet Khanna

Metals, 2021, 11, 1668
DOI: 10.3390/met11111668

Conducting polymer PEDOTs for biomedical application

Meng Zhou, Ling Zhu, Siying An and Shuai Chen

Synthetic Metals, 2024, 307, 117700
DOI: 10.1016/j.synthmet.2024.117700

Recent advances in conductive materials for printed electronics and printed technology

Shenghai Ke, Yinan Liu, Feng Chen, Xiaohui Ni and Yaxi Ma

Polymers for Advanced Techs, 2024, 35
DOI: 10.1002/pat.6581

Theory of Anisotropic Metal Nanostructures

Kristen A. Fichthorn

Chem. Rev., 2023, 123, 4146
DOI: 10.1021/acs.chemrev.2c00831

Printed Zinc Tin Oxide Memristors for Reservoir Computing

Raquel Azevedo Martins, Carlos Silva, Jonas Deuermeier, Gianluca Milano, Mateo Rosero‐Realpe, Carolina Parreira, Elvira Fortunato, Rodrigo Martins, Asal Kiazadeh and Emanuel Carlos

Advanced Intelligent Systems, 2026, 8
DOI: 10.1002/aisy.202500450

Process and mechanism of depositing silver paste spot via laser-induced forward transfer

Jianming Xiang, Yu Deng, Zihong Cen, Zhimin Zeng, Shuyou Li and Gary C. P. Tsui

Journal of Laser Applications, 2024, 36
DOI: 10.2351/7.0001400

Ink formulation of phosphorescent emitter with mixed host and its application in inkjet-printed organic light-emitting devices

Shiyan Chen, Wei Wang, Zhongjin Zhang, Zhuoran Li, Kai Fan, Zixuan Zhang, Lihui Liu and Shufen Chen

Organic Electronics, 2023, 122, 106880
DOI: 10.1016/j.orgel.2023.106880

A Review on Sustainable Inks for Printed Electronics: Materials for Conductive, Dielectric and Piezoelectric Sustainable Inks

Leire Sanchez-Duenas, Estibaliz Gomez, Mikel Larrañaga, Miren Blanco, Amaia M. Goitandia, Estibaliz Aranzabe and José Luis Vilas-Vilela

Materials, 2023, 16, 3940
DOI: 10.3390/ma16113940

A Review of the Use of Carbon Nanotubes and Graphene-Based Sensors for the Detection of Aflatoxin M1 Compounds in Milk

Jingrong Gao, Shan He, Anindya Nag and Jonathan Woon Chung Wong

Sensors, 2021, 21, 3602
DOI: 10.3390/s21113602

Fabrication of Silicon Carbide Nanoparticles Using Pulsed Laser Ablation in Liquid and Viscosity Optimization via Solvent Tuning

Saeid Heidarinassab, Anesu Nyabadza, Inam Ul Ahad and Dermot Brabazon

Materials, 2024, 17, 4527
DOI: 10.3390/ma17184527

“Assessing exposure of printing factory workers in thailand to selected heavy metals using urine and hair as non-invasive matrices”

Patthrarawalai Sirinara, Yupin Patarapongsant, Siwaporn Nilyai, Kanidta Sooklert, Thasinas Dissayabutra, Rojrit Rojanathanes and Amornpun Sereemaspun

BMC Public Health, 2023, 23
DOI: 10.1186/s12889-022-14807-0

Recent Advances in Metal-Oxide Thin-Film Transistors: Flexible/Stretchable Devices, Integrated Circuits, Biosensors, and Neuromorphic Applications

Yunchae Jeon, Donghyun Lee and Hocheon Yoo

Coatings, 2022, 12, 204
DOI: 10.3390/coatings12020204

Recent Progress in 3D Printed Mold-Based Sensors

Shan He, Shilun Feng, Anindya Nag, Nasrin Afsarimanesh, Tao Han and Subhas Chandra Mukhopadhyay

Sensors, 2020, 20, 703
DOI: 10.3390/s20030703

Multi-material vat photopolymerization 3D printing: a review of mechanisms and applications

Saroj Subedi, Siying Liu, Wenbo Wang, S. M. Abu Naser Shovon, Xiangfan Chen and Henry Oliver T. Ware

npj Adv. Manuf., 2024, 1
DOI: 10.1038/s44334-024-00005-w

Functionalized Gold Nanoparticles with a Cohesion Enhancer for Robust Flexible Electrodes

Jisun Im, Gustavo F. Trindade, Tien Thuy Quach, Ali Sohaib, Feiran Wang, Jonathan Austin, Lyudmila Turyanska, Clive J. Roberts, Ricky Wildman, Richard Hague and Christopher Tuck

ACS Appl. Nano Mater., 2022, 5, 6708
DOI: 10.1021/acsanm.2c00742

Inkjet-printed thin-film transistors using surfactant-based transition-metal dichalcogenide nanocomposites suspended in polymeric semiconductors

Hyunwoo Choi, Wontae Park, Yebin Lee, Kam C Tam and William S Wong

Flex. Print. Electron., 2024, 9, 015004
DOI: 10.1088/2058-8585/ad1e2b

Printable devices for neurotechnology

Rita Matta, David Moreau and Rodney O’Connor

Front. Neurosci., 2024, 18
DOI: 10.3389/fnins.2024.1332827

Flexible Copper Metal Circuits via Desktop Laser Printed Masks

Rashmi Ghosh, Xiaoya Liu and Matthew Z. Yates

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202200400

Dual-reductant synthesis of nickel nanoparticles for use in screen-printing conductive paste

Shengnan Liu, Sze Kee Tam and Ka Ming Ng

J Nanopart Res, 2021, 23
DOI: 10.1007/s11051-021-05191-8

Assembly, Properties, and Application of Ordered Group II–VI and IV–VI Colloidal Semiconductor Nanoparticle Films

Mathias Micheel, Raktim Baruah, Krishan Kumar and Maria Wächtler

Adv Materials Inter, 2022, 9
DOI: 10.1002/admi.202201039

Semi-transparent 3D microelectrodes buried in fused silica for photonics applications

S. S. K. Guduru, S. G. Bucella, S. Bonfadini, K. C. Vishnubhatla, M. Caironi and L. Criante

Opt. Express, 2021, 29, 27149
DOI: 10.1364/OE.433330

Plasmonic Cross‐Reactive Sensing Noses and Tongues

Irene Calderon, I. Brian Becerril‐Castro, Tolga Zorlu, Burak Özdemir, Eduardo García‐Rico, Vladimir A. Baulin and Ramon A. Alvarez‐Puebla

ChemPlusChem, 2024, 89
DOI: 10.1002/cplu.202400210

Dopant-free dipole-type hole transport materials with alkali cation for enhanced stability in perovskite solar cells

Hyunji Kim, Maki Hashimoto, Yuya Ohkura, Toshiaki Ito, Hideaki Takahashi, Hiroshi Sato, Jinyoung Kim, Naoyuki Shibayama, Tsutomu Miyasaka and Gyu Min Kim

Chemical Engineering Journal, 2025, 505, 159571
DOI: 10.1016/j.cej.2025.159571

Facile preparation of particle-free hybrid amine silver ink with synergistic effect for low-resistivity flexible films

Liying Zhang, Guoyou Gan, Peiyuan Fan, Yunchuan Liu, Tianwei Wang, Weichao Li and Jinghong Du

J Coat Technol Res, 2023, 20, 1845
DOI: 10.1007/s11998-023-00781-8

Investigation of Insertion Loss in Inkjet-Printed Coplanar Waveguide Based on Drying Temperature

Jun Ho Yu, Sung-min Sim, Jin W. Choi, Sang-Ho Lee and Jung-Mu Kim

J. Electromagn. Eng. Sci, 2025, 25, 550
DOI: 10.26866/jees.2025.6.r.328

Fully Printed Low-Voltage Field-Effect Transistor Biosensor Array for One-Drop Detection of Shewanella onedensis MR-1 Bacteria

Qingqing Sun, Chao Ma, Weipeng Li, Xiaomeng Li, Kenji Sakamoto, Xuying Liu, Akihiro Okamoto and Takeo Minari

ACS Appl. Electron. Mater., 2023, 5, 2558
DOI: 10.1021/acsaelm.3c00019

Printing technologies for monitoring crop health

David Panáček, Vojtěch Kupka, Martin-Alex Nalepa, Ivan Dědek, Ruslan Álvarez-Diduk, Selin Olenik, Jose Flauzino, Jan Zdražil, Petr Jakubec, Lukáš Zdražil, Lukáš Spíchal, Keval K. Sonigara, Radek Zbořil, Martin Pumera, Arben Merkoçi, Joseph Wang, Nuria De Diego, Firat Güder and Michal Otyepka

Nat Commun, 2026, 17
DOI: 10.1038/s41467-026-68778-6

AgNP-MWCNT nanocomposites for flexible strain sensors: Comprehensive insights into green synthesis, advanced fabrication technologies, and emerging applications

Aamir Khan, Peerawat Prathumrat, Chutiwat Likitaporn, Tawan Wongsalam, Nattapon Tanalue, Nichakan Nichakornpong and Manunya Okhawilai

Synthetic Metals, 2026, 316, 118003
DOI: 10.1016/j.synthmet.2025.118003

Electronic nose system based on a functionalized capacitive micromachined ultrasonic transducer (CMUT) array for selective detection of plant volatiles

Erdem Şennik, Fatih Erden, Nasie Constantino, YeonYee Oh, Ralph A. Dean and Ömer Oralkan

Sensors and Actuators B: Chemical, 2021, 341, 130001
DOI: 10.1016/j.snb.2021.130001

Inkjet-printed low temperature co-fired ceramics: process development for customized LTCC

Jonas Jäger, Martin Ihle, Kerstin Gläser and André Zimmermann

Flex. Print. Electron., 2024, 9, 025022
DOI: 10.1088/2058-8585/ad59b3

Digital LIGA: exploitation of droplet-on-demand inkjet printing to fabricate complex mechanical structures by electroforming

Annelies Sels, Remo Blum, Rajasundar Chandran, Enrica Montinaro, Jan Schildknecht, Mickael Chabart and Vivek Subramanian

J. Micromech. Microeng., 2023, 33, 075001
DOI: 10.1088/1361-6439/acd3fb

Photochromic and thermochromic inks based on supramolecular complexes of viologens and cyclodextrin for printable anticounterfeiting applications

Fan Zhou, Yilin Zhang, Hao Zong and Gang Zhou

Chemical Engineering Journal, 2025, 507, 160650
DOI: 10.1016/j.cej.2025.160650

Multifunctional flexible conductive filament for human motion detection and electrothermal

Sirui Tan, Junsheng Wang, Wanhui Jin, Qian Zhang, Zhong Zhao, Daiqi Li, Deshan Cheng, Shuguang Bi, Jianhua Ran, Guangming Cai and Xin Wang

Composites Communications, 2023, 37, 101446
DOI: 10.1016/j.coco.2022.101446

Sprayable perfluoropolyether / poly(ethylene glycol) segmented polyurethane coatings with micron-scale phase separated 3D structure

Andrew P. Nowak, Adam F. Gross, Elena Sherman, April R. Rodriguez, Michael Ventuleth, Ashley M. Nelson, Adam Sorensen, Russell Mott and Jason Graetz

Polymer, 2021, 212, 123279
DOI: 10.1016/j.polymer.2020.123279

Drop impact on solids: contact-angle hysteresis filters impact energy into modal vibrations

Vanessa R. Kern, Joshua B. Bostwick and Paul H. Steen

J. Fluid Mech., 2021, 923
DOI: 10.1017/jfm.2021.547

3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications

Weiheng Xu, Sayli Jambhulkar, Dharneedar Ravichandran, Yuxiang Zhu, Mounika Kakarla, Qiong Nian, Bruno Azeredo, Xiangfan Chen, Kailong Jin, Brent Vernon, David G. Lott, Jeffrey L. Cornella, Orit Shefi, Guillaume Miquelard‐Garnier, Yang Yang and Kenan Song

Small, 2021, 17
DOI: 10.1002/smll.202100817

Nanofluid Drop Impact on Heated Surfaces

Xiaotian Ma, Ahmed Aldhaleai, Lihui Liu and Peichun Amy Tsai

Langmuir, 2024
DOI: 10.1021/acs.langmuir.3c03343

Sustainable bioelectronics fabrication through photo-induced swelling of green hydrogels

Sachin Agate, Lucian Lucia and Lokendra Pal

Materials Today Electronics, 2024, 7, 100088
DOI: 10.1016/j.mtelec.2023.100088

Flexible ammonium ion-selective electrode based on inkjet-printed graphene solid contact

Sara Krivačić, Željka Boček, Marko Zubak, Vedran Kojić and Petar Kassal

Talanta, 2024, 279, 126614
DOI: 10.1016/j.talanta.2024.126614

A Review of the Metal Additive Manufacturing Processes

Mohaddeseh Tebianian, Sara Aghaie, Nazanin Razavi Jafari, Seyed Elmi Hosseini, António Pereira, Fábio Fernandes, Mojtaba Farbakhti, Chao Chen and Yuanming Huo

Materials, 2023, 16, 7514
DOI: 10.3390/ma16247514