Issue 5, 2023

Functionalized polymer modified buried interface for enhanced efficiency and stability of perovskite solar cells

Abstract

Although great progress has been made in perovskite solar cells (PCSs), further development of PCSs is hindered by a large number of defects, nonradiative recombination, and mysterious stresses. Here, we propose a new interfacial strategy by introducing a new polymer material named povidone-iodine (PV-I) as a buffer layer. A series of studies indicate that the introduced buffer layer can form a strong chemical interaction with SnO2 and the perovskite, which can not only passivate the defects of the two functional layers but also strengthen the interfacial connection. The reduction of film defects and the enhancement of interface connection are beneficial to the extraction and transport of the carrier. In addition, the introduction of a buffer layer releases the interfacial stress. Ultimately, we achieved attractive efficiency (22.02%, 0.1 cm2) and considerable long-term stability (after aging 500 h, the target device still retains 81% of its original PCE). The excellent performance of the device indicates that this strategy can be used as an effective control method for perovskite solar cells to facilitate their commercialization.

Graphical abstract: Functionalized polymer modified buried interface for enhanced efficiency and stability of perovskite solar cells

Supplementary files

Article information

Article type
Communication
Submitted
09 Nov 2022
Accepted
15 Des 2022
First published
22 Des 2022

Nanoscale, 2023,15, 2054-2060

Functionalized polymer modified buried interface for enhanced efficiency and stability of perovskite solar cells

H. Zou, H. Bi, Y. Chen, M. Guo, W. Hou, P. Su, K. Zhou, C. Yang, X. Gong, L. Xiao and L. Liu, Nanoscale, 2023, 15, 2054 DOI: 10.1039/D2NR06290A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements