Issue 6, 2019

Inter-particle migration of Cu ions in physically mixed Cu-SSZ-13 and H-SSZ-13 treated by hydrothermal aging

Abstract

Physically mixed Cu-SSZ-13 and H-SSZ-13 catalysts were prepared using two different methods to control the extent of contact between the particles; one was mixed by grinding the particles that were supposed to be in close contact (PM-C) with a mortar, and the other was a mixture of granules that were in loose contact (PM-L). After hydrothermal treatment at 550 °C for 4 hours, we observed that the two physically mixed catalysts had different distributions of copper (Cu) species and catalytic activities although the Cu loadings were the same. The characteristics of the Cu species were investigated by H2-TPR, NH3-TPD, DRIFT and EPR analysis. The catalytic activities were evaluated by the NH3-SCR reaction. The differences in the distribution of Cu species are attributed to the migration of Cu ions via direct contact between particles in PM-C because they prefer to be located at more energetically stable sites, which in this study is referred to as ‘inter-particle migration’. This research reports the migration of copper ions over much longer distances than previously reported that is regarded as an important factor for deactivation due to hydrothermal aging.

Graphical abstract: Inter-particle migration of Cu ions in physically mixed Cu-SSZ-13 and H-SSZ-13 treated by hydrothermal aging

Supplementary files

Article information

Article type
Paper
Submitted
30 Okt 2018
Accepted
05 Feb 2019
First published
05 Feb 2019

React. Chem. Eng., 2019,4, 1059-1066

Inter-particle migration of Cu ions in physically mixed Cu-SSZ-13 and H-SSZ-13 treated by hydrothermal aging

H. Lee, I. Song, S. W. Jeon and D. H. Kim, React. Chem. Eng., 2019, 4, 1059 DOI: 10.1039/C8RE00281A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements