Issue 7, 2017

Direct synthesis of a carbon nanotube interpenetrated doped porous carbon alloy as a durable Pt-free electrocatalyst for the oxygen reduction reaction in an alkaline medium

Abstract

Direct synthesis of highly durable carbon nanotube interpenetrated porous carbon alloy electrocatalysts for the oxygen reduction reaction (ORR) from a single precursor, trimetallic zeolitic imidazole framework (t-ZIF), is reported. The use of a single precursor improves the uniform distribution of active reaction centres which is crucial for ORR catalysts. The t-ZIF has Fe, Co and Zn metal centres and 2-methylimidazole as a ligand. Carbonisation of the t-ZIF under an inert atmosphere produces nitrogen and Fe/Co–Nx doped carbon/carbon nanotubes alloyed with metal/metal oxide particles encased inside the carbon structures (FeCo-NCZ). The presence of Zn in the t-ZIF induces porosity in carbon during the carbonisation process. The peculiar morphology with a reasonably high surface area provides efficient mass transport and interpenetrated carbon nanotube assisted fast electron transport in the catalyst. X-ray photoelectron spectroscopy reveals that FeCo-NCZ is enriched with different possible active reaction centres such as pyridinic, graphitic and Fe/Co–Nx type nitrogen coordination on the catalyst surface. The ORR activity of FeCo-NCZ in oxygen saturated 0.1 M KOH was comparable to/higher than that of the reference Pt/C catalyst. The displayed onset potential (1.04 V vs. the RHE) and half-wave potential (0.91 V vs. the RHE) of FeCo-NCZ are more positive compared to those of Pt/C and other control-samples. It is noteworthy that the dioxygen reduction kinetics of FeCo-NCZ are comparable to those of Pt/C as evident from the Tafel slope and oxygen reduction follows a four electron pathway. More interestingly, FeCo-NCZ shows better fuel tolerance and electrochemical stability even at 60 °C compared to Pt/C under alkaline conditions.

Graphical abstract: Direct synthesis of a carbon nanotube interpenetrated doped porous carbon alloy as a durable Pt-free electrocatalyst for the oxygen reduction reaction in an alkaline medium

Supplementary files

Article information

Article type
Paper
Submitted
12 Mei 2017
Accepted
19 Jun 2017
First published
21 Jun 2017

Sustainable Energy Fuels, 2017,1, 1524-1532

Direct synthesis of a carbon nanotube interpenetrated doped porous carbon alloy as a durable Pt-free electrocatalyst for the oxygen reduction reaction in an alkaline medium

S. M. Unni, G. M. Anilkumar, M. Matsumoto, T. Tamaki, H. Imai and T. Yamaguchi, Sustainable Energy Fuels, 2017, 1, 1524 DOI: 10.1039/C7SE00249A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements