Issue 8, 2017

Efficient perovskite solar cells by combination use of Au nanoparticles and insulating metal oxide

Abstract

Achieving high open-circuit voltage and high short-circuit current density simultaneously is a big challenge in the development of highly efficient perovskite solar cells, due to the complex excitonic nature of hybrid organic–inorganic semiconductors. Herein, we developed a facile and effective method to fabricate efficient plasmonic PSC devices. The solar cells were prepared by incorporating Au nanoparticles (NPs) into mesoporous TiO2 films and depositing a MgO passivation film on the Au NP-modified mesoporous titania via wet spinning and pyrolysis of magnesium salt. The PSCs obtained by combining Au NPs and MgO demonstrated a high power conversion efficiency of 16.1%, with both a high open-circuit voltage of 1.09 V and a high short-circuit current density of 21.76 mA cm−2. The device achieved a 34.2% improvement in the power conversion efficiency compared with a device based on pure TiO2. Moreover, a significant improvement of the UV stability in the perovskite solar cell was achieved due to the combined use of Au NPs and insulating MgO. The fundamental optics and physics behind the regulation of energy flow in the perovskite solar cell and the concept of using Au NPs and MgO to improve the device performance were explored. The results indicate that the combined use of Au NPs and a MgO passivation film is an effective way to design high performance and high stability organic–inorganic perovskite photovoltaic materials.

Graphical abstract: Efficient perovskite solar cells by combination use of Au nanoparticles and insulating metal oxide

Article information

Article type
Paper
Submitted
29 Des 2016
Accepted
26 Jan 2017
First published
27 Jan 2017

Nanoscale, 2017,9, 2852-2864

Efficient perovskite solar cells by combination use of Au nanoparticles and insulating metal oxide

C. Zhang, Q. Luo, J. Shi, L. Yue, Z. Wang, X. Chen and S. Huang, Nanoscale, 2017, 9, 2852 DOI: 10.1039/C6NR09972F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements