Issue 31, 2017

Natural extracted aerogels with inherent anisotropy and their 3D printing assisted biomedical applications

Abstract

Exemplified with jackfruit and sugarcane, natural extracted aerogels with inherent structural anisotropy were investigated for the first time. With the help of nano-modification, the dual liquid/current directing capability of the Ag decorated jackfruit aerogel was discovered. This interesting material was then applied as the core component of a 3D printed wearable device for intelligent wound management. The as-prepared ultra-light (<10 g) wearable device could provide drainage diversion, wound warning and triple antibacterial treatment in a continuous and automatic manner.

Graphical abstract: Natural extracted aerogels with inherent anisotropy and their 3D printing assisted biomedical applications

Supplementary files

Article information

Article type
Communication
Submitted
19 Mei 2017
Accepted
21 Jun 2017
First published
22 Jun 2017

J. Mater. Chem. B, 2017,5, 6217-6220

Natural extracted aerogels with inherent anisotropy and their 3D printing assisted biomedical applications

L. Dong, C. Liu, F. Yu, X. Ding, T. Li, Q. Hu, M. Liu, F. Fang, H. Xin and X. Wang, J. Mater. Chem. B, 2017, 5, 6217 DOI: 10.1039/C7TB01377A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements