Issue 4, 2020

Zn-Modified Co@N–C composites with adjusted Co particle size as catalysts for the efficient electroreduction of CO2

Abstract

In this paper, a sequence of Zn-modified Co@N–C composites are designed and developed via the direct annealing of Zn–Co bimetallic zeolitic imidazolate framework materials with different Co/Zn ratios and at different pyrolysis temperatures. As proved by the various measurements made, the size of the Co particles in the composites could be successfully adjusted from 18 nm to 6 nm. In addition, with a decrease in particle size the Co particles become covered by carbon layers, and the specific surface area and number of Co–N–C bonds are successfully increased. As a result, the current density and CO faradaic efficiency (FE(CO)%) in the electrochemical CO2 reduction reaction gradually improved (from 1.8 to 4.2 mA cm−2 for current density and from 25% to 60% for FE(CO)%) with a decrease in the Co particle size. Meanwhile, the ratio of H2/CO in the obtained syngas could be regulated in the range 5 : 1 to 1 : 1.5. The Zn–Co@N–C-25 composite displayed optimal activity, and there was no obvious decrease in catalytic performance, even after 40 h, implying excellent stability for the Zn–Co@N–C catalyst.

Graphical abstract: Zn-Modified Co@N–C composites with adjusted Co particle size as catalysts for the efficient electroreduction of CO2

Supplementary files

Article information

Article type
Paper
Submitted
31 okt 2019
Accepted
26 dec 2019
First published
27 dec 2019

Catal. Sci. Technol., 2020,10, 967-977

Zn-Modified Co@N–C composites with adjusted Co particle size as catalysts for the efficient electroreduction of CO2

Z. Miao, W. Liu, Y. Zhao, F. Wang, J. Meng, M. Liang, X. Wu, J. Zhao, S. Zhuo and J. Zhou, Catal. Sci. Technol., 2020, 10, 967 DOI: 10.1039/C9CY02203A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements