Issue 15, 2023

Screen printing of stretchable silver nanomaterial inks for a stable human–machine interface

Abstract

Human–machine interfaces are widely utilized for medical rehabilitation and intelligent entertainment. As the information bridge for the human–machine interface, the mechanical and electrical properties of on-skin electrodes are critical for realizing both sensitivity and stability. Screen printing is used to print on-skin electrodes for human–machine interfaces owing to its suitability for large areas, rapid fabrication process, low cost, and effectiveness for the printing of large quantities, as well as the long lifetime, and durable quality of the electrodes. However, the large-scale preparation of stretchable inks for screen printing has limited the development of on-skin electrodes. Hence, a strategy for the large-scale preparation of stretchable silver inks by introducing Ag flakes into commercial Ag inks that contain Ag nanoparticles is proposed, and these inks can be applied to fabricate a conformal on-skin electrode array through screen printing for stable human–machine interfaces. The addition of Ag flakes into Ag nanoparticles endowed the on-skin electrodes with stable and excellent electrical properties for large deformations via mechanical slippage. The conductivity of these on-skin electrodes (with an 80% weight ratio of Ag flakes) could reach up to 1.08 × 105 S m−1 while maintaining the conductivity at 130% strain (conductivity value: 290.12 S m−1). In addition, poly(lipoic acid–tannic acid) (PLTA) provided these stretchable electrodes with high adhesion on the surfaces of both wet and dry skin. Finally, a 3 × 3 conformal on-skin electrode array as well as flexible hardware for signal acquisition and transmission were pasted onto the human forearm to control the movements of a wireless car using an artificial intelligence algorithm.

Graphical abstract: Screen printing of stretchable silver nanomaterial inks for a stable human–machine interface

Supplementary files

Article information

Article type
Communication
Submitted
02 Kol 2023
Accepted
16 Ube 2023
First published
17 Ube 2023

J. Mater. Chem. C, 2023,11, 5009-5017

Screen printing of stretchable silver nanomaterial inks for a stable human–machine interface

Y. Liu, J. Hao, X. Zheng, C. Shi and H. Yang, J. Mater. Chem. C, 2023, 11, 5009 DOI: 10.1039/D3TC00388D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements