Issue 26, 2019

Fabrication of magnesium oxide nanoparticles by solvent alteration and their bactericidal applications

Abstract

The ever-increasing resistance of pathogens towards antibiotics has resulted in the development of novel antibacterial materials. In this work, magnesium oxide nanoparticles were synthesized and the synthesis parameters played an important role in determining the physico-chemical properties of the nanoparticles. Three reaction solvents (water, ethyl alcohol and aqueous cetrimonium-tetrabromide) were employed and the morphological, surface and antibacterial properties of the resultant nanoparticles were compared. The use of ethanol yielded a smaller particle size (∼10 nm) and thus a greater surface area than that of CTAB (∼17 nm) or water (∼28 nm). The antibacterial efficacy of these nanoparticles was proven by the increase in cell reduction against both S. aureus and E. coli. About 3-log reduction in the bacterial count was observed using a concentration of 5 mg ml−1 of MgO synthesized in ethanol. The logistic growth model equation was used to fit the growth kinetics of the treated bacteria and the parameters also changed significantly with the solvent. The generation of reactive oxygen species was found to be time- and concentration-dependent and the haemolysis of the nanoparticles was much lower than the allowable limit. Confocal and scanning electron microscopies were employed for morphological insights into the treated bacteria, thus proving the use of these nanoparticles in biomedicine.

Graphical abstract: Fabrication of magnesium oxide nanoparticles by solvent alteration and their bactericidal applications

Supplementary files

Article information

Article type
Paper
Submitted
22 Mme 2019
Accepted
22 Mot 2019
First published
23 Mot 2019

J. Mater. Chem. B, 2019,7, 4141-4152

Fabrication of magnesium oxide nanoparticles by solvent alteration and their bactericidal applications

P. Bhattacharya, S. Swain, L. Giri and S. Neogi, J. Mater. Chem. B, 2019, 7, 4141 DOI: 10.1039/C9TB00782B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements