Issue 45, 2023

Material selection and performance optimization strategies for a wearable friction nanogenerator (W-TENG)

Abstract

With developments in science and technology, wearable electronic products are increasingly used in daily lives. The growing demand for energy highly necessitates developing new energy sources. As a modification of traditional friction nanogenerators (TENGs), wearable friction nanogenerators (W-TENGs) can convert mechanical energy from human movements into electricity. The working principle and primary working mode of the W-TENG are elucidated in this paper. The triboelectric materials commonly used for W-TENGs are selected based on the type of friction materials to achieve a better triboelectric output. To improve the triboelectric output, some optimization suggestions for triboelectric materials are put forward: increasing the surface charge density and reducing the decline in triboelectric charge to enhance the output performance of the W-TENG fundamentally. Finally, the prospects and challenges of the W-TENG are analyzed, and it is hoped that this review can promote the development of the W-TENG and provide clean and sustainable energy solutions for wearable bioelectronic systems.

Graphical abstract: Material selection and performance optimization strategies for a wearable friction nanogenerator (W-TENG)

Article information

Article type
Review Article
Submitted
07 Pha 2023
Accepted
12 Mph 2023
First published
25 Mph 2023

J. Mater. Chem. A, 2023,11, 24454-24481

Material selection and performance optimization strategies for a wearable friction nanogenerator (W-TENG)

H. Zhang, X. Gong and X. Li, J. Mater. Chem. A, 2023, 11, 24454 DOI: 10.1039/D3TA04710E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements