Issue 21, 2019

Wide-angle lasing from photonic crystal nanostructures of a liquid-crystalline blue phase

Abstract

Wide-angle lasing emitting from dye-doped blue-phase liquid crystals (DDBPLCs), which are analogous to photonic crystals, have been demonstrated to selectively reflect visible light. Herein, the best mixed system ZTO-5024LA+S811 was chosen as it required minimal applied voltage for wavelength tuning and exhibited largest platelets of several hundred micrometers with homogeneous colors in the BP lattice; the BP sample integrated with in-plane switching (IPS) electrodes, which enhanced the electric field directionally, demonstrated wideband tunability of Bragg light reflection up to around 70 nm when measured at various detection angles. The results show that to obtain the same amount of reflection peak shift for the 0° detection angle, lowest voltage was required because the largest electrostriction effect stretched the photonic band gap (PBG) structure under the transverse electric field constituted by the IPS electrodes. By the addition of a laser dye, PYRROMETH-597, to the BP sample, the lasing action was achieved with wavelength tunable over 55 nm for each detection angle. This miniaturized and simple design presents significant possibilities for easy packaging into displays and the fabrication of spatially wavelength-tunable photonic devices.

Graphical abstract: Wide-angle lasing from photonic crystal nanostructures of a liquid-crystalline blue phase

  • This article is part of the themed collection: Photonics

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
12 Ube 2019
Accepted
25 Mme 2019
First published
26 Mme 2019

J. Mater. Chem. C, 2019,7, 6433-6439

Wide-angle lasing from photonic crystal nanostructures of a liquid-crystalline blue phase

G. Zhuo, S. Huang and S. Lin, J. Mater. Chem. C, 2019, 7, 6433 DOI: 10.1039/C9TC01350D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements