Issue 32, 2016

The effect of barium sulfate-doped lead oxide as a positive active material on the performance of lead acid batteries

Abstract

Barium sulfate (BaSO4) is a common impurity in recycled lead paste that is challenging to eliminate completely during hydrometallurgical recycling of spent lead acid batteries, so the effect of this impurity in positive active materials on the performance of recycled lead acid batteries was investigated. The BaSO4 doped lead oxide composite was used as a positive active material in positive plates of lead acid batteries with theoretical capacities of 2.0 A h. BaSO4 was retained in the solid phase throughout the battery fabrication process. Different BaSO4 dosages affected the phase of the positive plates during the curing process, with the highest content of metallic lead obtained at a BaSO4 dosage of 0.06 wt%. Morphology analysis indicated that aggregates were formed in the positive plates and the particles became rougher with increasing addition of BaSO4 during the formation process. BaSO4 also demonstrated a large impact on charge/discharge cycles with 100% DOD in battery testing. Analysis of disassembled failed batteries indicated that the expansion and shedding-off of the positive active material were mainly responsible for the failure of these batteries, and this could be attributed to the non-uniform growth of lead oxide on the BaSO4 nucleus, and the accumulation of internal stress.

Graphical abstract: The effect of barium sulfate-doped lead oxide as a positive active material on the performance of lead acid batteries

Supplementary files

Article information

Article type
Paper
Submitted
21 jan 2016
Accepted
04 mar 2016
First published
07 mar 2016

RSC Adv., 2016,6, 27205-27212

The effect of barium sulfate-doped lead oxide as a positive active material on the performance of lead acid batteries

X. Yuan, J. Hu, J. Xu, Y. Hu, W. Zhang, J. Dong, S. Liang, H. Hou, X. Wu and J. Yang, RSC Adv., 2016, 6, 27205 DOI: 10.1039/C6RA01873D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements