Issue 3, 2015

Enhanced gas-sorption properties of a high surface area, ultramicroporous magnesium formate

Abstract

The direct solvothermal reaction of Mg(NO3)2·6H2O in dimethylformamide at 130 °C leads to the formation of highly crystalline α-[Mg3(O2CH)6] with an expanded unit cell. Successful pore activation was performed after heating the material at 240 °C under dynamic vacuum. In contrast to literature reports, the pores in the activated solid are accessible to nitrogen molecules and the corresponding BET surface area is 496 m2 g−1, very close to the geometric area calculated from the single crystal structure. A detailed gas-sorption study (N2, Ar, H2, CO2, CH4 and NH3) is reported. The material is ammonia stable showing a reversible uptake of 5.4 mmol g−1 at 298 K, while the corresponding CO2 uptake is 2.2 mmol g−1 with moderate CO2/CH4 (4.6) selectivity but high CO2/N2 (23) and CH4/N2 (5.2) selectivity. The latter is among the highest values reported to date in the entire family of porous materials. The H2 uptake at 77 K is 1.2 wt% which is the highest among the reported values for various magnesium formates.

Graphical abstract: Enhanced gas-sorption properties of a high surface area, ultramicroporous magnesium formate

Supplementary files

Article information

Article type
Paper
Submitted
12 avg 2014
Accepted
18 nov 2014
First published
24 nov 2014

CrystEngComm, 2015,17, 532-539

Author version available

Enhanced gas-sorption properties of a high surface area, ultramicroporous magnesium formate

I. Spanopoulos, I. Bratsos, Ch. Tampaxis, A. Kourtellaris, A. Tasiopoulos, G. Charalambopoulou, T. A. Steriotis and P. N. Trikalitis, CrystEngComm, 2015, 17, 532 DOI: 10.1039/C4CE01667J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements