Issue 41, 2013

Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures

Abstract

A two-step deposition technique is used for preparing CH3NH3PbI3 perovskite solar cells. Using ZrO2 and TiO2 as a mesoporous layer, we obtain an efficiency of 10.8% and 9.5%, respectively, under 1000 W m−2 illumination. The ZrO2 based solar cell shows higher photovoltage and longer electron lifetime than the TiO2 based solar cell.

Graphical abstract: Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures

  • This article is part of the themed collection: Solar energy

Supplementary files

Article information

Article type
Communication
Submitted
26 jun 2013
Accepted
18 jul 2013
First published
24 jul 2013

RSC Adv., 2013,3, 18762-18766

Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures

D. Bi, S. Moon, L. Häggman, G. Boschloo, L. Yang, E. M. J. Johansson, M. K. Nazeeruddin, M. Grätzel and A. Hagfeldt, RSC Adv., 2013, 3, 18762 DOI: 10.1039/C3RA43228A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements