Issue 14, 2023

A novel two-zone sequential optimization model for pyro-oxidation and reduction reactions in a downdraft gasifier

Abstract

A robust mathematical model is developed for prediction and optimization of syngas in a downdraft gasifier. The gasifier is modelled for two distinct zones i.e. pyro-oxidation zone (zone I) and reduction zone (zone II). A thermodynamic equilibrium model is implemented for the prediction of syngas composition in zone I, while zone II is modelled by implementing a finite kinetic approach. For each zone five control parameters are identified for sequential maximization of carbon conversion efficiency (CCE). Maximization of H2 and CO yield in syngas and minimization of char contaminants is the main objective in the present analysis. The Taguchi method is implemented for process optimization while ANOVA is used to determine the most influential parameter. The optimized model gives 17.79% improvement in calorific value of syngas, while the final CCE obtained was 96.04%. For zone I the equivalence ratio was found to be the most influential parameter with 97% contribution, while for zone II the reduction zone temperature was the most influential parameter with 88% contribution.

Graphical abstract: A novel two-zone sequential optimization model for pyro-oxidation and reduction reactions in a downdraft gasifier

Supplementary files

Article information

Article type
Paper
Submitted
31 jan 2023
Accepted
09 mar 2023
First published
20 mar 2023
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2023,13, 9128-9141

A novel two-zone sequential optimization model for pyro-oxidation and reduction reactions in a downdraft gasifier

R. Palange and M. Krishnan, RSC Adv., 2023, 13, 9128 DOI: 10.1039/D3RA00667K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements