Issue 4, 2023

The spectroscopic study of metallic lines emitted from a pulsed atmospheric pressure gas discharge source with brass and stainless steel cathodes

Abstract

The optical emission spectroscopy study of a pulsed atmospheric pressure discharge source in argon and an argon–hydrogen mixture is performed. The discharge source has needle-to-cylinder configuration with cathodes made of brass and stainless steel. Numerous metallic lines are identified in the discharge spectra (Cu, Zn, Fe, Cr, V, and W) in the 260–800 nm spectral range. A thorough study of electron temperature Te by means of Fe I line intensity distribution is performed. The results showed that Te = 7000 K–9000 K, which was also confirmed using Fe II and Cu I lines. The agreement with the Te results obtained using the ionic-to-atomic line ratio method is achieved. Several broad spectral lines originating from the cathode material (Cu I, Cu II, and Fe I) are revealed in the discharge spectra and described using an appropriate fitting function. For those with reliable spectral line broadening data (e.g. Cu I 448.0 nm and Fe I 538.3 nm lines), the electron number density Ne diagnostics procedure is applied. By means of a spectral line deconvolution procedure, the values Ne = (0.9–1.5) × 1016 cm−3 and Ne = (7–10) × 1016 cm−3 are measured from the cathode regions of the discharge. The agreement between the Ne results obtained from Stark halfwidth and Stark shift results is achieved. The addition of hydrogen (3% by vol.) changed the yield of metallic lines which is more emphasized in the case of the stainless steel cathode.

Graphical abstract: The spectroscopic study of metallic lines emitted from a pulsed atmospheric pressure gas discharge source with brass and stainless steel cathodes

Article information

Article type
Paper
Submitted
27 dec 2022
Accepted
10 feb 2023
First published
10 feb 2023

J. Anal. At. Spectrom., 2023,38, 865-872

The spectroscopic study of metallic lines emitted from a pulsed atmospheric pressure gas discharge source with brass and stainless steel cathodes

J. Jovović, J. Anal. At. Spectrom., 2023, 38, 865 DOI: 10.1039/D2JA00429A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements