Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: 4D synchrotron microtomography and pore-network modelling for direct in situ capillary flow visualization in 3D printed microfluidic channels
Agnese
Piovesan
a,
Tim
Van De Looverbosch
a,
Pieter
Verboven
*a,
Clement
Achille
b,
Cesar
Parra Cabrera
b,
Elodie
Boller
c,
Yin
Cheng
c,
Rob
Ameloot
b and
Bart
Nicolai
a
aDivision BIOSYST-MeBioS, KU Leuven – University of Leuven, Willem de Croylaan 42, Box 3001, Leuven, Belgium. E-mail: pieter.verboven@kuleuven.be; Tel: +32 16 321453
bCentre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven – University of Leuven, Celestijnenlaan 200 F, Box 2461, 3001 Leuven, Belgium
cESRF, BP 220 38043 Grenoble Cédex, France
First published on 28th July 2020
Abstract
Correction for ‘4D synchrotron microtomography and pore-network modelling for direct in situ capillary flow visualization in 3D printed microfluidic channels’ by Agnese Piovesan et al., Lab Chip, 2020, 20, 2403–2411, DOI: 10.1039/D0LC00227E.
The height of the channel given in Fig. 1b is incorrect in the original article. The correct height is 2 mm and the corrected figure is shown below.
 | ||
| Fig. 1 3D printed porous bodies. (a) Position of the volume of interest (VOI) (red box) on a CAD drawing of the 3D printed device used in the imbibition experiments at the ESRF, (b) position of the VOI on a cross-section of the channel and (c) microscopic details of the porous structure of the VOI in a reconstructed slice of the synchrotron X-ray CT image field of view (pixel size 1.1 μm). In (a) and (b), the hydrophilic channel is depicted in dark grey while the hydrophobic material is in light grey. No structural difference between the hydrophilic channel and the hydrophobic border exists since the ink-jetting mainly influences the material surface properties. The segmented volume in (c) is used in the PN modelling. It is located close to the edges of the hydrophilic channel to study the flow at the hydrophilic/hydrophobic interface. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2020 |