4D printing in biomedical applications: emerging trends and technologies

Tarun Agarwal, Sung Yun Hann, Irene Chiesa, Haitao Cui, Nehar Celikkin, Simone Micalizzi, Andrea Barbetta, Marco Costantini, Timothy Esworthy, Lijie Grace Zhang, Carmelo De Maria and Tapas Kumar Maiti

J. Mater. Chem. B, 2021, 9, 7608
DOI: 10.1039/D1TB01335A

A no-hysteresis TIPS–pentacene:polystyrene blend-based organic field effect transistor by extruded direct ink writing and the application in a resistive load inverter circuit

Huiwen Bai, Yi Yang, Richard M. Voyles and Robert A. Nawrocki

J. Mater. Chem. C, 2022, 10, 10973
DOI: 10.1039/D2TC00948J

3D printing of metal–organic framework composite materials for clean energy and environmental applications

Eleanor R. Kearns, Rohan Gillespie and Deanna M. D'Alessandro

J. Mater. Chem. A, 2021, 9, 27252
DOI: 10.1039/D1TA08777K

A universal strategy towards 3D printable nanomaterial inks for superior cellular high-loading battery electrodes

Xiaocong Tian, Teng Wang, Hui Ma, Kang Tang, Shuen Hou, Hongyun Jin and Guozhong Cao

J. Mater. Chem. A, 2021, 9, 16086
DOI: 10.1039/D1TA03236D

Versatile carbon superstructures for energy storage

Ziyang Song, Ling Miao, Yaokang Lv, Lihua Gan and Mingxian Liu

J. Mater. Chem. A, 2023, 11, 12434
DOI: 10.1039/D2TA09258A

Simple modification to allow high-efficiency and high-resolution multi-material 3D-printing fabrication of microfluidic devices

Reverson Fernandes Quero, Dosil Pereira de Jesus and José Alberto Fracassi da Silva

Lab Chip, 2023, 23, 3694
DOI: 10.1039/D3LC00356F

Interplay between yielding, ‘recovery’, and strength of yield stress fluids for direct ink writing: new insights from oscillatory rheology

Rishav Agrawal and Esther García-Tuñón

Soft Matter, 2024, 20, 7429
DOI: 10.1039/D4SM00758A

Direct ink writing of recyclable and in situ repairable photothermal polyurethane for sustainable 3D printing development

Mingyue Zheng, Qiuquan Guo, Xiangyu Yin, Nuwansiri Nirosh Getangama, John R. de Bruyn, Junfeng Xiao, Yang Bai, Mei Liu and Jun Yang

J. Mater. Chem. A, 2021, 9, 6981
DOI: 10.1039/D0TA11341G

From metal–organic framework powders to shaped solids: recent developments and challenges

Bakytzhan Yeskendir, Jean-Philippe Dacquin, Yannick Lorgouilloux, Christian Courtois, Sébastien Royer and Jérémy Dhainaut

Mater. Adv., 2021, 2, 7139
DOI: 10.1039/D1MA00630D

Controlled local orientation of 2D nanomaterials in 3D devices: methods and prospects for multifunctional designs and enhanced performance

Hongying He, Lizhi Guan and Hortense Le Ferrand

J. Mater. Chem. A, 2022, 10, 19129
DOI: 10.1039/D2TA01926D

Additive manufacturing of polyaniline blends for lightweight structures with tunable conductivity

Brandon T. DiTullio, Xiao Kuang, Anna M. Österholm, Augustus W. Lang, Patrick J. Kinlen, Natalie Stingelin, H. Jerry Qi and John R. Reynolds

J. Mater. Chem. C, 2023, 11, 4404
DOI: 10.1039/D2TC04183A

3D printed electronics with nanomaterials

Marcin Słoma

Nanoscale, 2023, 15, 5623
DOI: 10.1039/D2NR06771D

Regolith sintering and 3D printing for lunar construction: An extensive review on recent progress

Muhammad Shazwan Suhaizan, Phuong Tran, Ash Exner and Brian G. Falzon

Prog Addit Manuf, 2024, 9, 1715
DOI: 10.1007/s40964-023-00537-1

Boosting CO2 hydrogenation of Fe-based monolithic catalysts via 3D printing technology-induced heat/mass-transfer enhancements

Yang Wang, Shiyuan Lin, Meng Li, Chuanyong Zhu, Hao Yang, Pei Dong, Mingjie Lu, Wenhang Wang, Jianlin Cao, Qiang Liu, Xiang Feng, Han Hu, Noritatsu Tsubaki and Mingbo Wu

Applied Catalysis B: Environmental, 2024, 340, 123211
DOI: 10.1016/j.apcatb.2023.123211

A 3D Printed Morphing Nozzle to Control Fiber Orientation during Composite Additive Manufacturing

Connor D. Armstrong, Noah Todd, Abdullah T. Alsharhan, David I. Bigio and Ryan D. Sochol

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202000829

Stretchable Organic Transistor Based Pressure Sensor Employing a Porous Elastomer Gate Dielectric

Runqiao Song, Ping Ren, Yuxuan Liu, Yong Zhu, Jingyan Dong and Brendan T. O'Connor

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202202140

Flexibly actuated pneumatic extrusion with in-situ monitoring for direct ink writing of heterogeneous and pressure-vulnerable materials

Chaiwuth Sithiwichankit, Setthibhak Suthithanakom, Kantawatchr Chaiprabha, Kai Melde and Ratchatin Chancharoen

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-15164-9

Advances in polymers based Multi-Material Additive-Manufacturing Techniques: State-of-art review on properties and applications

A. García-Collado, J.M. Blanco, Munish Kumar Gupta and R. Dorado-Vicente

Additive Manufacturing, 2022, 50, 102577
DOI: 10.1016/j.addma.2021.102577

Impact of Nanoparticle Size and Loading on Printability of Composite Inks for Direct Ink Writing

Yun Li, Aidan Flynn, Christopher Masternick, Brandon Kolanovic, Bin Li and Bo Li

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401443

Direct ink writing of geopolymer with high spatial resolution and tunable mechanical properties

Siqi Ma, Shuai Fu, Shengjian Zhao, Peigang He, Guoru Ma, Meirong Wang, Dechang Jia and Yu Zhou

Additive Manufacturing, 2021, 46, 102202
DOI: 10.1016/j.addma.2021.102202

Development of polycaprolactone-akermanite nanobiocomposite scaffolds via 3D printing: Structural, mechanical, and biological evaluation for bone tissue regeneration

Rahmatollah Emadi, Pegah Dehghanpour, Yeganeh Salehi and Sayed Reza Mortazavi

Journal of Materials Research and Technology, 2025, 37, 2242
DOI: 10.1016/j.jmrt.2025.06.153

Optimization parameters effects on electrical conductivity of 3D printed circuits fabricated by direct ink writing method using functionalized multiwalled carbon nanotubes and polyvinyl alcohol conductive ink

Syed Riyaz Ahammed, Ayyappan Susila Praveen, Sachin Salunkhe, Sofiane Guessasma and Vishal Naranje

Int. J. Simul. Multidisci. Des. Optim., 2021, 12, 7
DOI: 10.1051/smdo/2021007

Intact Fibrillated 3D-Printed Cellulose Macrofibrils/CaCO3 for Controlled Drug Delivery

Denesh Mohan, Zee Khai Teong, Mohd Shaiful Sajab, Nur Hidayatul Nazirah Kamarudin and Hatika Kaco

Polymers, 2021, 13, 1912
DOI: 10.3390/polym13121912

How 3D printing can boost advances in analytical and bioanalytical chemistry

Adriano Ambrosi and Alessandra Bonanni

Microchim Acta, 2021, 188
DOI: 10.1007/s00604-021-04901-2

3D printing of a versatile applicability shape memory polymer with high strength and high transition temperature

Zhangzhang Tang, Junhui Gong, Pengrui Cao, Liming Tao, Xianqiang Pei, Tingmei Wang, Yaoming Zhang, Qihua Wang and Jianqiang Zhang

Chemical Engineering Journal, 2022, 431, 134211
DOI: 10.1016/j.cej.2021.134211

Additive Nanomanufacturing of Multifunctional Materials and Patterned Structures: A Novel Laser‐Based Dry Printing Process

Zabihollah Ahmadi, Seungjong Lee, Raymond R. Unocic, Nima Shamsaei and Masoud Mahjouri‐Samani

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202001260

Processing, Microstructure, and Performance of Robocast Clay-Based Ceramics Incorporating Hollow Alumina Microspheres

Yanfang Wu, Junjie Lan, Mingxuan Wu, Mingjun Wu, Li Tian, Hui Yang, Qijiang Li and Yue Li

Materials, 2024, 17, 1603
DOI: 10.3390/ma17071603

Investigating the effects of processing parameters in reactive extrusion additive manufacturing

Hongtao Song, Michael J. Fogg, Mehran Tehrani and Carolyn Seepersad

Additive Manufacturing, 2025, 101, 104716
DOI: 10.1016/j.addma.2025.104716

On the cogent formulation of an elastomeric silicone ink material for direct ink write (DIW) 3D printing

G. M. Fazley Elahee, Xiang Cheng, Lihan Rong, Ming‐Wei Xu, Lucio Souza, Rigoberto C. Advincula and Joao Maia

Polymer Engineering & Sci, 2024, 64, 2476
DOI: 10.1002/pen.26703

Multimaterial extrusion 3D printing printheads

Nathan C. Brown, Daniel C. Ames and Jochen Mueller

Nat Rev Mater, 2025
DOI: 10.1038/s41578-025-00809-y

Additive Manufacturing of Supercapacitor Electrodes – Materials, Methods and Design

Kiran Nargatti and Sandeep Ahankari

KEM, 2022, 913, 59
DOI: 10.4028/p-t38h57

Enhancement of Adhesion and Antibending Performance of Ag Circuit on Polyimide Fabricated by Heat‐Assisted Direct Ink Writing Method

Wenjie Wu, Xiaozhu Xie, Chao Shen, Jiangyou Long, Qinglei Ren and Wei Hu

Physica Status Solidi (a), 2022, 219
DOI: 10.1002/pssa.202200080

Advancements in additive manufacturing for electrochemical energy storage devices

Akash Jain, Tapish Raj, Ankit Sahai and Rahul Swarup Sharma

Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 2025
DOI: 10.1177/23977914251361025

Recent advances in 3D printable conductive hydrogel inks for neural engineering

Sung Dong Kim, Kyoungryong Kim and Mikyung Shin

Nano Convergence, 2023, 10
DOI: 10.1186/s40580-023-00389-z

Negative Thermal Expansion Metamaterials: A Review of Design, Fabrication, and Applications

Devashish Dubey, Anooshe Sadat Mirhakimi and Mohamed A. Elbestawi

JMMP, 2024, 8, 40
DOI: 10.3390/jmmp8010040

Coaxially 3D-printed ceramic scaffolds for thermal energy storage applications

L. Moreno-Sanabria, I. Díaz-Herrezuelo, M.I. Osendi, M. Belmonte and P. Miranzo

Journal of the European Ceramic Society, 2025, 45, 117531
DOI: 10.1016/j.jeurceramsoc.2025.117531

Review on 3D Fabrication at Nanoscale

Ke Wang, Qian Ma, Cai-Xin Qu, Hong-Tao Zhou, Miao Cao and Shu-Dong Wang

AUTEX Research Journal, 2023, 23, 350
DOI: 10.2478/aut-2022-0014

Revolutionising textile manufacturing: a comprehensive review on 3D and 4D printing technologies

João P. Manaia, Fábio Cerejo and João Duarte

Fash Text, 2023, 10
DOI: 10.1186/s40691-023-00339-7

Direct Ink Writing of Highly Conductive MXene Frames for Tunable Electromagnetic Interference Shielding and Electromagnetic Wave-Induced Thermochromism

Xinyu Wu, Tingxiang Tu, Yang Dai, Pingping Tang, Yu Zhang, Zhiming Deng, Lulu Li, Hao-Bin Zhang and Zhong-Zhen Yu

Nano-Micro Lett., 2021, 13
DOI: 10.1007/s40820-021-00665-9

Advances in Designing 3D‐Printed Systems for CO2 Reduction

Akshay Kumar K. Padinjareveetil and Martin Pumera

Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202201734

Perspectives of Additive Manufacturing in 5.0 Industry

Dariusz Sala and Maria Richert

Materials, 2025, 18, 429
DOI: 10.3390/ma18020429

Direct writing of customized structural-color graphics with colloidal photonic inks

Jong Bin Kim, Changju Chae, Sang Hoon Han, Su Yeon Lee and Shin-Hyun Kim

Sci. Adv., 2021, 7
DOI: 10.1126/sciadv.abj8780

Robocasting Additive Manufacturing of Titanium and Titanium Alloys: A Review

Carolina Oliver-Urrutia, Adelia Kashimbetova, Karel Slámečka, Ladislav Čelko and Edgar B. Montufar

Trans Indian Inst Met, 2023, 76, 389
DOI: 10.1007/s12666-022-02755-7

Additive manufacturing of high-performance carbon-composites: An integrated multi-axis pressure and temperature monitoring sensor

Hang-Gyeom Kim, Sugato Hajra, Dongik Oh, Namjung Kim and Hoe Joon Kim

Composites Part B: Engineering, 2021, 222, 109079
DOI: 10.1016/j.compositesb.2021.109079

Additive manufacturing of textured barium titanate ceramics via shear force‐induced platelet alignment

Alexis Lopez, Luis Rodriguez, Aaron Rodriguez, Sabina Arroyo, Alan Loera, Diana Fontes, Sofia Perez, Md Shahjahan Mahmud, Laura Molina, Saqlain Zaman, Cory Marquez, Joshua Dantzler, Anabel Renteria and Yirong Lin

Int J Ceramic Engine & Sci, 2025, 7
DOI: 10.1002/ces2.70003

Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing

Farzad Gholami, Liang Yue, Mingzhe Li, Ayush Jain, Akhlak Mahmood, Marcus Fratarcangeli, Rampi Ramprasad and H. Jerry Qi

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202408774

Developments and Challenges in Direct Ink Writing for High-Performance Polymers

Zhangzhang Tang, Yaoming Zhang, Liming Tao, Zenghui Yang, Peng Liu, Qihua Wang and Tingmei Wang

Additive Manufacturing Frontiers, 2025, 4, 200218
DOI: 10.1016/j.amf.2025.200218

Multi-Material Additive Manufacturing of High Temperature Polyetherimide (PEI)–Based Polymer Systems for Lightweight Aerospace Applications

Ved S. Vakharia, Hunter Leonard, Mrityunjay Singh and Michael C. Halbig

Polymers, 2023, 15, 561
DOI: 10.3390/polym15030561

Bioprinting of Perfusable Vascularized Organ Models for Drug Development via Sacrificial‐Free Direct Ink Writing

Dongwei Wu, Shumin Pang, Johanna Berg, Yikun Mei, Ahmed S. M. Ali, Viola Röhrs, Beatrice Tolksdorf, Judith Hagenbuchner, Michael J. Ausserlechner, Hedwig E. Deubzer, Aleksander Gurlo and Jens Kurreck

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202314171

Viscoelastic properties of thermosensitive gelatin/tragacanth hydrogel as novel ink suitable for additive manufacturing: Effect of various additives on system's viscoelastic characteristics and printability

H. Zehtab Minooei and B. Kaffashi

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.54328

Multi-material 4D printing employing stimuli-responsive polymer composites using vat photopolymerization

Fahad Alam and Nazek El-Atab

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2024.2444576

Additive Manufacturing of Conducting Polymers: Recent Advances, Challenges, and Opportunities

Miryam Criado-Gonzalez, Antonio Dominguez-Alfaro, Naroa Lopez-Larrea, Nuria Alegret and David Mecerreyes

ACS Appl. Polym. Mater., 2021, 3, 2865
DOI: 10.1021/acsapm.1c00252

Soft Shear and Compressive Contact Stresses Sensor With Conductive Microfluidic Channels Fabricated by Additive Manufacturing

Ketut B. Putra, Xiaoqing Tian and Albert J. Shih

IEEE Sensors J., 2022, 22, 7674
DOI: 10.1109/JSEN.2022.3159452

Arbitrary-shape-adaptable strain sensor array with optimized circuit layout via direct-ink-writing: Scalable design and hierarchical printing

Peishi Yu, Lixin Qi, Zhiyang Guo, Shiyu Lin, Yu Liu and Junhua Zhao

Materials & Design, 2022, 214, 110388
DOI: 10.1016/j.matdes.2022.110388

Constructing Flexible All‐Solid‐State Supercapacitors from 3D Nanosheets Active Bricks via 3D Manufacturing Technology: A Perspective Review

Bolin Li, Mei Yu, Zesheng Li, Changlin Yu, Hongqiang Wang and Qingyu Li

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202201166

Lignin‐Based Materials for Additive Manufacturing: Chemistry, Processing, Structures, Properties, and Applications

Bo Jiang, Huan Jiao, Xinyu Guo, Gegu Chen, Jiaqi Guo, Wenjuan Wu, Yongcan Jin, Guozhong Cao and Zhiqiang Liang

Advanced Science, 2023, 10
DOI: 10.1002/advs.202206055

Recent advances in 3D printed electrode materials for electrochemical energy storage devices

Suhail Mubarak, Duraisami Dhamodharan and Hun-Soo Byun

Journal of Energy Chemistry, 2023, 81, 272
DOI: 10.1016/j.jechem.2023.01.037

Refractive Index Engineering of 3D‐Printing Terahertz Composite Materials

Seyed Mostafa Latifi, Pouya Torkaman, Esther García‐Tuñón and Shang‐Hua Yang

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500344

Development of TiO2/ZrO2 Multi-Material Obtained from Ceramic Pastes for Material Extrusion

Arseniy Repnin, Anton Sotov, Anatoliy Popovich and Dmitriy Masaylo

Micromachines, 2023, 14, 2177
DOI: 10.3390/mi14122177

Digital light processing 3D printing of multi-materials with improved adhesion using resins containing low functional acrylates

Hyeonwoo Hwangbo and Seog-Jin Jeon

Korean J. Chem. Eng., 2022, 39, 451
DOI: 10.1007/s11814-021-0934-x

Recent Advances in Tactile Sensory Systems: Mechanisms, Fabrication, and Applications

Jianguo Xi, Huaiwen Yang, Xinyu Li, Ruilai Wei, Taiping Zhang, Lin Dong, Zhenjun Yang, Zuqing Yuan, Junlu Sun and Qilin Hua

Nanomaterials, 2024, 14, 465
DOI: 10.3390/nano14050465

Newtonian liquid-assisted material extrusion 3D printing: Progress, challenges and future perspectives

Rahul Karyappa, Danwei Zhang, Qiang Zhu, Rong Ji, Ady Suwardi and Hongfei Liu

Additive Manufacturing, 2024, 79, 103903
DOI: 10.1016/j.addma.2023.103903

Influence of Microwave-Treated Waste Aramid Fibers on the Mechanical Behavior of 3D-Printed Composite Materials

Jigar Patadiya, Balasubramanian Kandasubramanian, Minoo Naebe, Ramdayal Yadav, Vansala Ganesan and Tharika Joseph

Journal of Micro and Nano Science and Engineering, 2025, 13
DOI: 10.1115/1.4068281

A Simple Route of Printing Explosive Crystalized Micro-Patterns by Using Direct Ink Writing

Albertus Brilian, Veasna Soum, Sooyong Park, Soojin Lee, Jungwook Kim, Kuktae Kwon, Oh-Sun Kwon and Kwanwoo Shin

Micromachines, 2021, 12, 105
DOI: 10.3390/mi12020105

Direct Ink Writing Additive Manufacturing of Silica Aerogels

Bo Chen, Qiyang Jiang, Jing Tu, Xinhong Xiong and Jiaxi Cui

ChemSusChem, 2025, 18
DOI: 10.1002/cssc.202402119

A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

Usman Shaukat, Elisabeth Rossegger and Sandra Schlögl

Polymers, 2022, 14, 2449
DOI: 10.3390/polym14122449

Progress and opportunities in additive manufacturing of electrically conductive polymer composites

Yinjia Yan, Yixue Jiang, Evelyn Ling Ling Ng, Yanni Zhang, Cally Owh, Fuke Wang, Qing Song, Tao Feng, Biao Zhang, Peng Li, Xian Jun Loh, Siew Yin Chan and Benjamin Qi Yu Chan

Materials Today Advances, 2023, 17, 100333
DOI: 10.1016/j.mtadv.2022.100333

Biopolymer Composites Material Extrusion and their Applications: A Review

Dan Li, Yunxia Yang, Anastasia L. Elias, Ning Yan and Fu Guo

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202301048

Additive Manufacturing of Electrochemical Energy Storage Systems Electrodes

Davi Marcelo Soares, Zhongkan Ren, Shakir Bin Mujib, Santanu Mukherjee, Carla Giselle Martins Real, Mabel Anstine, Hudson Zanin and Gurpreet Singh

Adv Energy and Sustain Res, 2021, 2
DOI: 10.1002/aesr.202000111

Construction of Bionic Porous Polyetherimide Structure by an In Situ Foaming Fused Deposition Modeling Process

Mengnan Zhou, Mengya Li, Junjie Jiang, Ning Gao, Fangwei Tian and Wentao Zhai

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202101027

From whey robocasting to custom 3D porous carbons

Raúl Llamas-Unzueta, J. Angel Menéndez, Marta Suárez, Adolfo Fernández and Miguel A. Montes-Morán

Additive Manufacturing, 2022, 59, 103083
DOI: 10.1016/j.addma.2022.103083

Features and limitations of recent elastoviscoplastic constitutive models under Large Amplitude Oscillatory Shear (LAOS)

Rishav Agrawal, Esther García-Tuñón, Robert J. Poole and Cláudio P. Fonte

Journal of Non-Newtonian Fluid Mechanics, 2025, 338, 105407
DOI: 10.1016/j.jnnfm.2025.105407

3D-printable biopolymer-based materials for water treatment: A review

Natalia Fijoł, Andrea Aguilar-Sánchez and Aji P. Mathew

Chemical Engineering Journal, 2022, 430, 132964
DOI: 10.1016/j.cej.2021.132964

Electrostatically-assisted direct ink writing with superior speed and resolution

J. Plog, X. Wang, Y. Pan and A.L. Yarin

Journal of Manufacturing Processes, 2022, 76, 752
DOI: 10.1016/j.jmapro.2022.02.038

Sol-gel technologies for additive manufacturing glass materials

Monisha Murthi and Joel F. Destino

J Sol-Gel Sci Technol, 2025
DOI: 10.1007/s10971-025-06664-1

Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

Seymur Hasanov, Suhas Alkunte, Mithila Rajeshirke, Ankit Gupta, Orkhan Huseynov, Ismail Fidan, Frank Alifui-Segbaya and Allan Rennie

JMMP, 2021, 6, 4
DOI: 10.3390/jmmp6010004

Advanced Additive Manufacturing of Structurally‐Colored Architectures

Jong Bin Kim, Hwan‐Young Lee, Changju Chae, Su Yeon Lee and Shin‐Hyun Kim

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202307917

Physically Entangled Antiswelling Hydrogels with High Stiffness

Suchun Ji, Xiying Li, Shuang Wang, Hongyuan Li, Huiling Duan, Xin Yang and Pengyu Lv

Macromol. Rapid Commun., 2022, 43
DOI: 10.1002/marc.202200272

A microfluidic printhead with integrated hybrid mixing by sequential injection for multimaterial 3D printing

Islam Hassan and Ponnambalam Ravi Selvaganapathy

Additive Manufacturing, 2022, 50, 102559
DOI: 10.1016/j.addma.2021.102559

3D hierarchical porous structures printed from a silica-nickel composite paste

Ewelina Mackiewicz, Tomasz Wejrzanowski, Remigiusz Nowacki, Jakub Jaroszewicz, Jakub Marchewka, Łukasz Wilk, Patryk Bezkosty and Maciej Sitarz

Applied Materials Today, 2023, 33, 101859
DOI: 10.1016/j.apmt.2023.101859

Boosting the Lithium Storage Properties of a Flexible Li4Ti5O12/Graphene Fiber Anode via a 3D Printing Assembly Strategy

Chenpeng Zhao, Rui Wang, Biao Fang, Han Liang, Biyuan Nie, Ruyi Wang, Biao Xu, Songyang Feng, Ruqing Li, Shuaifei Li, Yuhui Xiong, Yuye Shao and Runwei Mo

Batteries, 2023, 9, 493
DOI: 10.3390/batteries9100493

Impact of online mixing via KSM on the accuracy of ingredient deposition in manufacturing FGMs

Weiwei Guo, Zhaoliang Jiang, Honghao Zhong, Ruiyuan Hou and Jing Xu

International Journal of Mechanical Sciences, 2023, 241, 107971
DOI: 10.1016/j.ijmecsci.2022.107971

Triplet Fusion Upconversion for Photocuring 3D‐Printed Particle‐Reinforced Composite Networks

Jitkanya Wong, Shixuan Wei, Rinat Meir, Naroa Sadaba, Nathan A. Ballinger, Elizabeth K. Harmon, Xin Gao, Gokce Altin‐Yavuzarslan, Lilo D. Pozzo, Luis M. Campos and Alshakim Nelson

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202207673

Ultraflexible Sensor Development via 4D Printing: Enhanced Sensitivity to Strain, Temperature, and Magnetic Fields

Yanbei Hou, Hancen Zhang and Kun Zhou

Advanced Science, 2025, 12
DOI: 10.1002/advs.202411584

3D Printing of Next‐generation Electrochemical Energy Storage Devices: from Multiscale to Multimaterial

Xi Xu, Yong Hao Tan, Jun Ding and Cao Guan

Energy & Environ Materials, 2022, 5, 427
DOI: 10.1002/eem2.12175

Additive manufacturing of polymeric composites from material processing to structural design

Shangqin Yuan, Shaoying Li, Jihong Zhu and Yunlong Tang

Composites Part B: Engineering, 2021, 219, 108903
DOI: 10.1016/j.compositesb.2021.108903

Additive manufacturing solidification methodologies for ink formulation

Xi Xu, Jiayu Yang, Win Jonhson, Yuxuan Wang, Ady Suwardi, Jun Ding, Cao Guan and Danwei Zhang

Additive Manufacturing, 2022, 56, 102939
DOI: 10.1016/j.addma.2022.102939

Direct Ink Writing of Conductive Hydrogels

Monica Ho, Aline Braz Ramirez, Negar Akbarnia, Eric Croiset, Elisabeth Prince, Gerald G. Fuller and Milad Kamkar

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202415507

Advances in 3D and 4D Printing of Soft Robotics and Their Applications

Hao Liu, Changchun Wu, Senyuan Lin, James Lam, Ning Xi and Yonghua Chen

Advanced Intelligent Systems, 2025, 7
DOI: 10.1002/aisy.202400699

Additive manufacturing of nanocellulose based scaffolds for tissue engineering: Beyond a reinforcement filler

Tobias Kuhnt and Sandra Camarero-Espinosa

Carbohydrate Polymers, 2021, 252, 117159
DOI: 10.1016/j.carbpol.2020.117159

3D‐Printed Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations

Bin Ling, Rishav Agrawal, Donglin He, Robert J. Poole, Andrew I. Cooper, Ming Liu and Esther García‐Tuñón

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202405320

Minimizing defects in extrusion-based additive manufacturing through controlled filament spreading and overlapping

Heedong Yoon, Amir Azimi Yancheshme, Rhys Butler, Giuseppe R. Palmese and Nicolas J. Alvarez

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2025, 720, 136879
DOI: 10.1016/j.colsurfa.2025.136879

Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing

Andrew House, Anna Kuna, Daniel Hastings, Nikki Rodriguez, Mirko Schoenitz, Edward L. Dreizin and Murat Guvendiren

Prog Addit Manuf, 2023, 8, 1573
DOI: 10.1007/s40964-023-00422-x

Direct ink writing with dental composites: A paradigm shift toward sustainable chair-side production

Po-Chun Tseng, Dar-Bin Shieh, Andreas Kessler, Dalia Kaisarly, Peter Rösch and Karl-Heinz Kunzelmann

Dental Materials, 2024, 40, 1753
DOI: 10.1016/j.dental.2024.08.002

Additive technology for forming multi-material samples of “stainless steel – high-entropy alloys” system

D. V. Masaylo, A. V. Repnin, A. A. Popovich, N. G. Razumov and A. K. Mazeeva

Izv. VUZ. Poroshk. Met., 2024, 18, 62
DOI: 10.17073/1997-308X-2024-1-62-72

3D Printability Assessment of Poly(octamethylene maleate (anhydride) citrate) and Poly(ethylene glycol) Diacrylate Copolymers for Biomedical Applications

Dominic J. Wales, Meysam Keshavarz, Carmel Howe and Eric Yeatman

ACS Appl. Polym. Mater., 2022, 4, 5457
DOI: 10.1021/acsapm.2c00531

Engineered Shape‐Morphing Transitions in Hydrogels Through Suspension Bath Printing of Temperature‐Responsive Granular Hydrogel Inks

Keisuke Nakamura, Nikolas Di Caprio and Jason A. Burdick

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202410661

Orientation of macro/microscopic structures in anisotropic materials through 3D printing: Rheological behavior, processing, and properties

Xinyu Guo, Huan Jiao, Xuyang Guo, Chengyang Du, Dongsheng Shi, Wenjuan Wu, Yongcan Jin and Bo Jiang

Composites Part A: Applied Science and Manufacturing, 2025, 192, 108767
DOI: 10.1016/j.compositesa.2025.108767

3D printing of carbon-based materials: A review

P. Blyweert, V. Nicolas, V. Fierro and A. Celzard

Carbon, 2021, 183, 449
DOI: 10.1016/j.carbon.2021.07.036

3D printing and artificial intelligence tools for droplet microfluidics: Advances in the generation and analysis of emulsions

Sibilla Orsini, Marco Lauricella, Andrea Montessori, Adriano Tiribocchi, Mihir Durve, Sauro Succi, Luana Persano, Andrea Camposeo and Dario Pisignano

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0228610

Participation of Polymer Materials in the Structure of Piezoelectric Composites

Cosmin Ionuț Pîrvu, Alexandru Sover and Mărioara Abrudeanu

Polymers, 2024, 16, 3603
DOI: 10.3390/polym16243603

Improved 3D-Printability of Cellulose Acetate to Mimic Water Absorption in Plant Roots through Nanoporous Networks

Gaoshuang Liu, Mahesh P. Bhat, Cheol Soo Kim, Jangho Kim and Kyeong-Hwan Lee

Macromolecules, 2022, 55, 1855
DOI: 10.1021/acs.macromol.2c00052

Insights into architecture, design and manufacture of electrodes for lithium-ion batteries

Pengcheng Zhu, Peter R. Slater and Emma Kendrick

Materials & Design, 2022, 223, 111208
DOI: 10.1016/j.matdes.2022.111208

Materializing Autonomy in Soft Robots across Scales

Thomas A. Berrueta, Todd D. Murphey and Ryan L. Truby

Advanced Intelligent Systems, 2024, 6
DOI: 10.1002/aisy.202300111

3D-printing of ceramic filaments with ductile metallic cores

Qiaosong Cai, Sylvain Meille, Jérôme Chevalier, Shitong Zhou, Florian Bouville, Iuliia Tirichenko and Eduardo Saiz

Materials & Design, 2023, 225, 111463
DOI: 10.1016/j.matdes.2022.111463

Additive Manufacturing of Shape Memory Thermoset Composites with Directional Thermal Conductivity

Yinglun Hong, Itxaso Azcune, Alaitz Rekondo, Tianhui Jiang, Shitong Zhou, Tristan Lowe and Eduardo Saiz

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202311193

A Review on Materials and Technologies for Organic Large‐Area Electronics

Cláudia S. Buga and Júlio C. Viana

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202001016

Additive manufacturing of silicone-thermoplastic elastomeric composite architectures

Wenbo Liu, Ronald R Campbell, Mookkan Periyasamy and Michael A Hickner

Journal of Composite Materials, 2022, 56, 4409
DOI: 10.1177/00219983221131614

On the selection of rheological tests for the prediction of 3D printability

Ying Liu, Matthew Hildner, Omkar Roy, William A. Van den Bogert, James Lorenz, Maude Desroches, Kurt Koppi, Albert Shih and Ronald G. Larson

Journal of Rheology, 2023, 67, 791
DOI: 10.1122/8.0000612

Direct ink writing of 2D material-based supercapacitors

Xiaocong Tian

2D Mater., 2022, 9, 012001
DOI: 10.1088/2053-1583/ac3f43

Bioinspired strategy to break strength-plasticity trade-off in high-entropy alloy

Weiqi Wang, Lidan Qu and Yunzhuo Lu

Materials Research Letters, 2024, 12, 806
DOI: 10.1080/21663831.2024.2387747

Subvoxel‐Controlled Microfluidic Printing of Dual‐Material and Multi‐Structural Filaments

Zihan Bai, Liwen Zhang, Xinzhao Zhou, Song Zhao, Changjun Yang, Yu Zhou, Kuntao Tan, Zehui Zhao and Huawei Chen

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202301150

Electromechanical analysis of electrospun polymer fiber deposition

Ka Chun Chan, Ahsana Sadaf, Jan Gerrit Korvink and Wolfgang Wenzel

Journal of Applied Physics, 2023, 134
DOI: 10.1063/5.0171903

Recent advances in additive manufacturing for solar cell based on organic/inorganic hybrid materials

Ziyue Ju, Ruichan Lv, Anees A. Ansari and Jun Lin

InfoMat, 2025, 7
DOI: 10.1002/inf2.70017

3D-printed multilayer membranes for photocatalytic degradation of ciprofloxacin

Dinis․ C․ Alves, P․M․ Martins, Rafael Pinto, Pedro Costa, B․ Bazán, Roberto Fernández de Luis, D․M․ Correia and S․ Lanceros-Méndez

Applied Materials Today, 2025, 44, 102728
DOI: 10.1016/j.apmt.2025.102728

Printing resolution effect on mechanical properties of porous boehmite direct ink 3D printed structures

Rushikesh S. Ambekar, Antony Joseph, Santosh Ganji, Ravi Agrawal, Ghata Nirmal and Chandra Sekhar Tiwary

Ceramics International, 2024, 50, 44447
DOI: 10.1016/j.ceramint.2024.08.292

Direct Ink Writing of Carbon‐Based Electrofluids for Soft Electrical Component Manufacturing

Niclas Hautz and Lola González‐García

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202402012

Go with the flow: Rheological requirements for direct ink write printability

Peiran Wei, Ciera Cipriani, Chia-Min Hsieh, Krutarth Kamani, Simon Rogers and Emily Pentzer

Journal of Applied Physics, 2023, 134
DOI: 10.1063/5.0155896

Vitrimers for 3D Printing Technology: Current Status and Future Perspectives

Ankit Sharma, Avtar Chand, Inderdeep Singh and Bharti Gaur

Ind. Eng. Chem. Res., 2025, 64, 2491
DOI: 10.1021/acs.iecr.4c03705

Direct Assembly of Multilayered Core–Shell Structured Composites for Self‐Sensing and Soft Robotic Fingers

Jun Ren, Yan‐Bing Cao, Heng‐Yong Nie, Yang Zhang and Yu Liu

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401992

Translucent zirconia dental prosthesis processed by Direct Ink Writing: Updates and challenges

Claudinei dos Santos, Joana Baltazar, Manuel F.R.P. Alves and Susana M. Olhero

Journal of Manufacturing Processes, 2024, 131, 1656
DOI: 10.1016/j.jmapro.2024.09.105

Single‐Piece Membrane Supercapacitor with Exceptional Areal/Volumetric Capacitance via Double‐Face Print of Electrode/Electrolyte Active Ink

Zhenyun Zhao, Dongliang Chen, Ming Lu, Jingwen Lin, Yang Hou, Qinghua Zhang, Zhongjian Li, Lei Jiao, Zhizhen Ye and Jianguo Lu

Small Methods, 2023, 7
DOI: 10.1002/smtd.202300178

3D printing by direct ink writing (DIW) of UV-curable elastomers with embedded sensors for soft robotic and flexible electronic applications

Emrah Demirkal, Derrick Banerjee, Rowan Barto, Katarzyna Sabolsky, Konstantinos A Sierros and Edward M Sabolsky

Flex. Print. Electron., 2025, 10, 035001
DOI: 10.1088/2058-8585/ade5b8

Direct Ink Writing of 3D‐Structured All‐Carbon Electrodes with High Electrical Conductivity for (Vanadium) Redox Flow Batteries

Pablo Rodríguez Lagar, Alejandro Concheso, Daniel Barreda, Zoraida González, Miguel A. Montes‐Morán, J. Angel Menéndez, Clara Blanco, Ricardo Santamaría and Victoria G. Rocha

Advanced Science, 2025, 12
DOI: 10.1002/advs.202417641

Additive Manufacturing: A Paradigm Shift in Revolutionizing Catalysis with 3D Printed Photocatalysts and Electrocatalysts Toward Environmental Sustainability

Valerine Khoo, Sue‐Faye Ng, Choon‐Yian Haw and Wee‐Jun Ong

Small, 2024, 20
DOI: 10.1002/smll.202401278

Frontiers in 3D printing for biobased food packaging

Dhruv Thakur, Mohammed A. Bareen, Achala Gupta, Sampa Saha and Jatindra K. Sahu

Food Sci Biotechnol, 2025, 34, 2381
DOI: 10.1007/s10068-024-01770-2

Nanomaterials in 4D Printing: Expanding the Frontiers of Advanced Manufacturing

Shengbo Guo, Haitao Cui, Tarun Agarwal and Lijie Grace Zhang

Small, 2024, 20
DOI: 10.1002/smll.202307750

Comprehensive review of 3D/4D printing of soft materials, methods and applications

Muhammad Raies Abdullah, Zhen Peng, Vignesh babu Rajendren, Farooq Ahmad, Syed Sohail Ahmed Shah, Abdul Wasy Zia, Amjad Ali, Guanjun Qiao and Khurram Shehzad

Applied Materials Today, 2025, 43, 102667
DOI: 10.1016/j.apmt.2025.102667

Narrative review of 3D-printed temporary and permanent dental resin restorations

Andreas Keßler, Lukas Montenbruck, Falk Schwendicke, Jörg Lüchtenborg and Dalia Kaisarly

Polymer Testing, 2025, 151, 108953
DOI: 10.1016/j.polymertesting.2025.108953

Laser processing of Crofer22APU and 3YSZ: an interlocking approach for improved interfaces with glass-based seals in solid oxide electrolysers

F. D'Isanto, S. Anelli, F. Puleo, M. Salvo, D.M.N. Menon, S. Márquez, D. Janner, E. Zanchi, A.G. Sabato, A. Tarancón and F. Smeacetto

Ceramics International, 2025
DOI: 10.1016/j.ceramint.2025.07.326

Direct ink writing of customized polymeric structures embedded in a nano-silicate based supporting matrix

Shubham Shankar Mohol and Pulak Mohan Pandey

Polymer, 2024, 312, 127635
DOI: 10.1016/j.polymer.2024.127635

3D Printing for Solid‐State Energy Storage

Xiaocong Tian and Bingang Xu

Small Methods, 2021, 5
DOI: 10.1002/smtd.202100877

Review: Progress on 3D printing technology in the preparation of flexible tactile sensors

Ke Xu and Yuhe Tang

J Mater Sci, 2023, 58, 16869
DOI: 10.1007/s10853-023-09091-1

Effective Young’s modulus of highly porous 3D printed mono-material and coaxial structures

L. Moreno-Sanabria, T. Uhlířová, W. Pabst, M. Koller, H. Seiner, M.I. Osendi, M. Belmonte and P. Miranzo

Journal of the European Ceramic Society, 2024, 44, 116771
DOI: 10.1016/j.jeurceramsoc.2024.116771

Designing Strong yet Tough, Multifunctional and Printable Dynamic Cross‐Linking Waterborne Polyurethane for Customizable Smart Soft Devices

Xingyuan Lu, Hongqiu Wei, Ping Zhang, An Wei, Siying Zhao, Qian Wang, Jupen Liu and You Yu

Adv Funct Materials, 2025
DOI: 10.1002/adfm.202502720

Printed Interconnects for Heterogeneous Systems Integration on Flexible Substrates

Abhishek Singh Dahiya, Adamos Christou, Sihang Ma and Ravinder Dahiya

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401213

Effective, versatile and inexpensive extruder system for direct ink writing of high-viscosity pastes

Pablo Rodríguez-Lagar, Alejandro Reguera-García, Raúl Llamas-Unzueta, Clara Blanco, Ricardo Santamaría, Miguel A. Montes-Morán, J. Angel Menéndez and Victoria G. Rocha

Int J Adv Manuf Technol, 2024, 131, 4739
DOI: 10.1007/s00170-024-13250-2

Considerations of aerosol-jet printing for the fabrication of printed hybrid electronic circuits

D.R. Hines, Y. Gu, A.A. Martin, P. Li, J. Fleischer, A. Clough-Paez, G. Stackhouse, A. Dasgupta and S. Das

Additive Manufacturing, 2021, 47, 102325
DOI: 10.1016/j.addma.2021.102325

The Role of 3D Printing Technologies in Soft Grippers

Yangyang Xin, Xinran Zhou, Hyunwoo Bark and Pooi See Lee

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202307963

High-performance thermosets for additive manufacturing

Thamires Andrade Lima, Anh Fridman, Jaclyn McLaughlin, Clayton Francis, Anthony Clay, Ganesh Narayanan, Heedong Yoon, Mohanad Idrees, Giuseppe R. Palmese, John La Scala and Nicolas Javier Alvarez

Innov. Emerg. Technol., 2023, 10
DOI: 10.1142/S2737599423300039

A green inorganic binder for material extrusion of ultra-low shrinkage and relatively high strength metakaolin ceramics at low sintering temperature

Fuchu Liu, Ming Wu, Yuxiao Lin, Miao Wang, Yi Wang, Yaowu Zheng, Qinglei Sun, Wentao Xu, Hao Liu and Guangchao Han

Ceramics International, 2024, 50, 50454
DOI: 10.1016/j.ceramint.2024.09.391

4D Printing: A Comprehensive Review of Technologies, Materials, Stimuli, Design, and Emerging Applications

Aixiang Ding, Fang Tang and Eben Alsberg

Chem. Rev., 2025, 125, 3663
DOI: 10.1021/acs.chemrev.4c00070

3D Printing of Transparent Silicone Elastomers

Michael J. Ford, Colin K. Loeb, Lemuel X. Pérez Pérez, Stuart Gammon, Steven Guzorek, Hawi B. Gemeda, Alexandra M. Golobic, August Honnell, Justin Erspamer, Eric B. Duoss, Thomas S. Wilson and Jeremy M. Lenhardt

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202100974

A comprehensive review of ceramic additive manufacturing: Advancements in Direct Ink Writing (DIW) and tribological properties of 3D-printed ceramics

M. Alebrahim, M.J. Ghazali, N.H. Jamadon and Y. Otsuka

Tribology International, 2025, 207, 110606
DOI: 10.1016/j.triboint.2025.110606

Time Code for multifunctional 3D printhead controls

Sarah Propst and Jochen Mueller

Nat Commun, 2025, 16
DOI: 10.1038/s41467-025-56140-1

Emerging application of 3D-printing techniques in lithium batteries: From liquid to solid

Xuejie Gao, Matthew Zheng, Xiaofei Yang, Runcang Sun, Jiujun Zhang and Xueliang Sun

Materials Today, 2022, 59, 161
DOI: 10.1016/j.mattod.2022.07.016

Let’s Print an Ecology in 3D (and 4D)

Magdalena Szechyńska-Hebda, Marek Hebda, Neslihan Doğan-Sağlamtimur and Wei-Ting Lin

Materials, 2024, 17, 2194
DOI: 10.3390/ma17102194

Direct Ink Writing of AISI 316L Dense Parts and Porous Lattices

Lisa Biasetto and Hamada Elsayed

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202101729

Additive manufacturing of Ni-free Ti-based shape memory alloys: A review

Tània Vilella, Daniel Rodríguez and Gemma Fargas

Biomaterials Advances, 2024, 158, 213774
DOI: 10.1016/j.bioadv.2024.213774

Breakthrough to the pragmatic evolution of direct ink writing: progression, challenges, and future

Komal Sandeep Pandya, Sarang Subhashchandra Shindalkar and Balasubramanian Kandasubramanian

Prog Addit Manuf, 2023, 8, 1303
DOI: 10.1007/s40964-023-00399-7

Direct ink writing of lightweight 3D structures from alkali-activated waste fiberglass and glass microsphere fillers

Abel W. Ourgessa, Ahmed Gamal Abd-Elsatar, Mokhtar Mahmoud, Hamada Elsayed, Jozef Kraxner, Dusan Galusek and Enrico Bernardo

Open Ceramics, 2025, 23, 100825
DOI: 10.1016/j.oceram.2025.100825

A framework for the sustainability implications of 3D bioprinting through nature-inspired materials and structures

Ruban Whenish, Seeram Ramakrishna, Amit Kumar Jaiswal and Geetha Manivasagam

Bio-des. Manuf., 2022, 5, 412
DOI: 10.1007/s42242-021-00168-x

Factors Influencing the Orientation of Carbon Nanotubes in Flexible and Lightweight Composite Ribbons during Direct Ink Writing

Naw Blessing Oo, Nikita Kumari, Maireyee Bhattacharya, Ryo Abe, Naofumi Okamoto, Manish Pandey, Hiroaki Benten and Masakazu Nakamura

ACS Omega, 2025, 10, 25981
DOI: 10.1021/acsomega.5c02270

Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing

Nadim S. Hmeidat, Daniel S. Elkins, Hutchison R. Peter, Vipin Kumar and Brett G. Compton

Composites Part B: Engineering, 2021, 223, 109122
DOI: 10.1016/j.compositesb.2021.109122

Printability criterion and filler characteristics model for material extrusion additive manufacturing

James J. Griebler, Alexander S. Tappan, Simon A. Rogers, Anne M Grillet and Jessica W. Kopatz

Additive Manufacturing, 2025, 99, 104651
DOI: 10.1016/j.addma.2025.104651

Getting in line: Filler alignment strategies for anisotropic composite fabrication

Dong Hae Ho, Yoon Young Choi, Seung Yeon Ki, Dong-Hwan Kim and Jeong Ho Cho

Composites Part B: Engineering, 2025, 305, 112626
DOI: 10.1016/j.compositesb.2025.112626

Tailorable 3DP Flexible Scaffolds with Porosification of Filaments Facilitate Cell Ingrowth and Biomineralized Deposition

Peiyang Gu, Yang Xu, Quanying Liu, Yuxiang Wang, Zhulian Li, Manyu Chen, Ruiqi Mao, Jie Liang, Xingdong Zhang, Yujiang Fan and Yong Sun

ACS Appl. Mater. Interfaces, 2022, 14, 32914
DOI: 10.1021/acsami.2c07649

Ink Tuning for Direct Ink Writing of Planar Metallic Lattices

Lisa Biasetto, Andy Gleadall and Vanessa Gastaldi

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202201858

The role of printed electronics and related technologies in the development of smart connected products

C S Buga and J C Viana

Flex. Print. Electron., 2022, 7, 043001
DOI: 10.1088/2058-8585/ac91de

Compendious review on 3D-printed gels for effluent treatment

Apsara Panchapakesan, Priyanka Anil Dalave, Balasubramanian Kandasubramanian and Sikiru O. Ismail

Hybrid Advances, 2024, 6, 100272
DOI: 10.1016/j.hybadv.2024.100272

Direct Writing of Silver Nanowire Patterns with Line Width down to 50 μm and Ultrahigh Conductivity

Xiangyi Kong, Hejian Li, Jianping Wang, Yangyang Wang, Liang Zhang, Min Gong, Xiang Lin and Dongrui Wang

ACS Appl. Mater. Interfaces, 2023, 15, 9906
DOI: 10.1021/acsami.2c22885

Rheological modeling of frontal-polymerization-based direct ink writing of thermoset polymers

Michael Zakoworotny, Francisco Javier Balta Bonner, Aditya Kumar, Jia En Aw, Sameh H. Tawfick, Randy H. Ewoldt, Nancy R. Sottos and Philippe H. Geubelle

Computer Methods in Applied Mechanics and Engineering, 2024, 418, 116565
DOI: 10.1016/j.cma.2023.116565

3D Printed Electromyography Sensing Systems

Haotian Su, Hadi Moeinnia and Woo Soo Kim

Advanced Sensor Research, 2023, 2
DOI: 10.1002/adsr.202300003

Novel materials for electrochemical sensing platforms

Achi Fethi

Sensors International, 2020, 1, 100035
DOI: 10.1016/j.sintl.2020.100035

Wireless pressure monitoring system utilizing a 3D-printed Origami pressure sensor array

Hadi Moeinnia, Danielle Jaye Agron, Carl Ganzert, Loren Schubert and Woo Soo Kim

npj Flex Electron, 2024, 8
DOI: 10.1038/s41528-024-00309-z

Cost-effective 3D printing of whey-hydroxyapatite composites for the fabrication of biocarbon-ceramic bone scaffolds with hierarchical porosity

Raúl Llamas-Unzueta, Alejandro Reguera-García, Marta Suárez, Adolfo Fernández, Raquel Díaz, Miguel A. Montes-Morán and J. Angel Menéndez

Ceramics International, 2025
DOI: 10.1016/j.ceramint.2025.08.408

Advanced manufacturing of inorganic glasses

Moushira A. Mohamed, Mohamed A. Ali, Xiaofeng Liu and Jianrong Qiu

Optical Materials, 2025, 167, 117269
DOI: 10.1016/j.optmat.2025.117269

Metallic Multimaterials Fabricated by Combining Additive Manufacturing and Powder Metallurgy

Mayank Kumar Yadav, Riddhi Shukla, Lixia Xi, Zhi Wang and Konda Gokuldoss Prashanth

J. Compos. Sci., 2025, 9, 80
DOI: 10.3390/jcs9020080

Understanding ink design and printing dynamics of extrusion-based 3D printing: Defect-free dense piezoelectric ceramics

Sk S. Hossain, Seongwan Jang, Sujin Park and Chang-Jun Bae

Journal of Manufacturing Processes, 2023, 92, 1
DOI: 10.1016/j.jmapro.2023.02.018

Multi‐Material Additively Manufactured Magnetoelectric Architectures with a Structure‐Dependent Mechanical‐to‐Electrical Conversion Capability

Hongzhi Wu, Qi Wang, Zhenhua Wu, Mingzhe Wang, Lei Yang, Zhufeng Liu, Siqi Wu, Bin Su, Chunze Yan and Yusheng Shi

Small Methods, 2022, 6
DOI: 10.1002/smtd.202201127

Micro/nano functional devices fabricated by additive manufacturing

Zhiyuan Huang, Guangbin Shao and Longqiu Li

Progress in Materials Science, 2023, 131, 101020
DOI: 10.1016/j.pmatsci.2022.101020

3D-printed cellulose nanocrystals and gelatin scaffolds with bioactive cues for regenerative medicine: Advancing biomedical applications

Prerna Singh, Hossein Baniasadi, Sneha Gupta, Rupita Ghosh, Shazia Shaikh, Jukka Seppälä and Ashok Kumar

International Journal of Biological Macromolecules, 2024, 278, 134402
DOI: 10.1016/j.ijbiomac.2024.134402

Additive manufacturing of thermoset elastomers: A review of emerging technologies

Csenge Tóth, Ábris Dávid Virág, István Halász-Kutasi, Norbert Krisztián Kovács and Tamás Bárány

Engineering Science and Technology, an International Journal, 2025, 69, 102143
DOI: 10.1016/j.jestch.2025.102143

Microstructure and energetic characteristics of direct ink printed polymer-free rGO/nanothermite aerogel

Anqi Wang, Connor J. MacRobbie, Alex Baranovsky, Jean-Pierre Hickey and John Z. Wen

Carbon, 2024, 216, 118596
DOI: 10.1016/j.carbon.2023.118596

Thermal conductivity of three-dimensional multi-material core-shell filament structures obtained by material extrusion

L. Moreno-Sanabria, C. Ramírez, M.I. Osendi, M. Belmonte and P. Miranzo

Additive Manufacturing, 2024, 81, 104018
DOI: 10.1016/j.addma.2024.104018

3D Printing of chewable oral tablets using drug nanosuspension inks: an experimental and machine learning study

Hang Truong, Nikki Rodriguez, Alperen Abaci, Gulenay Guner, Joshua Young, Ecevit A. Bilgili and Murat Guvendiren

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2025.2517811

Electrowetting-assisted direct ink writing for low-viscosity liquids

Yizhou Jiang, Xinnian Wang, Jevon Plog, Alexander L. Yarin and Yayue Pan

Journal of Manufacturing Processes, 2021, 69, 173
DOI: 10.1016/j.jmapro.2021.07.028

3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering

Annan Chen, Jin Su, Yinjin Li, Haibo Zhang, Yusheng Shi, Chunze Yan and Jian Lu

Int. J. Extrem. Manuf., 2023, 5, 032007
DOI: 10.1088/2631-7990/acd88f

Metallic nanoparticle inks for flexible printed electronics

Ruimin Cai, Cunman Liang, Yongqing Duan, Zhijun Zhao, Xi Zhang, Pei He, JunLiang Yang, Wen‐Yong Lai, Jun Wei and Liang Tian

FlexMat, 2025, 2, 225
DOI: 10.1002/flm2.40

3D printed catalytic stirrers with permeable blades made of porous carbon

Raúl Llamas-Unzueta, Alejandro Reguera-García, Isabel Sanz, Celia Martin, Asuncion Quintanilla, J. Angel Menéndez and Miguel A. Montes-Morán

Additive Manufacturing, 2024, 87, 104233
DOI: 10.1016/j.addma.2024.104233

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi, Alianna Maguire, Neethu T. Pottackal, Md Shajedul Hoque Thakur, Maruf Md. Ikram, A. John Hart, Pulickel M. Ajayan and Muhammad M. Rahman

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202108855

3D printing of free-standing Ti3C2Tx/PEO architecture for electromagnetic interference shielding

Sung Yong Hong, Yan Sun, Jinwoo Lee, Ma Yifei, Mei Wang, Jae-Do Nam and Jonghwan Suhr

Polymer, 2021, 236, 124312
DOI: 10.1016/j.polymer.2021.124312

Advancing High-Performance Composites in Additive Manufacturing (AM) Through Pre-Impregnation and Direct Ink Writing for Scalable 3D Printing

Yuanrui Wang, Yuchen Ding, Kai Yu and Guoying Dong

J. Compos. Sci., 2025, 9, 218
DOI: 10.3390/jcs9050218

High temperature co-firing of 3D-printed Al ZnO/Al2O3 multi-material two-phase flow sensor

Danwei Zhang, Win Jonhson, Tun Seng Herng, Xi Xu, Xiaojing Liu, Liang-ming Pan, Hui He and Jun Ding

Journal of Materiomics, 2022, 8, 710
DOI: 10.1016/j.jmat.2021.10.004

Boron carbon oxynitride anti-counterfeiting monoliths manufactured by precursor decomposition and direct ink writing

Kaili Xu, Kai Jia, Ping Zhang, Xiaohu Yan, Chunhua Ge, Hongyu Guan, Xinyu Wang and Xiangdong Zhang

Journal of Luminescence, 2022, 252, 119284
DOI: 10.1016/j.jlumin.2022.119284

3D printing of porous low-temperature in-situ mullite ceramic using waste rice husk ash-derived silica

Sk S. Hossain, In-Woo Baek, Hyeon-Jin Son, Sujin Park and Chang-Jun Bae

Journal of the European Ceramic Society, 2022, 42, 2408
DOI: 10.1016/j.jeurceramsoc.2022.01.001

Fabrication of meso/macroporous TiO2/PCL composite scaffolds by direct ink writing: The effects of porogen content on the compressive modulus and in vitro behavior

Zahra Yahay, Hamidreza Tolabi, Farhan Delavar, S. Ali Poursamar, Seyed Mehdi Mirhadi and Fariborz Tavangarian

Materials Today Communications, 2023, 35, 105769
DOI: 10.1016/j.mtcomm.2023.105769

Ceramics Processing by Additive Manufacturing

Pradyot Datta and Vamsi K. Balla

Trans Indian Natl. Acad. Eng., 2021, 6, 879
DOI: 10.1007/s41403-021-00225-y

Predicting Colloidal Ink 3D Printing Behavior Using Simple Piecewise Power Law Constitutive Model

M. Naimul Hoque, Adolofo Cazares and Gordon F. Christopher

J. of Materi Eng and Perform, 2025, 34, 1301
DOI: 10.1007/s11665-023-09116-5

Interfacial behavior between thermoplastics and thermosets fabricated by material extrusion-based multi-process additive manufacturing

Qingyang Liu, Chenglong Duan, Felix Richter, Wen Shen and Dazhong Wu

Additive Manufacturing, 2024, 96, 104568
DOI: 10.1016/j.addma.2024.104568

Extrusion-based 3D printing alumina-silica inks: Adjusting rheology and sinterability incorporating waste derived nanoparticles

Sk S. Hossain, Hyeon-Jin Son, Sujin Park and Chang-Jun Bae

Journal of the European Ceramic Society, 2023, 43, 4865
DOI: 10.1016/j.jeurceramsoc.2023.03.068

Direct ink writing of bioceramic prosthetics and scaffolds: advances, challenges, and biomedical applications

D. L. Belgin Paul and Praveen Ayyappan Susila

Prog Addit Manuf, 2025, 10, 5829
DOI: 10.1007/s40964-025-01002-x

Rotational Co-extrusion 4D printing of heterogeneous filaments to enable sophisticated shape morphing

Luquan Ren, Wangxuan Li, Huili Liu, Bingqian Li, Xueli Zhou, Lei Ren, Zhiwu Han, Zhengyi Song and Qingping Liu

Additive Manufacturing, 2023, 73, 103661
DOI: 10.1016/j.addma.2023.103661

Extrusion-based printing of multi-material ATZ/3Y-TZP ceramics

Berfu Göksel, Sina AhmadvashAghbash, Mia Kovač, Bart Van Meerbeek, Jozef Vleugels and Annabel Braem

Ceramics International, 2025
DOI: 10.1016/j.ceramint.2025.08.031

Direct Ink Writing for High-Efficiency Microwave Attenuation with Nanofibers Alignment

Gwendolyn Jia Hao Lim, Zeshi Yang, Yi Hou, Pon Janani Sugumaran, Zhi Qiao, Jun Ding, Wentao Yan and Yong Yang

ACS Appl. Mater. Interfaces, 2022, 14, 31267
DOI: 10.1021/acsami.2c06567

The effect of graphene properties on the extrusion of a shape memory epoxy vitrimer

Yinglun Hong, Itxaso Azcune, Alaitz Rekondo and Eduardo Saiz

Materials & Design, 2024, 246, 113344
DOI: 10.1016/j.matdes.2024.113344

3D printing in photocatalysis: Methods and capabilities for the improved performance

Jhon Mauricio Aguirre-Cortés, Adriana Isabel Moral-Rodríguez, Esther Bailón-García, Arantxa Davó-Quiñonero, Agustín Francisco Pérez-Cadenas and Francisco Carrasco-Marín

Applied Materials Today, 2023, 32, 101831
DOI: 10.1016/j.apmt.2023.101831

The influence of particle size distribution on rheological properties of fused silica pastes for direct ink writing

Anasheh Khecho, Seyed Amir Ghaffari and Bijan Eftekhari Yekta

Int J Applied Ceramic Tech, 2022
DOI: 10.1111/ijac.14109

4D printing of shape memory polymer composites: A review on fabrication techniques, applications, and future perspectives

Muhammad Yasir Khalid, Zia Ullah Arif, Reza Noroozi, Ali Zolfagharian and Mahdi Bodaghi

Journal of Manufacturing Processes, 2022, 81, 759
DOI: 10.1016/j.jmapro.2022.07.035

Oozing control and retraction in colloid 3D printing: parametric analysis

Mohammed Al-Ali and Yara Almubarak

Prog Addit Manuf, 2025, 10, 5217
DOI: 10.1007/s40964-024-00898-1

Scientometric Analysis and Systematic Review of Multi-Material Additive Manufacturing of Polymers

Yufan Zheng, Wenkang Zhang, David Moises Baca Lopez and Rafiq Ahmad

Polymers, 2021, 13, 1957
DOI: 10.3390/polym13121957

Sustainable Robots 4D Printing

Hesam Soleimanzadeh, Bernard Rolfe, Mahdi Bodaghi, Marzieh Jamalabadi, Xiang Zhang and Ali Zolfagharian

Advanced Sustainable Systems, 2023, 7
DOI: 10.1002/adsu.202300289

Multi-material additive manufacturing with lightweight closed-cell foam-filled lattice structures for enhanced mechanical and functional properties

Mayur Jiyalal Prajapati, Ajeet Kumar, Shang-Chih Lin and Jeng-Ywan Jeng

Additive Manufacturing, 2022, 54, 102766
DOI: 10.1016/j.addma.2022.102766

Material Behavior of Magnetoresponsive Polymer Composites in Extrusion-Based Direct Writing

Anasheh Khecho and Erina Baynojir Joyee

Journal of Manufacturing Science and Engineering, 2025, 147
DOI: 10.1115/1.4069042

Porous Polymer Structures with Tunable Mechanical Properties Using a Water Emulsion Ink

Joshua Z. R. Dantzler, Sofia Gabriela Gomez, Stephanie Gonzalez, Diego Gonzalez, Alan O. Loera Martinez, Cory Marquez, Md Sahid Hassan, Saqlain Zaman, Alexis Lopez, Md Shahjahan Mahmud and Yirong Lin

Materials, 2024, 17, 1074
DOI: 10.3390/ma17051074

Beyond Skin Pressure Sensing: 3D Printed Laminated Graphene Pressure Sensing Material Combines Extremely Low Detection Limits with Wide Detection Range

Kunli Cao, Miao Wu, Jiabao Bai, Zhen Wen, Jianwei Zhang, Tianyi Wang, Meiwen Peng, Tao Liu, Zheng Jia, Zhiqiang Liang and Lin Jiang

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202202360

Multi-material 3D printing of piezoelectric and triboelectric integrated nanogenerators with voxel structure

Fang Chen, Zimo An, Yinghong Chen, Yijun Li, Xingang Liu, Ning Chen, Yue Ru and Dali Gao

Chemical Engineering Journal, 2023, 471, 144770
DOI: 10.1016/j.cej.2023.144770

In‐situ curing of3Dprinted freestanding thermosets

Chongjie Gao, Jingjing Qiu and Shiren Wang

J Adv Manuf & Process, 2022, 4
DOI: 10.1002/amp2.10114

Graded biological materials and additive manufacturing technologies for producing bioinspired graded materials: An overview

Lei Ren, Zhenguo Wang, Luquan Ren, Zhiwu Han, Qingping Liu and Zhengyi Song

Composites Part B: Engineering, 2022, 242, 110086
DOI: 10.1016/j.compositesb.2022.110086

Solid-state electrolytes with vertically aligned Li+ transport channels for lithium batteries: A comprehensive review

Di Jiang, Xiaofei Wang, Song Yin, Liqing Yin, Xiaojie Bai, Zhangkuo Han, Shusen Zhou, Jiahan Zheng, Libing Liao and Hao Liu

Energy Storage Materials, 2025, 74, 103986
DOI: 10.1016/j.ensm.2024.103986

Novel Approaches in 3D Printing Techniques for the Development of High-Performance Micro-Batteries

Anupama Shaju, Rehana P Ummer, Sabu Thomas and Balasubramanian Kandasubramanian

J. Electron. Mater., 2025, 54, 1531
DOI: 10.1007/s11664-024-11659-9

Co-extrusion of highly loaded feedstocks for fabrication of stainless steel-bioceramic core-shell structures

Lisa Biasetto, Vanessa Gastaldi and Hamada Elsayed

Journal of Materials Research and Technology, 2024, 33, 6820
DOI: 10.1016/j.jmrt.2024.10.255

Polyvinyl alcohol-modified PEDOT:PSS inks for 3D printing of organic electrochemical transistors and thermoelectric devices

Hengyi Ma, Yani Wang, Kun Xie, Danqi Cui, Haoyu Zheng, Kaiming Yang and Kai Xu

Flex. Print. Electron., 2025, 10, 035010
DOI: 10.1088/2058-8585/ae004a

A simple putty to enable the shaping of silica glass

Iuliia S. Tirichenko, Yinglun Hong, Christopher Butler and Eduardo Saiz

Materials & Design, 2025, 258, 114687
DOI: 10.1016/j.matdes.2025.114687

A Review on Progress, Challenges, and Prospects of Material Jetting of Copper and Tungsten

V. Vinay K. Doddapaneni, Kijoon Lee, Havva Eda Aysal, Brian K. Paul, Somayeh Pasebani, Konstantinos A. Sierros, Chinedum E. Okwudire and Chih-hung Chang

Nanomaterials, 2023, 13, 2303
DOI: 10.3390/nano13162303

Adsorption film with sub-milli-interface morphologies via direct ink writing for indoor formaldehyde removal

Qiwei Chen, Enze Tian, Ziyi Luo and Jinhan Mo

Journal of Hazardous Materials, 2022, 427, 128190
DOI: 10.1016/j.jhazmat.2021.128190

Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments

Mauricio A. Sarabia-Vallejos, Fernando E. Rodríguez-Umanzor, Carmen M. González-Henríquez and Juan Rodríguez-Hernández

Polymers, 2022, 14, 1351
DOI: 10.3390/polym14071351

Unifying dispersion properties of graphene oxide suspensions via interlayer spacing control: Insights for universal 2D colloid behavior

Yul Hui Shim, Eun Ho Cho and So Youn Kim

Carbon, 2023, 215, 118473
DOI: 10.1016/j.carbon.2023.118473

Deployable and Retrievable 3D-Printed Zeolite–Polymer Composites for Wastewater Treatment: A Review

Tomi Setiawan, Giovanno Alvin Setiadi and Rino Rakhmata Mukti

Ind. Eng. Chem. Res., 2023, 62, 18159
DOI: 10.1021/acs.iecr.3c02317

Intrinsically Stretchable Light‐Emitting Polymer Semiconductors with High Charge Mobility Through Micro‐Crystalline Aggregation‐Limited Morphology

Xiaofang Wei, Wei Wen, Wenkang Shi, Yanwei Liu, Jianzhe Sun, Xiaojuan Dai, Yunlong Guo and Yunqi Liu

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202310558

Recent progress in 4D printed energy-absorbing metamaterials and structures

Chukwuemeke William Isaac and Fabian Duddeck

Virtual and Physical Prototyping, 2023, 18
DOI: 10.1080/17452759.2023.2197436

New 3D Ink Formulation Comprising a Nanocellulose Aerogel Based on Electrostatic Repulsion and Sol-Gel Transition

Qing Yang, Haiyang Yu, Xiaolu Wang, Yunze Li, Dan Li and Fu Guo

Polymers, 2025, 17, 1065
DOI: 10.3390/polym17081065

Extrusion‐Based Additive Manufacturing of Carbonaceous and Non‐Carbonaceous Electrode Materials for Electrochemical Energy Storage Devices

Ali Asghar, Karim Khan, Muhammad Shahid Rashid, Muhammad Hamza, Zhiyuan Liu, Changyong Liu and Zhangwei Chen

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202400136

Coaxial direct ink writing of shear stiffening gel/Ecoflex composite for customized insoles

Shuaishuai Zhang, Liang Lu, Sheng Wang, Fang Yuan, Shouhu Xuan and Xinglong Gong

Composites Part B: Engineering, 2021, 225, 109268
DOI: 10.1016/j.compositesb.2021.109268

Research, standards, and data needs for industrialization of ceramic direct ink writing

Andrew J. Allen, Igor Levin and Russell A. Maier

Int J Ceramic Engine & Sci, 2022, 4, 302
DOI: 10.1002/ces2.10158

Microscale additively manufactured 3D metal-ceramic nanocomposites with improved strength and thermal stability

Nadia Rohbeck, Maria Watroba, Christopher Gunderson, Alexander Groetsch, Manish Jain, Janne-Petteri Niemelä, Aurelio Borzi, Ivo Utke, Xavier Maeder, Antonia Neels, Johann Michler and Jakob Schwiedrzik

Additive Manufacturing, 2025, 104957
DOI: 10.1016/j.addma.2025.104957

Upconversion 3D printing enables single-immersion multi-material stereolithography

Adilet Zhakeyev, Mansour Abdulrhman, Yuqi Zhang, Feng Li, Guanying Chen and Jose Marques-Hueso

Applied Materials Today, 2023, 32, 101854
DOI: 10.1016/j.apmt.2023.101854

A Review of 3D Printing Batteries

Maryam Mottaghi and Joshua M. Pearce

Batteries, 2024, 10, 110
DOI: 10.3390/batteries10030110

Recent progress of alumina ceramics by direct ink writing: Ink design, printing and post-processing

Sk S. Hossain and Kathy Lu

Ceramics International, 2023, 49, 10199
DOI: 10.1016/j.ceramint.2023.01.143

Rheology and printability: A survey of critical relationships for direct ink write materials design

Daniel A. Rau, Christopher B. Williams and Michael J. Bortner

Progress in Materials Science, 2023, 140, 101188
DOI: 10.1016/j.pmatsci.2023.101188

3D Printing of Gradient-Doped Yb:YAG Laser Ceramics by Leveraging Active Mixing

Mengmeng Xie, Haohao Ji, Dewen Wang, Junping Wang, Jian Zhang, Yu Liu, Dianzi Liu, Shiwei Wang, Nianjiang Chen, Lei Wang and Yuan Gao

Additive Manufacturing Frontiers, 2024, 3, 200118
DOI: 10.1016/j.amf.2024.200118

Ceramics—The Forgotten but Essential Ingredients for a Circular Economy on the Moon

Alex Ellery

Ceramics, 2025, 8, 107
DOI: 10.3390/ceramics8030107

All printed soft actuators based on ionic liquid/polymer hybrid materials

D.M. Correia, L.C. Fernandes, N. Pereira, J.C. Barbosa, J.P. Serra, R.S. Pinto, C.M. Costa and S. Lanceros-Méndez

Applied Materials Today, 2021, 22, 100928
DOI: 10.1016/j.apmt.2020.100928

A deep insight into the preparation of ceramic bone scaffolds utilizing robocasting technique

Mahdieh Hajian Monfared, Alireza Nemati, Fatemeh Loghman, Melina Ghasemian, Ali Farzin, Nima Beheshtizadeh and Mahmoud Azami

Ceramics International, 2022, 48, 5939
DOI: 10.1016/j.ceramint.2021.11.268

Closed-loop direct ink extruder system with multi-part materials mixing

Markellos Ntagios, Habib Nassar and Ravinder Dahiya

Additive Manufacturing, 2023, 64, 103437
DOI: 10.1016/j.addma.2023.103437

High-precision direct ink writing of Li6.4La3Zr1.4Ta0.6O12

Bo Chen and Norbert Willenbacher

Journal of the European Ceramic Society, 2022, 42, 7491
DOI: 10.1016/j.jeurceramsoc.2022.09.018

Polymer microsphere inks for semi-solid extrusion 3D printing at ambient conditions

Juuso Pohjola, Mika Jokinen, Tero Soukka and Mikael Stolt

Journal of the Mechanical Behavior of Biomedical Materials, 2024, 160, 106783
DOI: 10.1016/j.jmbbm.2024.106783

Bioinspired toughening of soft elastomer via embedded three‐dimensional printing

Liang Zhang, Yaxin Zhang, Min Gong, Meiling Liu, Xiang Lin, Dongrui Wang and Penghao Hu

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.52273

3D Printing of Physical Organ Models: Recent Developments and Challenges

Zhongboyu Jin, Yuanrong Li, Kang Yu, Linxiang Liu, Jianzhong Fu, Xinhua Yao, Aiguo Zhang and Yong He

Advanced Science, 2021, 8
DOI: 10.1002/advs.202101394

Bi-metallic lattice structures manufactured via an intralayer multi-material powder bed fusion method

Brian McDonnell, Vito Errico, Paolo Posa, Andrea Angelastro, Agnieszka Furman, Eimear O’Hara, Sabina Luisa Campanelli and Noel Harrison

Additive Manufacturing, 2024, 89, 104301
DOI: 10.1016/j.addma.2024.104301

Printing Reconfigurable Bundles of Dielectric Elastomer Fibers

Alex Chortos, Jie Mao, Jochen Mueller, Ehsan Hajiesmaili, Jennifer A. Lewis and David R. Clarke

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202010643

Direct ink writing of sustainable multifunctional biodegradable porous Fe-eggshell scaffolds

Niko E. Putra, Raphaëlle Youf, Vahid Moosabeiki, Marius A. Leeflang, Maria Klimopoulou, Mohammad J. Mirzaali, Arjan Mol, Martijn Riool, Lidy E. Fratila-Apachitei, Jie Zhou, Iulian Apachitei and Amir A. Zadpoor

Acta Biomaterialia, 2025, 202, 622
DOI: 10.1016/j.actbio.2025.06.051

Direct‐Ink‐Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Rafael S. Pinto, João P. Serra, João C. Barbosa, Renato Gonçalves, Maria M. Silva, Senentxu Lanceros‐Méndez and Carlos M. Costa

Macro Materials & Eng, 2021, 306
DOI: 10.1002/mame.202100372

Additive Manufacturing of Bulk Thermoelectric Architectures: A Review

Cagri Oztan, Ryan Welch and Saniya LeBlanc

Energies, 2022, 15, 3121
DOI: 10.3390/en15093121

A comprehensive review on supercapacitors: Their promise to flexibility, high temperature, materials, design, and challenges

Hafsah A. Khan, Muhammad Tawalbeh, Bashar Aljawrneh, Waad Abuwatfa, Amani Al-Othman, Hasan Sadeghifar and Abdul Ghani Olabi

Energy, 2024, 295, 131043
DOI: 10.1016/j.energy.2024.131043