Bernhard Gutmann, Manuel Köckinger, Gabriel Glotz, Tania Ciaglia, Eyke Slama, Matej Zadravec, Stefan Pfanner, Manuel C. Maier, Heidrun Gruber-Wölfler and C. Oliver Kappe

React. Chem. Eng., 2017, 2, 919
DOI: 10.1039/C7RE00176B

3D printing for flow biocatalysis

Elena Gkantzou, Marie Weinhart and Selin Kara

RSC Sustainability, 2023, 1, 1672
DOI: 10.1039/D3SU00155E

Continuous flow-mode synthesis of (chiral) amines with transaminase: a strategic biocatalytic approach to essential building blocks

Hippolyte Meersseman Arango, Ludivine van den Biggelaar, Patrice Soumillion, Patricia Luis, Tom Leyssens, Francesca Paradisi and Damien P. Debecker

React. Chem. Eng., 2023, 8, 1505
DOI: 10.1039/D3RE00210A

Soft and effective detoxification of a VX simulant in a nylon 3D printed basic flow reactor

Sergui Mansour, Antonin Delaune, Maxime Manneveau, Baptiste Picard, Amélie Claudel, Cécile Vallières, Léa Sigot, Pierre-Yves Renard and Julien Legros

Green Chem., 2021, 23, 7522
DOI: 10.1039/D1GC01961A

Will the next generation of chemical plants be in miniaturized flow reactors?

Jean-Christophe M. Monbaliu and Julien Legros

Lab Chip, 2023, 23, 1349
DOI: 10.1039/D2LC00796G

A sustainable innovation for the tandem synthesis of sugar-containing coumarin derivatives catalyzed by lipozyme TL IM fromThermomyces lanuginosusin continuous-flow microreactors

Li-Hua Du, Ping-Feng Chen, Rui-Jie Long, Miao Xue and Xi-Ping Luo

RSC Adv., 2020, 10, 13252
DOI: 10.1039/D0RA00879F

Enzyme immobilization on a 3D-printed reactor for aldehyde oxidation to carboxylic acid under mild conditions

Kou Nakahara, Kotchakorn T.sriwong, Muhammad Arisyi Hawari, Akira Tanaka and Tomoko Matsuda

React. Chem. Eng., 2023, 8, 543
DOI: 10.1039/D2RE00547F

Herstellung direkt nutzbarer Durchflussreaktorkartuschen durch 3D‐Druck von thermostabilen Enzymen

Manfred Maier, Carsten P. Radtke, Jürgen Hubbuch, Christof M. Niemeyer and Kersten S. Rabe

Angewandte Chemie, 2018, 130, 5638
DOI: 10.1002/ange.201711072

3D printed PLA enzyme microreactors: Characterization and application for the modification of bioactive compounds

Elena Gkantzou, Anastasia Skonta, Aliki Tsakni, Angeliki Polydera, Dimitrios Moschovas, Konstantinos Spyrou, Apostolos Avgeropoulos, Dimitrios Gournis, Dimitra Houhoula and Haralambos Stamatis

Journal of Biotechnology, 2022, 350, 75
DOI: 10.1016/j.jbiotec.2022.04.005

Biocatalytic synthesis of the Green Note trans-2-hexenal in a continuous-flow microreactor

Morten M C H van Schie, Tiago Pedroso de Almeida, Gabriele Laudadio, Florian Tieves, Elena Fernández-Fueyo, Timothy Noël, Isabel W C E Arends and Frank Hollmann

Beilstein J. Org. Chem., 2018, 14, 697
DOI: 10.3762/bjoc.14.58

Hierarchically engineered enzyme-packed bed reactor via 3D scaffold design and zwitterionic microenvironment for sustainable continuous catalysis

Jicheng Dong, Xinlong Zhang, Fang Cheng, Lijun Zhang, Huan Tang, Chunmei Li and Gang Cheng

Bioresource Technology, 2025, 431, 132587
DOI: 10.1016/j.biortech.2025.132587

Flow Synthesis of Capsaicin and Capsaicinoid Analogues

Máté János Orosz, Bettina Rávai, Béla Mátravölgyi and Erika Bálint

ACS Sustainable Chem. Eng., 2024, 12, 7913
DOI: 10.1021/acssuschemeng.4c01839

Transaminases for chiral amine synthesis

Andrew Gomm and Elaine O’Reilly

Current Opinion in Chemical Biology, 2018, 43, 106
DOI: 10.1016/j.cbpa.2017.12.007

Electrochemical Oscillatory Baffled Reactors Fabricated with Additive Manufacturing for Efficient Continuous-Flow Oxidations

Elena Alvarez, Maria Romero-Fernandez, Diego Iglesias, Raul Martinez-Cuenca, Obinna Okafor, Astrid Delorme, Pedro Lozano, Ruth Goodridge, Francesca Paradisi, Darren A. Walsh and Victor Sans

ACS Sustainable Chem. Eng., 2022, 10, 2388
DOI: 10.1021/acssuschemeng.1c06799

Recent Developments in Process Digitalisation for Advanced Nanomaterial Syntheses

Diego Iglesias, Dina Haddad and Victor Sans

Chemistry Methods, 2022, 2
DOI: 10.1002/cmtd.202200031

Advances in 3D Gel Printing for Enzyme Immobilization

Jialong Shen, Sen Zhang, Xiaomeng Fang and Sonja Salmon

Gels, 2022, 8, 460
DOI: 10.3390/gels8080460

Biocatalysis Using Immobilized Enzymes in Continuous Flow for the Synthesis of Fine Chemicals

Matthew P. Thompson, Itziar Peñafiel, Sebastian C. Cosgrove and Nicholas J. Turner

Org. Process Res. Dev., 2019, 23, 9
DOI: 10.1021/acs.oprd.8b00305

Protein immobilization technology for flow biocatalysis

María Romero-Fernández and Francesca Paradisi

Current Opinion in Chemical Biology, 2020, 55, 1
DOI: 10.1016/j.cbpa.2019.11.008

Biocatalytic Performance of β-Glucosidase Immobilized on 3D-Printed Single- and Multi-Channel Polylactic Acid Microreactors

Andreas-Georgios Vasios, Anastasia Skonta, Michaela Patila and Haralambos Stamatis

Micromachines, 2024, 15, 288
DOI: 10.3390/mi15020288

Emerging trends in flow chemistry enabled by 3D printing: Robust reactors, biocatalysis and electrochemistry

Victor Sans

Current Opinion in Green and Sustainable Chemistry, 2020, 25, 100367
DOI: 10.1016/j.cogsc.2020.100367

3D Printing in Biocatalysis and Biosensing: From General Concepts to Practical Applications

Jonathan Nyenhuis, Christopher Heuer and Janina Bahnemann

Chemistry An Asian Journal, 2024, 19
DOI: 10.1002/asia.202400717

Experimental and computational analysis of coated milli-structured bioreactor with immobilized nitrilase for continuous production of nicotinic acid

Maïté Michaud, Chalore Teepakorn, Véronique De Berardinis, Anne Zaparucha, Guillaume Nonglaton, Pierre Coste and Zoé Anxionnaz-Minvielle

Chemical Engineering Journal Advances, 2025, 22, 100766
DOI: 10.1016/j.ceja.2025.100766

3D printing and enzyme immobilization: An overview of current trends

Daniela Remonatto, Bárbara Fernandes Izidoro, Vítor Teixeira Mazziero, Bianca Pavan Catarino, João Francisco Cabral do Nascimento, Marcel Otávio Cerri, Grazielle Santos Silva Andrade and Ariela Veloso de Paula

Bioprinting, 2023, 33, e00289
DOI: 10.1016/j.bprint.2023.e00289

3D printing for chemical, pharmaceutical and biological applications

Andrew J. Capel, Rowan P. Rimington, Mark P. Lewis and Steven D. R. Christie

Nat Rev Chem, 2018, 2, 422
DOI: 10.1038/s41570-018-0058-y

Digital and lean development method for 3D-printed reactors based on CAD modeling and CFD simulation

Sven Bettermann, Felix Kandelhard, Hans-Ulrich Moritz and Werner Pauer

Chemical Engineering Research and Design, 2019, 152, 71
DOI: 10.1016/j.cherd.2019.09.024

A Perspective on Continuous Flow Chemistry in the Pharmaceutical Industry

Marcus Baumann, Thomas S. Moody, Megan Smyth and Scott Wharry

Org. Process Res. Dev., 2020, 24, 1802
DOI: 10.1021/acs.oprd.9b00524

3D Printing to Increase the Flexibility of the Chemical Synthesis of Biologically Active Molecules: Design of On-Demand Gas Generation Reactors

Kirill S. Erokhin, Evgeniy G. Gordeev, Dmitriy E. Samoylenko, Konstantin S. Rodygin and Valentine P. Ananikov

IJMS, 2021, 22, 9919
DOI: 10.3390/ijms22189919

Advantages of Hydrogel-Based 3D-Printed Enzyme Reactors and Their Limitations for Biocatalysis

Barbara Schmieg, Johannes Döbber, Frank Kirschhöfer, Martina Pohl and Matthias Franzreb

Front. Bioeng. Biotechnol., 2019, 6
DOI: 10.3389/fbioe.2018.00211

Carrier‐Free Enzyme Immobilizates for Flow Chemistry

Gizem Ölçücü, Ulrich Krauss, Karl-Erich Jaeger and Jörg Pietruszka

Chemie Ingenieur Technik, 2023, 95, 531
DOI: 10.1002/cite.202200167

Wall‐Immobilized Biocatalyst vs. Packed Bed in Miniaturized Continuous Reactors: Performances and Scale‐Up

Maïté Michaud, Guillaume Nonglaton and Zoé Anxionnaz‐Minvielle

ChemBioChem, 2024, 25
DOI: 10.1002/cbic.202400086

Densely Packed Chemical Synthesis Equipment by 3D Spatial Design and Additive Manufacturing: Acetylene Generation Cartridge

Kirill S. Erokhin and Valentine P. Ananikov

Org. Process Res. Dev., 2023, 27, 1144
DOI: 10.1021/acs.oprd.3c00112

Laser-Induced Carbon Electrodes in a Three-Dimensionally Printed Flow Reactor for Detecting Lead Ions

Baojun Ding, Qiunan Zhang, Cheng Yang, Wenbo Yang, Junbo Liu, Chong Li and Shengyang Tao

ACS Omega, 2021, 6, 12470
DOI: 10.1021/acsomega.0c06274

Sustainable Materials and Chemical Processes for Additive Manufacturing

Eva Sanchez-Rexach, Trevor G. Johnston, Coralie Jehanno, Haritz Sardon and Alshakim Nelson

Chem. Mater., 2020, 32, 7105
DOI: 10.1021/acs.chemmater.0c02008

Protein Immobilization on 3D‐Printed Biomedical Resins for Biochip Applications

Shahzad Hussain, Mary Josephine McIvor, Gourav Bhattacharya, Sara E. McNamee, Brian J. Meenan and Adrian R. Boyd

Surface & Interface Analysis, 2025, 57, 343
DOI: 10.1002/sia.7390

On‐Demand Production of Flow‐Reactor Cartridges by 3D Printing of Thermostable Enzymes

Manfred Maier, Carsten P. Radtke, Jürgen Hubbuch, Christof M. Niemeyer and Kersten S. Rabe

Angew Chem Int Ed, 2018, 57, 5539
DOI: 10.1002/anie.201711072

Revealing interactions of layered polymeric materials at solid-liquid interface for building solvent compatibility charts for 3D printing applications

Kirill S. Erokhin, Evgeniy G. Gordeev and Valentine P. Ananikov

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-56350-w

Integrating biocatalysis with continuous flow: current status, challenges, and future perspectives

Jing Bai, Chen Huang, Yunting Liu, Xiaobing Zheng, Jianqiao Liu, Liya Zhou, Jinlong Liu and Yanjun Jiang

Journal of Advanced Research, 2025
DOI: 10.1016/j.jare.2025.07.010

Breakthroughs into laccase immobilization: a glance of techniques and interconnected carriers

Kalyanee Bera, Debalina Bhattacharya and Mainak Mukhopadhyay

Braz. J. Chem. Eng., 2025
DOI: 10.1007/s43153-025-00588-7

Photobiocatalysis in Continuous Flow

Santiago Nahuel Chanquia, Alessia Valotta, Heidrun Gruber-Woelfler and Selin Kara

Front. Catal., 2022, 1
DOI: 10.3389/fctls.2021.816538

A Versatile Approach for Enzyme Immobilization Using Chemically Modified 3D-Printed Scaffolds

Jiajie Ye, Tianshu Chu, Jianlin Chu, Bingbing Gao and Bingfang He

ACS Sustainable Chem. Eng., 2019, 7, 18048
DOI: 10.1021/acssuschemeng.9b04980

Feasibility and Biocompatibility of 3D‐Printed Photopolymerized and Laser Sintered Polymers for Neuronal, Myogenic, and Hepatic Cell Types

Rowan P. Rimington, Andrew J. Capel, Darren J. Player, Richard J. Bibb, Steven D. R. Christie and Mark P. Lewis

Macromolecular Bioscience, 2018, 18
DOI: 10.1002/mabi.201800113

Exploring current tendencies in techniques and materials for immobilization of laccases – A review

Lynette Alvarado-Ramírez, Magdalena Rostro-Alanis, José Rodríguez-Rodríguez, Carlos Castillo-Zacarías, Juan Eduardo Sosa-Hernández, Damià Barceló, Hafiz M.N. Iqbal and Roberto Parra-Saldívar

International Journal of Biological Macromolecules, 2021, 181, 683
DOI: 10.1016/j.ijbiomac.2021.03.175

Recent Advances in Enzyme Immobilization Utilizing Nanotechnology for Biocatalysis

Kotchakorn T.sriwong and Tomoko Matsuda

Org. Process Res. Dev., 2022, 26, 1857
DOI: 10.1021/acs.oprd.1c00404

3D Printing: An Emerging Technology for Biocatalyst Immobilization

Tomás Pose‐Boirazian, Jose Martínez‐Costas and Gemma Eibes

Macromolecular Bioscience, 2022, 22
DOI: 10.1002/mabi.202200110

Investigation of Contact Angles and Surface Morphology of 3D-Printed Materials

Johannes Neukäufer, Bernhard Seyfang and Thomas Grützner

Ind. Eng. Chem. Res., 2020, 59, 6761
DOI: 10.1021/acs.iecr.0c00430

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Evgeniy G. Gordeev and Valentine P. Ananikov

Russ. Chem. Rev., 2020, 89, 1507
DOI: 10.1070/RCR4980

Novel external-loop-airlift milliliter scale bioreactors for cell growth studies: Low cost design, CFD analysis and experimental characterization

Jorge Eduardo Marroquín-Fandiño, Carlos Manuel Ramírez-Acosta, Hector Javier Luna-Wandurraga, Joaquín Andrés Valderrama-Rincón, Juan C. Cruz, Luis H. Reyes and Juan D. Valderrama-Rincon

Journal of Biotechnology, 2020, 324, 71
DOI: 10.1016/j.jbiotec.2020.09.022

New frontiers in sustainable process engineering with additive manufacturing for continuous-flow applications

Cristopher Tinajero, Gianluca Palmara, Marcileia Zanatta and Victor Sans

Chemical Engineering Journal, 2025, 505, 159442
DOI: 10.1016/j.cej.2025.159442

Characterization and evaluation of immobilized enzymes for applications in flow reactors

Juan M. Bolivar and Fernando López-Gallego

Current Opinion in Green and Sustainable Chemistry, 2020, 25, 100349
DOI: 10.1016/j.cogsc.2020.04.010

Flow Biocatalysis: A Challenging Alternative for the Synthesis of APIs and Natural Compounds

Micol Santi, Luca Sancineto, Vanessa Nascimento, Juliano Braun Azeredo, Erika V. M. Orozco, Leandro H. Andrade, Harald Gröger and Claudio Santi

IJMS, 2021, 22, 990
DOI: 10.3390/ijms22030990

Differentiation of Bioengineered Skeletal Muscle within a 3D Printed Perfusion Bioreactor Reduces Atrophic and Inflammatory Gene Expression

Rowan P. Rimington, Andrew J. Capel, Kerry F. Chaplin, Jacob W. Fleming, H. C. Hemaka Bandulasena, Richard J. Bibb, Steven D. R. Christie and Mark P. Lewis

ACS Biomater. Sci. Eng., 2019, 5, 5525
DOI: 10.1021/acsbiomaterials.9b00975

Self-Sufficient and Autosensing Biocatalytic Inks for 3D-Printed Monolithic Bioreactors

Daniel Andrés-Sanz, Clara García-Astrain, Uxue Aizarna-Lopetegui, Elisa Lenzi, Dorleta Jimenez de Aberasturi and Fernando López-Gallego

ACS Appl. Mater. Interfaces, 2025, 17, 32350
DOI: 10.1021/acsami.5c03485

Emerging 3D Printing Strategies for Enzyme Immobilization: Materials, Methods, and Applications

Yun Shao, Zhijun Liao, Bingbing Gao and Bingfang He

ACS Omega, 2022, 7, 11530
DOI: 10.1021/acsomega.2c00357

Efficient Synthesis of (S)-1-Boc-3-aminopiperidine in a Continuous Flow System Using ω-Transaminase-Immobilized Amino-Ethylenediamine-Modified Epoxide Supports

Xiangxiang Wang, Youyu Xie, Zhicai Wang, Ke Zhang, Hualei Wang and Dongzhi Wei

Org. Process Res. Dev., 2022, 26, 1351
DOI: 10.1021/acs.oprd.1c00217

3D‐Printable Photochromic Molecular Materials for Reversible Information Storage

Dominic J. Wales, Qun Cao, Katharina Kastner, Erno Karjalainen, Graham N. Newton and Victor Sans

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201800159

Recent advances in immobilized ω-transaminase for chiral amine synthesis

W. Khanam and N.C. Dubey

Materials Today Chemistry, 2022, 24, 100922
DOI: 10.1016/j.mtchem.2022.100922