Issue 23, 2019

Surface modification of self-assembled isoporous polymer membranes for pressure-dependent high-resolution separation

Abstract

Polymer membranes with narrow pore size distribution have received considerable attention because of their high-resolution and high-efficiency separation performance. By elaborately adjusting the parameters in the membrane formation process, we fabricated self-assembled perforated membranes with a series of pore diameters via the breath figure method. The membranes have very narrow pore size distribution and can be considered isoporous membranes. Membranes with controllable surface chemistry were further achieved by dopamine chemistry. The separation performance of the membranes was systematically investigated under different external pressures. We found that yeast cells can pass through the membranes with a pore diameter smaller than the cell size under a relatively high operating pressure. The isoporous membranes were also applied to the separation of cell mixtures such as yeasts and lactobacilli. A very high flux is obtained under a pressure of as low as 0.004 MPa. Moreover, yeast cells are completely separated from lactobacilli with a rejection ratio of about 100%. The self-assembled isoporous membranes can also be applied in other size-based separation systems with excellent separation performance and reusability, enabling new opportunities in fields such as bio-separation and biosensors.

Graphical abstract: Surface modification of self-assembled isoporous polymer membranes for pressure-dependent high-resolution separation

Supplementary files

Article information

Article type
Paper
Submitted
15 apr 2019
Accepted
14 máj 2019
First published
15 máj 2019

Polym. Chem., 2019,10, 3201-3209

Surface modification of self-assembled isoporous polymer membranes for pressure-dependent high-resolution separation

Y. Ou, D. Zhou, Z. Xu and L. Wan, Polym. Chem., 2019, 10, 3201 DOI: 10.1039/C9PY00560A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements