Issue 21, 2018

Acoustically enhanced photodetection by a black phosphorus–MoS2 van der Waals heterojunction p–n diode

Abstract

We developed a new way to enhance the photoresponsivity of a van der Waals heterojunction p–n diode using surface acoustic waves (SAWs). The diode was constructed on top of a piezoelectric LiNbO3 substrate and composed of p-type black phosphorus (BP) and n-type molybdenum disulfide (MoS2) flakes that partly overlapped with each other. This layout facilitated the applied SAWs to rapidly drive carriers out of the depletion region. In this structural design, SAWs promoted the separation of photogenerated carriers, and thus greatly increased the photocurrent. The measured photocurrent for the device with SAWs was about 103 times higher than that of the device without SAWs. The device using SAWs showed a photoresponsivity as high as 2.17 A W−1 at the wavelength of 582 nm. This excellent performance was attributed to the SAWs suppressing electron–hole recombination in the device under light illumination. Our device exhibits promise as a high-performance photodetector and reveals new possibilities for acoustic devices in optoelectronics.

Graphical abstract: Acoustically enhanced photodetection by a black phosphorus–MoS2 van der Waals heterojunction p–n diode

Supplementary files

Article information

Article type
Paper
Submitted
11 mar 2018
Accepted
09 máj 2018
First published
09 máj 2018

Nanoscale, 2018,10, 10148-10153

Acoustically enhanced photodetection by a black phosphorus–MoS2 van der Waals heterojunction p–n diode

S. Zheng, E. Wu, Z. Feng, R. Zhang, Y. Xie, Y. Yu, R. Zhang, Q. Li, J. Liu, W. Pang, H. Zhang and D. Zhang, Nanoscale, 2018, 10, 10148 DOI: 10.1039/C8NR02022A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements