Issue 19, 2024

Superior-performance lithium–sulfur batteries: a face-centered-cubic-structure high-entropy alloy improves the bidirectional catalytic conversion of polysulfides/sulfides

Abstract

Herein, we demonstrate a face-centered cubic-structure cobalt–nickel–copper–manganese–molybdenum high-entropy alloy (CoNiCuMnMo-HEA) anchored on a reduced graphene oxide (rGO) substrate as a separator intercalation layer (CoNiCuMnMo-HEA@rGO) for lithium–sulfur batteries. The CoNiCuMnMo-HEA catalyst possesses abundant exposed polymetallic sites and exhibits a strong interaction with polysulfides on the (111) densest stacking surface. Experiments and theoretical calculations prove that Mn and Mo elements play a key role in the reduction process of polysulfides in CoNiCuMnMo-HEA, while Ni and Co are very important in the oxidation process of sulfides. Meanwhile, the presence of Cu element effectively regulates the redox process, which results in HEA exhibiting excellent bidirectional catalysis. As a result, the initial specific discharge capacity of a Li–S battery with the CoNiCuMnMo-HEA@rGO modified membrane can reach 1512.4 mA h g−1 at a rate of 0.2 C. The attenuation rate of each cycle is only 0.055% after 1100 cycles at 3 C, and the coulombic efficiency remains above 91.94%.

Graphical abstract: Superior-performance lithium–sulfur batteries: a face-centered-cubic-structure high-entropy alloy improves the bidirectional catalytic conversion of polysulfides/sulfides

Supplementary files

Article information

Article type
Research Article
Submitted
07 jún 2024
Accepted
23 aug 2024
First published
27 aug 2024

Inorg. Chem. Front., 2024,11, 6425-6437

Superior-performance lithium–sulfur batteries: a face-centered-cubic-structure high-entropy alloy improves the bidirectional catalytic conversion of polysulfides/sulfides

X. Wang, P. Lin, C. Wu, Y. Zhu, C. Wang, D. Guo, X. Chen and S. Wang, Inorg. Chem. Front., 2024, 11, 6425 DOI: 10.1039/D4QI01434K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements