Issue 42, 2022

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Abstract

Excessive reliance on fossil fuels has led to the release and accumulation of large quantities of CO2 into the atmosphere which has raised serious concerns related to environmental pollution and global warming. One way to mitigate this problem is to electrochemically recycle CO2 to value-added chemicals or fuels using electricity from renewable energy sources. Cu is the only metallic electrocatalyst that has been shown to produce a wide range of industrially important chemicals at appreciable rates. However, low product selectivity is a fundamental issue limiting commercial applications of electrochemical CO2 reduction over Cu catalysts. Combining copper with other metals that actively contribute to the electrochemical CO2 reduction reaction process can selectively facilitate generation of desirable products. Alloying Cu can alter surface binding strength through electronic and geometric effects, enhancing the availability of surface confined carbon species, and stabilising key reduction intermediates. As a result, significant research has been undertaken to design and fabricate copper-based alloy catalysts with structures that can enhance the selectivity of targeted products. In this article, progress with use of alloying strategies for development of Cu-alloy catalysts are reviewed. Challenges in achieving high selectivity and possible future directions for development of new copper-based alloy catalysts are considered.

Graphical abstract: Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Article information

Article type
Review Article
Submitted
28 jún 2022
Accepted
05 okt 2022
First published
07 okt 2022

Nanoscale, 2022,14, 15560-15585

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

V. S. S. Mosali, A. M. Bond and J. Zhang, Nanoscale, 2022, 14, 15560 DOI: 10.1039/D2NR03539A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements