Issue 43, 2020

Large-area printed low-voltage organic thin film transistors via minimal-solution bar-coating

Abstract

Herein, we report on the fabrication of large-area printed low-voltage organic thin film transistor arrays via minimal-solution bar-coating. We established the bar-coating of the chemically cross-linked polymer dielectric based on poly(4-vinylphenol) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride by investigating the effects of composition, reaction and printing conditions on film thickness, cross-linking efficacy, and dielectric properties. Subsequently, we elucidated various aspects of large-area (up to 4-inch wafer) bar-coated cross-linked polymeric dielectric prepared from minimal solution (∼100 μL, ∼1.2 μL cm−2) by addressing film uniformity, thickness control, capacitance variation, underlying step coverage, patternability, etc. The resultant polymeric dielectric exhibited good insulating properties as exemplified by a low leakage current density of ∼10−8 A cm−2 (at 1 MV cm−1) and a high areal capacitance of 42.6 nF cm−2. Finally, a highly-crystallized organic semiconductor layer based on 2,8-difluorinated 5,11-bis(triethylsilylethynyl)anthradithiophene was deposited on the bar-coated cross-linked polymeric dielectric via bar-coating, leading to the realization of printed low-voltage organic transistor arrays with minimum ink solution wasted.

Graphical abstract: Large-area printed low-voltage organic thin film transistors via minimal-solution bar-coating

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
01 júl 2020
Accepted
29 júl 2020
First published
04 aug 2020

J. Mater. Chem. C, 2020,8, 15112-15118

Large-area printed low-voltage organic thin film transistors via minimal-solution bar-coating

S. Sung, W. Lee, M. M. Payne, J. E. Anthony, C. Kim and M. Yoon, J. Mater. Chem. C, 2020, 8, 15112 DOI: 10.1039/D0TC03089A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements