Issue 35, 2020

In situ unraveling of the effect of the dynamic chemical state on selective CO2 reduction upon zinc electrocatalysts

Abstract

Unraveling the reaction mechanism behind the CO2 reduction reaction (CO2RR) is a crucial step for advancing the development of efficient and selective electrocatalysts to yield valuable chemicals. To understand the mechanism of zinc electrocatalysts toward the CO2RR, a series of thermally oxidized zinc foils is prepared to achieve a direct correlation between the chemical state of the electrocatalyst and product selectivity. The evidence provided by in situ Raman spectroscopy, X-ray absorption spectroscopy (XAS) and X-ray diffraction significantly demonstrates that the Zn(II) and Zn(0) species on the surface are responsible for the production of carbon monoxide (CO) and formate, respectively. Specifically, the destruction of a dense oxide layer on the surface of zinc foil through a thermal oxidation process results in a 4-fold improvement of faradaic efficiency (FE) of formate toward the CO2RR. The results from in situ measurements reveal that the chemical state of zinc electrocatalysts could dominate the product profile for the CO2RR, which provides a promising approach for tuning the product selectivity of zinc electrocatalysts.

Graphical abstract: In situ unraveling of the effect of the dynamic chemical state on selective CO2 reduction upon zinc electrocatalysts

Supplementary files

Article information

Article type
Communication
Submitted
04 máj 2020
Accepted
02 aug 2020
First published
03 aug 2020

Nanoscale, 2020,12, 18013-18021

In situ unraveling of the effect of the dynamic chemical state on selective CO2 reduction upon zinc electrocatalysts

T. Chen, H. Chen, Y. Huang, S. Lin, C. Hou, H. Tan, C. Tung, T. Chan, J. Shyue and H. M. Chen, Nanoscale, 2020, 12, 18013 DOI: 10.1039/D0NR03475D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements