Issue 10, 2020

A dual-trigger-mode ionic hydrogel sensor for contact or contactless motion recognition

Abstract

The intelligent flexible sensors with high responsivity and detectivity are highly desired for wearable devices and human–machine interfaces (HMI). However, the existing sensors are usually limited to onefold detection performance in either contact or noncontact mode. Here, a sandwiched hydrogel capacitive system is designed to fabricate a multi-operational-mode ionic sensor (MOMS) that simultaneously recognizes mechanical stimuli and remote gestures. The novel MOMS performs satisfying sensitivity (1.7 gauge factor and 3.3 Pa−1 pressure sensitivity), rapid response for contactless gesture recognition, a quite wide working range (up to 100 kPa and 300% elongation) and a good touch-free operating distance (40 mm). Moreover, the spatial resolution of the structured sensor array meets the accurate positioning requirements under both contact and touch-free conditions. This is the first time that a capacitive hydrogel system exhibited outstanding performance in detecting contact stimuli and noncontact hand motions at the same time. Hence, the MOMS will allow significant advances in intelligent detection techniques and facilitate innovative thinking for the applications of synchronous monitoring devices.

Graphical abstract: A dual-trigger-mode ionic hydrogel sensor for contact or contactless motion recognition

Supplementary files

Article information

Article type
Communication
Submitted
26 máj 2020
Accepted
06 júl 2020
First published
08 júl 2020

Mater. Horiz., 2020,7, 2673-2682

A dual-trigger-mode ionic hydrogel sensor for contact or contactless motion recognition

Q. Wang, H. Ding, X. Hu, X. Liang, M. Wang, Q. Liu, Z. Li and G. Sun, Mater. Horiz., 2020, 7, 2673 DOI: 10.1039/D0MH00862A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements