Issue 28, 2018

Dynamic interfacial mechanical–thermal characteristics of atomically thin two-dimensional crystals

Abstract

Owing to the flexible nanoelectronic applications of two-dimensional (2D) materials, further exploration of their nanoscale local mechanical properties and their coupled physical characteristics becomes extremely significant. The puckering effect is a typical micro/nanoscale local frictional characteristic generally in the tip–film–substrate system, which is simultaneously expected to be coupled with a dynamic thermal interfacial response. Here, applying scanning thermal microscopy (SThM), we observed a novel mechanical–thermal coupling effect in monolayer/bilayer MoS2 and WS2 films: puckering deformation can induce the enhancement of interfacial thermal resistance (TR). By the SThM method, the puckering effect was further proved to depend on the film thickness and the scan velocity. More importantly, the crystallographic orientation-dependent anisotropy of the puckering effect in atomically thin two-dimensional crystals was demonstrated by SThM. It is inferred that the puckering deformation of the film redistributes the in-plane stress, resulting in the isotropy breaking of the in-plane stiffness. Such new findings are of great significance to help optimize the nanoscale tribological/thermal design and dynamic mechanical–thermal management of 2D-materials in nanoelectronics.

Graphical abstract: Dynamic interfacial mechanical–thermal characteristics of atomically thin two-dimensional crystals

Supplementary files

Article information

Article type
Paper
Submitted
02 máj 2018
Accepted
15 jún 2018
First published
16 jún 2018

Nanoscale, 2018,10, 13548-13554

Dynamic interfacial mechanical–thermal characteristics of atomically thin two-dimensional crystals

K. Xu, S. Ye, L. Lei, L. Meng, S. Hussain, Z. Zheng, H. Zeng, W. Ji, R. Xu and Z. Cheng, Nanoscale, 2018, 10, 13548 DOI: 10.1039/C8NR03586E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements